Johannes Kepler University Linz thesis and dissertation (jkureport)

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Abstract of your thesis in default document language
%% 

\cleardoubleoddpage%  Make sure to start abstract on a new odd page
\begin{abstract*}
Space for your abstract.
\end{abstract*}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Abstract of your thesis in an additional language
%% 

\cleardoubleoddpage%  Make sure to start abstract on a new odd page
\begin{otherlanguage}{ngerman}
\begin{abstract*}
Platz für deine Kurzfassung.
\end{abstract*}
\end{otherlanguage}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
\cleardoubleoddpage%  Make sure to start each chapter on a new odd page
\chapter{Introduction}
\label{sec:introduction}


\section{Motivation}
\label{sec:introduction:motivation}

Space for your introduction.
A typical introduction consists of a motivation for your thesis, your objectives, your research approach, and finishes with an outlook over your work.
Of course, different structuring and naming of sections is possible.


\section{Objectives and Approach}
\label{sec:introduction:objectives}


\section{Outline}
\label{sec:introduction:outline}



%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
\cleardoubleoddpage%  Make sure to start each chapter on a new odd page
\chapter{Example}
\label{sec:example}


\section{How to Start?}
This is an example for another chapter in your thesis.
It should primarily show you some basic \LaTeX\ tricks.
For instance, \autoref{sec:introduction:motivation} references to your motivation.
You can also embed figures, tables, etc.\ in your work.
\autoref{fig:learningcenter} is an example for a figure (i.e.\ photos, diagrams, and other artwork).
Note that figures (just like tables and code listings, see \autoref{tab:nicetable} and \autoref{lst:examplecode}) are floating elements.
They are either placed at the top or bottom of a page (or sometimes stand on their own page), but not in between your text.
You can influence their placement with the placement modifiers ``t'', ``b'', and ``p''.
Bottom placement (``b'') is sometimes more tricky, as \LaTeX\ does not consider this nice in some situations.
You can convince \LaTeX\ to honor your placement expectation with ``!b'' then.
Please be aware that you typically do not want to place a float at the top of a chapter title page.
Since you do not place figures/tables in between your running text, you always need to reference them by their label (e.g.\ \autoref{fig:learningcenter} or \autoref{tab:nicetable}).
\begin{figure}[t]
\centering
\includegraphics[width=\linewidth]{images/jku_learningcenter}
\caption{
    A figure. Be aware that figures have their caption below the artwork.
    Captions may span multiple lines
}\label{fig:learningcenter}
\end{figure}
\begin{table}[b]
\centering
\caption{
    A table. Be aware that tables have their caption above the table.
    Captions may span multiple lines
}\label{tab:nicetable}
\begin{tabularx}{\linewidth}{l>{\raggedright\arraybackslash}X}
\toprule
\textbf{Option}        & \textbf{Description} \\
\midrule
\texttt{phdthesis}     & PhD thesis \\
\texttt{mathesis}      & Master's thesis \\
\texttt{diplomathesis} & Diploma thesis \\
\texttt{bathesis}      & Bachelor's thesis \\
\texttt{seminarreport} & Seminar report \\
\texttt{techreport}    & Technical report \\
\bottomrule
\end{tabularx}
\end{table}
\begin{lstlisting}[language=c,caption={A code listing. Code listings usually have their caption below the code. Captions may span multiple lines},label=lst:examplecode,float]
for (int i = 0; i < 100; ++i) {
    printf("%3d\n", i);
}
\end{lstlisting}
%\begin{listing}
%\begin{minted}{c}
%for (int i = 0; i < 100; ++i) {
%    printf("%3d\n", i);
%}
%\end{minted}
%\caption{
%    A code listing. Code listings usually have their caption below the code.
%    Captions may span multiple lines
%}\label{lst:examplecode}
%\end{listing}

You will often reference and quote other works.
The source of these citations needs to be marked with the \string\cite\{\}\ command.
There are different ways to cite the work of others.
These are a few examples:
\begin{itemize}
\item The Tor directory authority moria1 shows a voting behavior for the HSDir flag that significantly deviates from that of other directory authorities~\cite{bib:2021-hoeller-iiwas}. Be aware that the \string\cite\ command is part of the sentence and, hence, comes before the period.
\item \citeauthor{bib:2015-roland-thesis-book}~\cite{bib:2015-roland-thesis-book} proposes a novel attack concept against NFC secure elements in mobile phones.
\item \citeauthor{bib:2013-roland-woot}~\cite{bib:2013-roland-woot} uncovered a flaw in legacy-support of the MasterCard contactless payment protocols that allows an attacker to clone certain credit cards.
\item \citeauthor{bib:2021-hoeller-foci}~\cite{bib:2021-hoeller-foci} designed an experiment to measure the usage of Tor V3 onion services in a privacy-conscious way. Here we used ``et al.'' because the cited work has more than two authors (\string\citeauthor\ will automatically take care of this).
\item \citeauthor{bib:2021-hoeller-iiwas}~\cite{bib:2021-hoeller-iiwas} conclude:
\begin{quote}
\emph{Ultimately, the high fluctuations in the hidden service directory were caused by a mixture of several issues. First the changed voting behavior of three directory authorities reduced the amount of obtainable votes to six. If any of the remaining six relays went offline -- which tends to happen during ongoing DOS attacks -- relays needed to obtain five out of five available votes. So any individual measurement failure regarding either bandwidth or uptime led to a withdrawn HSDir flag.}
\end{quote}
\item You sometimes also paraphrase from multiple sources. For that purpose, the \string\cite\ command accepts a list of multiple comma-separated references. Do not add spaces in between them. Various analyses of the Tor network have been performed recently~\cite{bib:2021-hoeller-foci,bib:2021-hoeller-iiwas}. 
\end{itemize}
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
\cleardoubleoddpage%  Make sure to start each chapter on a new odd page
\chapter{Conclusion and Outlook}
\label{sec:conclusion}

