University of Dayton thesis and dissertation (uddissert2023)
The uddissert2023 class that the University of Dayton's School of Engineering provides for theses and dissertations (PhD, MS, MA, DMA options), with its sample: title page with the UD logo, committee approval page, copyright page, abstract, dedication, acknowledgments, lists of figures and tables, two chapters with EPS figures, an IEEE-style BibTeX bibliography and two appendices.
- Category
- Thesis
- Document class
uddissert2023(uddissert2023.cls) — ships with TeX Live- Workflow
- Thesis / dissertation — submissions and revision rounds
- Author
- University of Dayton, School of Engineering (Graduate Academic Affairs)
- Source
- University of Dayton, School of Engineering (Graduate Academic Affairs)
- Licence
- No licence is stated in the files. University of Dayton, School of Engineering (Graduate Academic Affairs) distributes them for authors preparing a submission.
These are the publisher’s own files. This project starts from University of Dayton, School of Engineering (Graduate Academic Affairs)’s package for this publication — their manuscript, their uddissert2023.cls, their bibliography style — so what compiles here is what they would have given you.
University of Dayton, School of Engineering (Graduate Academic Affairs) serves this exact file to University of Dayton. Check University of Dayton, School of Engineering (Graduate Academic Affairs)’s author pages for the current instructions.
Where this differs from the publisher’s download.
- Note: The kit dates from March 2023; check the output against the University of Dayton Graduate School's current formatting requirements.
What you get
Drew_Eric-eps-converted-to.pdf· 166 KBDrew_Eric.eps· 1179 KBUDlogo-eps-converted-to.pdf· 75 KBUDlogo.eps· 259 KBUDlogo_new-eps-converted-to.pdf· 22 KBUDlogo_new.eps· 42 KBabstract.tex· 61 Baccessibility.sty· 65 KBack.tex· 33 Bch1.tex· 4 KBch2.tex· 1 KBreferences.bib· 4 KBuddissert.tex— the file that is compiled · 3 KBuddissert2023-mods.sty· 25 KBuddissert2023.cls· 7 KB
These become your files. Editing them afterwards changes your project and nothing else — a project owns its files from the moment