Space for your summary, central conclusions, and an outlook on potential future work.



%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
\cleardoubleoddpage%  Make sure to start each chapter on a new odd page
\chapter{An Appendix}
\label{app:an-appendix}

Space for an appendix.
You can have more than one appendix chapter.
Appendices are, of course, optional.



%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\ProvidesFile{ACM-Reference-Format.bbx}[2021-09-29 v0.2 biblatex bibliography style]

% Inherit a default style
\RequireBibliographyStyle{trad-plain}



%%% Localisation strings for ACM

\DefineBibliographyStrings{american}{%
  bathesis = {Bachelor's thesis},
  mathesis = {Master's thesis},
  phdthesis = {PhD thesis},
  editor = {(Ed\adddot)},
  editors = {(Eds\adddot)},
  edition = {ed\adddot},
  page = {p\adddot},
  pages = {pp\adddot},
}

\DefineBibliographyStrings{english}{%
  bathesis = {Bachelor's thesis},
  mathesis = {Master's thesis},
  phdthesis = {PhD thesis},
  editor = {(Ed\adddot)},
  editors = {(Eds\adddot)},
  edition = {ed\adddot},
  page = {p\adddot},
  pages = {pp\adddot},
}



%%% Formatting for fields

%\DeclareFieldFormat
%  [article,inbook,incollection,inproceedings,patent,thesis,unpublished]
%  {title}{#1}

% Do not change title to sentence case (keep capitalization of all words)
\DeclareFieldFormat{titlecase}{#1}

%\DeclareFieldFormat{pages}{#1}

\DeclareFieldFormat{numpages}{#1 pages}

\DeclareFieldFormat{number}{#1}

\DeclareFieldFormat{articleno}{Article #1}

\DeclareFieldFormat{key}{#1}

\DeclareFieldFormat{urldate}{Retrieved\space{}#1\space{}from}
\DeclareFieldAlias{lastaccessed}{urldate}

\DeclareFieldFormat{url}{\url{#1}}

\DeclareFieldFormat{edition}{%
  \printtext[parens]{\ifinteger{#1}
    {\mkbibordedition{#1}~\bibstring{edition}}
    {#1\isdot~\bibstring{edition}}}}


% Handle urls field containing 'and' separated list of URLs
% https://github.com/plk/biblatex/issues/229
\DeclareListFormat{urls}{%
  \url{#1}%
  \ifthenelse{\value{listcount}<\value{liststop}}
    {\addcomma\space}
    {}}
\renewbibmacro*{url}{\iffieldundef{url}{\printlist{urls}}{\printfield{url}}}



%%% Bibmacro definitions

\renewbibmacro*{translator+others}{%
  \ifboolexpr{
    test \ifusetranslator
    and
    not test {\ifnameundef{translator}}
  }
    {\printnames{translator}%
     \setunit{\addcomma\space}%
     \usebibmacro{translator+othersstrg}%
     \clearname{translator}}
    {\printfield{key}}}

\newbibmacro*{year}{%
  \iffieldundef{year}%
    {\printtext{[n.\ d.]}}%
    {\printfield{year}}%
}

\renewbibmacro*{date}{\printtext[parens]{\printdate}}


\renewbibmacro*{url+urldate}{\iffieldundef{urlyear}
    {}
    {\usebibmacro{urldate}%
     \setunit*{\addspace}}%
     \usebibmacro{url}%
  }


\renewbibmacro*{journal+issuetitle}{%
  \usebibmacro{journal}%
  \setunit*{\addcomma\space}%
  \iffieldundef{series}
    {}
    {\newunit%
     \printfield{series}%
     \setunit{\addspace}}%
  \usebibmacro{volume+number+date+pages+eid}%
  \newcommaunit%
%  \setunit{\addspace}%
  \usebibmacro{issue-issue}%
  \setunit*{\addcolon\space}%
  \usebibmacro{issue}%
  \newunit}



\newbibmacro*{volume+number+date+pages+eid}{%
  \printfield{volume}%
  \setunit*{\addcomma\space}%
  \printfield{number}%
  \setunit*{\addcomma\space}%
  \printfield{articleno}
  \setunit{\addcomma\space}
  \usebibmacro{date-ifmonth}
  \setunit{\addcomma\space}%
  \iffieldundef{pages}%
    {\printfield{numpages}}%
    {\printfield{pages}}%
  \newcommaunit%
  \printfield{eid}}%

\renewbibmacro*{chapter+pages}{%
  \printfield{chapter}%
  \setunit{\bibpagespunct}%
  \iffieldundef{pages}%
    {\printfield{numpages}}%
    {\printfield{pages}}%
  \newunit}

\renewbibmacro*{editor+others}{%
  \ifboolexpr{
    test \ifuseeditor
    and
    not test {\ifnameundef{editor}}
  }
    {\printnames{editor}%
     \setunit{\addcomma\space}%
     \usebibmacro{editor+othersstrg}%
     \clearname{editor}}
    {\iflistundef{organization}{}{\printlist{organization}}}}


\newbibmacro*{issue-issue}{%
  \iffieldundef{issue}%
    {}%
    {\printfield{issue}%
     \setunit*{\addcomma\space}%
     \usebibmacro{date-ifmonth}%
    }%
  \newunit}




\newbibmacro*{maintitle+booktitle+series+number}{%
  \iffieldundef{maintitle}
    {}
    {\usebibmacro{maintitle}%
     \newunit\newblock
     \iffieldundef{volume}
       {}
       {\printfield{volume}%
        \printfield{part}%
        \setunit{\addcolon\space}}}%
  \usebibmacro{booktitle}%
  \setunit*{\addspace}
  \iffieldundef{series}
    {}
    {\printtext[parens]{%
	   \printfield{series}%
       \setunit*{\addcomma\space}%
	   \printfield{volume}}%
     \setunit*{\addcomma\space}}%
  \printfield{number}%
  \setunit*{\addcomma\space}%
  \printfield{articleno}
  \newunit
  }

\renewbibmacro*{booktitle}{%
  \ifboolexpr{
    test {\iffieldundef{booktitle}}
    and
    test {\iffieldundef{booksubtitle}}
  }
    {}
    {\printtext[booktitle]{%
       \printfield[titlecase]{booktitle}%
       \iffieldundef{booksubtitle}{}{
       \setunit{\subtitlepunct}%
       \printfield[titlecase]{booksubtitle}}%
       }%
    }%
  \printfield{booktitleaddon}}

\renewbibmacro*{volume+number+eid}{%
  \printfield{volume}%
  \setunit*{\addcomma\space}%
  \printfield{number}%
  \setunit*{\addcomma\space}%
  \printfield{articleno}
  \setunit{\addcomma\space}%
  \printfield{eid}}


\renewbibmacro*{publisher+location+date}{%
  \printlist{publisher}%
  \setunit*{\addcomma\space}%
  \printlist{location}%
  \setunit*{\addcomma\space}%
  \usebibmacro{date-ifmonth}%
  \newunit}


\newbibmacro{date-ifmonth}{%
  \iffieldundef{month}{}{%
    \usebibmacro{date}
  }%
}


\renewbibmacro*{institution+location+date}{%
  \printlist{school}%
  \setunit*{\addcomma\space}%
  \printlist{institution}%
  \setunit*{\addcomma\space}%
  \printlist{location}%
  \setunit*{\addcomma\space}%
  \usebibmacro{date-ifmonth}%
  \newunit}


\renewbibmacro*{periodical}{%
  \iffieldundef{title}
    {}
    {\printtext[title]{%
       \printfield[titlecase]{title}%
       \setunit{\subtitlepunct}%
       \printfield[titlecase]{subtitle}}}%
       \newunit%
       \usebibmacro{journal}}

\renewbibmacro*{issue+date}{%
    \iffieldundef{issue}
      {\usebibmacro{date}}
      {\printfield{issue}%
       \setunit*{\addspace}%
       \usebibmacro{date}}%
  \newunit}

\renewbibmacro*{title+issuetitle}{%
  \usebibmacro{periodical}%
  \setunit*{\addspace}%
  \iffieldundef{series}
    {}
    {\newunit
     \printfield{series}%
     \setunit{\addspace}}%
  \printfield{volume}%
  \setunit*{\addcomma\space}%
  \printfield{number}%
  \setunit*{\addcomma\space}%
  \printfield{articleno}
  \setunit{\addcomma\space}%
  \printfield{eid}%
  \setunit{\addspace}%
  \usebibmacro{issue+date}%
  \setunit{\addcolon\space}%
  \usebibmacro{issue}%
  \newunit}




%%% Definitions for drivers (alphabetical)



\DeclareBibliographyDriver{article}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/translator+others}%
  \setunit{\labelnamepunct}\newblock%
  \usebibmacro{year}%
  \newunit%
  \usebibmacro{title}%
  \newunit%
  \printlist{language}%
  \newunit\newblock%
  \usebibmacro{byauthor}%
  \newunit\newblock%
  \usebibmacro{bytranslator+others}%
  \newunit\newblock%
  \printfield{version}%
  \newunit\newblock%
  \usebibmacro{journal+issuetitle}%
  \newunit%
  \usebibmacro{byeditor+others}%
  \newunit%
  \printfield{note}%
  \newunit\newblock%
  \iftoggle{bbx:isbn}
    {\printfield{issn}}
    {}%
  \newunit\newblock%
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock%
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock%
  \usebibmacro{related}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{book}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/editor+others/translator+others}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}%
  \newunit%
  \usebibmacro{maintitle+title}%
  \newunit%
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{byeditor+others}%
  \newunit\newblock
  \printfield{edition}%
  \newunit
  \usebibmacro{series+number}%
  \iffieldundef{maintitle}
    {\printfield{volume}%
     \printfield{part}}
    {}%
  \newunit
  \newunit\newblock
  \printfield{volumes}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \usebibmacro{publisher+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit
  \printfield{pagetotal}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isbn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{inbook}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \iffieldundef{author}%
    {\usebibmacro{byeditor+others}}%
    {\usebibmacro{author/translator+others}}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit\newblock
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
%  \usebibmacro{in:}%
  \usebibmacro{bybookauthor}%
  \newunit\newblock
  \usebibmacro{maintitle+booktitle}%
  \newunit\newblock
  \iffieldundef{author}{}%if undef then we already printed editor
    {\usebibmacro{byeditor+others}}%
  \newunit\newblock
  \printfield{edition}%
  \newunit
  \iffieldundef{maintitle}
    {\printfield{volume}%
     \printfield{part}}
    {}%
  \newunit
  \printfield{volumes}%
  \newunit\newblock
  \usebibmacro{series+number}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \usebibmacro{publisher+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isbn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{incollection}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/translator+others}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit\newblock
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{in:}%
  \usebibmacro{maintitle+booktitle}%
  \newunit\newblock
  \usebibmacro{series+number}%
  \newunit\newblock
  \printfield{edition}%
  \newunit
  \iffieldundef{maintitle}
    {\printfield{volume}%
     \printfield{part}}
    {}%
  \newunit
  \printfield{volumes}%
  \newunit\newblock
  \usebibmacro{byeditor+others}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \usebibmacro{publisher+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isbn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{inproceedings}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/translator+others}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit\newblock
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{in:}%
  \usebibmacro{maintitle+booktitle+series+number}%
  \newunit\newblock
  \usebibmacro{event+venue+date}%
  \newunit\newblock
  \usebibmacro{byeditor+others}%
  \newunit\newblock
  \iffieldundef{maintitle}
    {\iffieldundef{series}{\printfield{volume}}{}%
     \printfield{part}}
    {}%
  \newunit
  \printfield{volumes}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \printlist{organization}%
  \newunit
  \usebibmacro{publisher+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isbn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{manual}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/editor+others}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit\newblock
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{byeditor}%
  \newunit\newblock
  \printfield{edition}%
  \newunit\newblock
  \usebibmacro{series+number}%
  \newunit\newblock
  \printfield{type}%
  \newunit
  \printfield{version}%
  \newunit
  \printfield{note}%
  \newunit\newblock
  \printlist{organization}%
  \newunit
  \usebibmacro{publisher+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit
  \printfield{pagetotal}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isbn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{misc}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/editor+others/translator+others}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit\newblock
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{byeditor+others}%
  \newunit\newblock
  \printfield{howpublished}%
  \newunit\newblock
  \printfield{type}%
  \newunit
  \printfield{version}%
  \newunit
  \printfield{note}%
  \newunit\newblock
  \usebibmacro{organization+location+date}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{online}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author/editor+others/translator+others}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{byeditor+others}%
  \newunit\newblock
  \printfield{version}%
  \newunit
  \printfield{note}%
  \newunit\newblock
  \printlist{organization}%
  \newunit\newblock
  \usebibmacro{date-ifmonth}%
  \newunit\newblock
  \iftoggle{bbx:eprint}
    {\usebibmacro{eprint}}
    {}%
  \newunit\newblock
  \usebibmacro{url+urldate}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareFieldFormat[patent]{number}{Patent No.~#1}

\DeclareBibliographyDriver{patent}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}%
  \newunit
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \usebibmacro{date}%
  \newunit\newblock
  \printfield{type}%
  \setunit*{\addspace}%
  \printfield{number}%
  \iflistundef{location}
    {}
    {\setunit*{\addspace}%
     \printtext[parens]{%
       \printlist[][-\value{listtotal}]{location}}}%
  \newunit\newblock
  \usebibmacro{byholder}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{periodical}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{editor}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit
  \usebibmacro{title+issuetitle}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byeditor}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{issn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{report}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \printfield{type}%
  \setunit*{\addspace}%
  \printfield{number}%
  \newunit\newblock
  \printfield{version}%
  \newunit
  \printfield{note}%
  \newunit\newblock
  \usebibmacro{institution+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit
  \printfield{pagetotal}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isrn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}



\DeclareBibliographyDriver{thesis}{%
  \usebibmacro{bibindex}%
  \usebibmacro{begentry}%
  \usebibmacro{author}%
  \setunit{\labelnamepunct}\newblock
  \usebibmacro{year}
  \newunit
  \usebibmacro{title}%
  \newunit
  \printlist{language}%
  \newunit\newblock
  \usebibmacro{byauthor}%
  \newunit\newblock
  \printfield{type}%
  \newunit
  \usebibmacro{institution+location+date}%
  \newunit\newblock
  \usebibmacro{chapter+pages}%
  \newunit
  \printfield{pagetotal}%
  \newunit\newblock
  \iftoggle{bbx:isbn}
    {\printfield{isbn}}
    {}%
  \newunit\newblock
  \usebibmacro{doi+eprint+url}%
  \newunit\newblock
  \usebibmacro{addendum+pubstate}%
  \setunit{\bibpagerefpunct}\newblock
  \usebibmacro{pageref}%
  \newunit\newblock
  \printfield{note}%
  \newunit\newblock
  \iftoggle{bbx:related}
    {\usebibmacro{related:init}%
     \usebibmacro{related}}
    {}%
  \usebibmacro{finentry}}

83 KB — too long to show here. It arrives with the project.

\ProvidesFile{ACM-Reference-Format.cbx}[2021-09-29 v0.2 biblatex bibliography style]

\RequireCitationStyle{numeric}

\endinput

% Teach biblatex about numpages field
\DeclareDatamodelFields[type=field, datatype=literal]{numpages}
\DeclareDatamodelEntryfields{numpages}

% Teach biblatex about articleno field
\DeclareDatamodelFields[type=field, datatype=literal]{articleno}
\DeclareDatamodelEntryfields{articleno}

% Teach biblatex about urls field
\DeclareDatamodelFields[type=list, datatype=uri]{urls}
\DeclareDatamodelEntryfields{urls}

% Teach biblatex about school field
\DeclareDatamodelFields[type=list, datatype=literal]{school}
\DeclareDatamodelEntryfields[thesis]{school}

\DeclareDatamodelFields[type=field, datatype=literal]{key}
\DeclareDatamodelEntryfields{key}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Acknowledgements for your thesis in default document language
%% 

\cleardoubleoddpage%  Make sure to start acknowledgements on a new odd page
\begin{acks*}
Space for your acknowledgements.
\end{acks*}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% List of acronyms (based on the acronyms package)
%% 

\addchap{\acronymname}
\begin{acronym}
    \acro{NFC}{Near Field Communication}
    % Once defined here, you can use \ac{NFC} / \Ac{NFC} / \acf{NFC} / etc. to reference this acronym
\end{acronym}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

Copyright 2006 The Inconsolata Project Authors

This Font Software is licensed under the SIL Open Font License, Version 1.1.
This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL


-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------

PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font creation
efforts of academic and linguistic communities, and to provide a free and
open framework in which fonts may be shared and improved in partnership
with others.

The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded, 
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply
to any document created using the fonts or their derivatives.

DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.

"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).

"Original Version" refers to the collection of Font Software components as
distributed by the Copyright Holder(s).

"Modified Version" refers to any derivative made by adding to, deleting,
or substituting -- in part or in whole -- any of the components of the
Original Version, by changing formats or by porting the Font Software to a
new environment.

"Author" refers to any designer, engineer, programmer, technical
writer or other person who contributed to the Font Software.

PERMISSION & CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed, modify,
redistribute, and sell modified and unmodified copies of the Font
Software, subject to the following conditions:

1) Neither the Font Software nor any of its individual components,
in Original or Modified Versions, may be sold by itself.

2) Original or Modified Versions of the Font Software may be bundled,
redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.

3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the corresponding
Copyright Holder. This restriction only applies to the primary font name as
presented to the users.

4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.

5) The Font Software, modified or unmodified, in part or in whole,
must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created
using the Font Software.

TERMINATION
This license becomes null and void if any of the above conditions are
not met.

DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.

Copyright 2006 The Inconsolata Project Authors

This Font Software is licensed under the SIL Open Font License, Version 1.1.
This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL


-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------

PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font creation
efforts of academic and linguistic communities, and to provide a free and
open framework in which fonts may be shared and improved in partnership
with others.

The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded, 
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply
to any document created using the fonts or their derivatives.

DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.

"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).

"Original Version" refers to the collection of Font Software components as
distributed by the Copyright Holder(s).

"Modified Version" refers to any derivative made by adding to, deleting,
or substituting -- in part or in whole -- any of the components of the
Original Version, by changing formats or by porting the Font Software to a
new environment.

"Author" refers to any designer, engineer, programmer, technical
writer or other person who contributed to the Font Software.

PERMISSION & CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed, modify,
redistribute, and sell modified and unmodified copies of the Font
Software, subject to the following conditions:

1) Neither the Font Software nor any of its individual components,
in Original or Modified Versions, may be sold by itself.

2) Original or Modified Versions of the Font Software may be bundled,
redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.

3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the corresponding
Copyright Holder. This restriction only applies to the primary font name as
presented to the users.

4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.

5) The Font Software, modified or unmodified, in part or in whole,
must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created
using the Font Software.

TERMINATION
This license becomes null and void if any of the above conditions are
not met.

DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.

Copyright 2016 The Merriweather Project Authors (https://github.com/EbenSorkin/Merriweather), with Reserved Font Name "Merriweather".

This Font Software is licensed under the SIL Open Font License, Version 1.1.
This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL


-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------

PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font creation
efforts of academic and linguistic communities, and to provide a free and
open framework in which fonts may be shared and improved in partnership
with others.

The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded, 
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply
to any document created using the fonts or their derivatives.

DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.

"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).

"Original Version" refers to the collection of Font Software components as
distributed by the Copyright Holder(s).

"Modified Version" refers to any derivative made by adding to, deleting,
or substituting -- in part or in whole -- any of the components of the
Original Version, by changing formats or by porting the Font Software to a
new environment.

"Author" refers to any designer, engineer, programmer, technical
writer or other person who contributed to the Font Software.

PERMISSION & CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed, modify,
redistribute, and sell modified and unmodified copies of the Font
Software, subject to the following conditions:

1) Neither the Font Software nor any of its individual components,
in Original or Modified Versions, may be sold by itself.

2) Original or Modified Versions of the Font Software may be bundled,
redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.

3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the corresponding
Copyright Holder. This restriction only applies to the primary font name as
presented to the users.

4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.

5) The Font Software, modified or unmodified, in part or in whole,
must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created
using the Font Software.

TERMINATION
This license becomes null and void if any of the above conditions are
not met.

DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.

Copyright (c) 2015, Pablo Impallari, Rodrigo Fuenzalida (Modified by Dan O. Williams and USWDS) (https://github.com/uswds/public-sans)

This Font Software is licensed under the SIL Open Font License, Version 1.1.
This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL


-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------

PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font creation
efforts of academic and linguistic communities, and to provide a free and
open framework in which fonts may be shared and improved in partnership
with others.

The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded, 
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply
to any document created using the fonts or their derivatives.

DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.

"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).

"Original Version" refers to the collection of Font Software components as
distributed by the Copyright Holder(s).

"Modified Version" refers to any derivative made by adding to, deleting,
or substituting -- in part or in whole -- any of the components of the
Original Version, by changing formats or by porting the Font Software to a
new environment.

"Author" refers to any designer, engineer, programmer, technical
writer or other person who contributed to the Font Software.

PERMISSION & CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed, modify,
redistribute, and sell modified and unmodified copies of the Font
Software, subject to the following conditions:

1) Neither the Font Software nor any of its individual components,
in Original or Modified Versions, may be sold by itself.

2) Original or Modified Versions of the Font Software may be bundled,
redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.

3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the corresponding
Copyright Holder. This restriction only applies to the primary font name as
presented to the users.

4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.

5) The Font Software, modified or unmodified, in part or in whole,
must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created
using the Font Software.

TERMINATION
This license becomes null and void if any of the above conditions are
not met.

DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.

101 KB — too long to show here. It arrives with the project.

% !TeX program = xelatex
% !TeX encoding = UTF-8
% !TeX spellcheck = en_US
% !BIB program = biber
%% 
%% The above lines help editors like TeXstudio to automatically choose the right tools
%% to compile your LaTeX source file. If you want to use packages like minted that need
%% to execute shell commands, you may need to change the TeX program above to, e.g.
%% txs:///xelatex/[-shell-escape]
%% If your tool does not support these magic comments, you will need to make appropriate
%% manual choices.
%% 
%% You can safely use "pdflatex" instead of "xelatex" if you prefer the pdfLaTeX toolchain.
%% However, pdfLaTeX will not be able to deliver the professional font experience that you
%% will get with XeLaTeX. You can also safely use "lualatex" instead of "xelatex" while
%% preserving the professional font experience if you prefer the LuaLaTeX toolchain.
%% 
%% _Important_: These magic comments should be on the first lines of your source file.
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%%            JJJJ   K                         K   UUUU         UUUU  
%%            JJJJ   KKKK                   KKKK   UUUU         UUUU  
%%            JJJJ   KKKKKK               KKKKKK   UUUU         UUUU  
%%            JJJJ      KKKKKK         KKKKKK      UUUU         UUUU  
%%            JJJJ         KKKKKK   KKKKKK         UUUU         UUUU  
%%            JJJJ            KKKKKKKKK            UUUU         UUUU  
%%    JJ     JJJJJ               KKK               UUUUU       UUUUU  
%%  JJJJJJJJJJJJJ    KKKKKKKKKKKKKKKKKKKKKKKKKKK    UUUUUUUUUUUUUUU   
%%    JJJJJJJJJ      KKKKKKKKKKKKKKKKKKKKKKKKKKK      UUUUUUUUUUU     
%% 
%% This is an example file for using the JKU LaTeX technical report template
%% for your thesis.
%% 
%% Template created by Michael Roland (2021)
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Document class: This is a koma-script book.
%% 
\documentclass[a4paper,oneside,10pt,ngerman,english]{scrbook}
%% 
%% The comma-separated list in square brackets are class options.
%% Useful options that you might want to use:
%% 
%% Paper size:
%%  * a4paper ... A4 paper size
%% 
%% Optimize for single-sided or double-sided printing:
%%  * oneside ... single-sided
%%  * twoside ... double-sided
%% 
%% Base font size:
%%  * 10pt ... 10-pt font is used for normal text
%%  * 11pt ... 11-pt font is used for normal text
%% 
%% Define document languages (the last specified language becomes the document default
%% language):
%%  * ngerman ... German
%%  * english ... English
%%  * ...
%% 
%% Alternate document classes: While the JKU report template supports the koma-script classes
%% `scrartcl', `scrreprt' and `scrbook', your should always use the book class `scrbook' for
%% your thesis.
%%  
%% _Important_: The document class should be the first line of LaTeX code in your main
%% source file. Do not place anything but comments / magic comments above that line (unless
%% you really know what you are doing).
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Treat input files as UTF-8 encoded. Make sure to always load this when you use pdfLaTeX
%% so that pdfLaTeX knows how to read and interpret characters in this source file.
%% 
\usepackage[utf8]{inputenc}
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Use the JKU LaTeX technical report template for this document.
%% 
\usepackage[mathesis,fancyfonts,mathastext]{jkureport}
%% 
%% The comma-separated list in square brackets are theme options. Useful options that you
%% might want to use:
%% 
%% Document type:
%%  * phdthesis     ... PhD thesis.
%%  * mathesis      ... Master's thesis.
%%  * diplomathesis ... Diploma thesis.
%%  * bathesis      ... Bachelor's thesis.
%%  * seminarreport ... Seminar report.
%%  * techreport    ... Technical report.
%% 
%% Color scheme selection options:
%%  * JKU  ... Use JKU (gray) color scheme (this is the default if no scheme is selected).
%%  * BUS  ... Use Business School color scheme.
%%  * LIT  ... Use Linz Institute of Technology color scheme.
%%  * MED  ... Use MED faculty color scheme.
%%  * RE   ... Use RE faculty color scheme.
%%  * SOE  ... Use School of Education color scheme.
%%  * SOWI ... Use SOWI faculty color scheme.
%%  * TNF  ... Use TNF faculty color scheme.
%% 
%% Space-efficient monospace font options (requires XeTeX/LuaTeX):
%%  * compactmono   ... Use condensed fixed-width font everywhere.
%%  * nocompactverb ... Do not use condensed fixed-width font for verbatim and listings.
%% 
%% Style-breaking options:
%%  * noimprint      ... Do not insert imprint on title pages.
%%  * nojkulogo      ... Do not insert JKU & K logos on title pages.
%%  * capstitle      ... Set document title in capital letters.
%%  * nofancyfonts   ... Do not use custom TTF fonts with XeTeX/LuaTeX / supress pdfLaTeX warning.
%%  * equalmargins   ... Decrease the outer page margin to have both page margins of equal size
%%                       (the additional outer margin is intentional and to be used for
%%                       anotations; equalmargins also causes the text width to be
%%                       significantly larger than optimal for reading).
%% 
%% Experimental options:
%%  * mathastext ... Use standard document fonts (enhanced with symbols from Fira Math font
%%                   when using XeTeX/LuaTeX) in math mode.
%% 
%% Advanced options:
%%  * legacymode={<mode>} ... Activate a legacy mode to account for previous formal requirements,
%%                            styles, and/or features. May be specified mutliple times to activate
%%                            multiple legacy modes. The following <mode>s are supported:
%%      - phd2021             ... Adapt cover sheet to formal requirements for unstructured
%%                                doctoral programs before 2021W (also accounts for change from
%%                                "Beurteiler*in" to "Betreuer*in" in 2024W versions of the German
%%                                thesis cover sheets)
%%  * noautopdfinfo       ... Do not automatically try to add pdfinfo with hyperref from document
%%                            metadata fields.
%%  * logopath={<path>}   ... Set the path where the theme can find its own logo resources. This
%%                            should typically be a relative path and the default is `./logos'.
%%  * fontpath={<path>}   ... Set the path where the theme can find its own font resources. This
%%                            should typically be a relative path and the default is `./fonts'.
%% 
%% Hint: Boolean options can be used in the forms `option' or `option=true' the enable the
%% option and `nooption' or `option=false' to disable the option.
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% This is the place where you can load additional packages. If you want to load
%% a package `biblatex', you would use the command `\usepackage{biblatex}'.
%% 

%\usepackage{minted} %% alternative package for code listings (also see notice about TeX program above!)
\usepackage{csquotes}
\usepackage[backend=biber,citestyle=numeric,sortcites=true,maxcitenames=2,style=ACM-Reference-Format]{biblatex}
\setcounter{biburlnumpenalty}{100} %% reducing biburl* penalties typically improves URL placement in bibliography
\setcounter{biburllcpenalty}{100}
\setcounter{biburlucpenalty}{100}
\usepackage{todonotes}
\usepackage{import}
\usepackage{amsfonts}
\usepackage{subfigure}
%\usepackage{acronym}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Bibliography data files.
%% 

\addbibresource{references.bib}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{document}
%% Begin with the frontmatter (among other things, this switches to roman page numbers)
\frontmatter

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Thesis information and title page
%% 

%% Command \title{title}: sets the title of your thesis
\title{Your paper}

%% Command \titleshort{short title}: sets an abbreviated version of the thesis title for page heads
%\titleshort{Optional space for your abbreviated title}

%% Command \subtitle{subtitle}: sets the subtitle for seminar/technical reports (not used for theses)
%\subtitle{Seminar Report}

%% Command \author{name}: sets the author's name; use \prefix{} and \suffix{} to add academic titles
%%   and suffixes, use \matno{} to add the immatriculation number
\author{\prefix{DI} Firstname~Lastname \suffix{BSc}\matno{12345678}}

%% Command \supervisor[number,gender]{name}: sets the name of the supervisor (where number optionally
%%   defines the rank of the supervisor (1-3) and gender specifies if the supervisor is male (m) or
%%   female (f/w) to adapt gender-specific terms in German)
\supervisor{\prefix{Prof. Dr.} Firstname~Lastname}

%% Command \assistantsupervisor{name}: sets the name of the assistant supervisor(s)
\assistantsupervisor{\prefix{Dr.} Firstname~Lastname \suffix{MSc}}

%% Command \degree{degree}{degree program}: sets the degree and degree program name
\degree{Master of Science}{Computer Science}
%% Please make sure to insert the _correct_ degree and degree program names for your studies before
%% submission. Examples for degrees at JKU:
%%  * Diplom-Ingenieurin / Diplom-Ingenieur
%%  * Doctor medicinae universae
%%  * Master of Arts
%%  * Master of Laws
%%  * Master of legal and business aspects in technics
%%  * Master of Science
%%  * Master of Science in Digital Business Management
%%  * Master of Science Global Business
%%  * Master of Social Sciences
%%  * Doktorin / Doktor der Geistes- und Kulturwissenschaften
%%  * Doktorin / Doktor der Medizinischen Wissenschaften
%%  * Doktorin / Doktor der Naturwissenschaften
%%  * Doktorin / Doktor der Rechtswissenschaften
%%  * Doktorin / Doktor der Sozial- und Wirtschaftswissenschaften
%%  * Doktorin / Doktor der technischen Wissenschaften
%%  * Doctor of Philosophy

%% Command \submissiondepartment{institute or department}: set the department that the thesis is submitted at
\submissiondepartment{Institute of Networks~and~Security}

%% Command \date{YYYY-MM-DD}: set the day of submission (defaults to today)
%\date{2020-04-09}

%% Command \keywords{text}: set the document keywords
%\keywords{Space for your comma-separated keywords}


%% Finally, print the title page using the above information:
\maketitle
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Include your abstract into the frontmatter
%% 

\import{./}{00-abstract}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Include your acknowledgements into the frontmatter (optional and typically only
%% used to acknowledge external funding, discuss with your supvervisor if unsure)
%% 

%\import{./}{acknowledgements}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Add a table of contents (and optionally various other lists)
%% 

%% Make sure to start the table of contents on a new odd page (odd is only relevant in twoside layout)
\cleardoubleoddpage
%% Print the table of contents
\tableofcontents

%% Make sure to start the list of tables on a new odd page (odd is only relevant in twoside layout)
%\cleardoubleoddpage
%% Print the list of tables (optional and often not necessary)
%\listoftables

%% Make sure to start the list of figures on a new odd page (odd is only relevant in twoside layout)
%\cleardoubleoddpage
%% Print the list of figures (optional and often not necessary)
%\listoffigures

%% Make sure to start the list of acronyms on a new odd page (odd is only relevant in twoside layout)
%\cleardoubleoddpage
%% Include list of acronyms (optional and often not necessary)
%\import{./}{acronyms}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%% Begin with the mainmatter (among other things, this switches to arabic page numbers)
\mainmatter

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Include your chapters
%% 

\import{./}{01-introduction}
\import{./}{02-example}
% ...
\import{./}{09-conclusion}

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Print the bibliography
%% 
%% Make sure to start the bibliography on a new odd page (odd is only relevant in twoside layout)
\cleardoubleoddpage
\printbibliography
%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%% Begin with the appendix part (all further chapters will be appendices)
\appendix

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% 
%% Include your appendix chapters
%% 

\import{./}{91-appendix}
% ...

%% 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\cleardoubleoddpage

\end{document}
\endinput

@inproceedings{bib:2013-roland-woot,
    title = {{Cloning Credit Cards: A combined pre-play and downgrade attack on EMV Contactless}},
    author = {Roland, Michael and Langer, Josef},
    booktitle = {7th USENIX Workshop on Offensive Technologies},
    location = {Washington, DC, USA},
    publisher = {USENIX},
    url = {https://www.usenix.org/conference/woot13/workshop-program/presentation/roland},
    year = {2013},
    month = AUG
}

@book{bib:2015-roland-thesis-book,
    title = {{Security Issues in Mobile NFC Devices}},
    author = {Roland, Michael},
    series = {T-Labs Series in Telecommunication Services},
    publisher = {Springer},
    address = {Cham},
    doi = {10.1007/978-3-319-15488-6},
    isbn = {978-3-319-15487-9},
    year = {2015},
    month = JAN
}

@inproceedings{bib:2021-hoeller-foci,
	title = {{On the state of V3 onion services}},
	author = {Höller, Tobias and Roland, Michael and Mayrhofer, René},
	booktitle = {Proceedings of the ACM SIGCOMM 2021 Workshop on Free and Open Communications on the Internet (FOCI '21)},
	location = {Virtual},
	pages = {50--56},
	publisher = {ACM},
	doi = {10.1145/3473604.3474565},
	year = {2021},
	month = AUG
}

@inproceedings{bib:2021-hoeller-iiwas,
	title = {{Analyzing inconsistencies in the Tor consensus}},
	author = {Höller, Tobias and Roland, Michael and Mayrhofer, René},
	booktitle = {The 23rd International Conference on Information Integration and Web Intelligence (iiWAS2021)},
	location = {Linz, Austria},
	numpages = {10},
	publisher = {ACM},
	doi = {10.1145/3487664.3487793},
	year = {2021},
	month = NOV
}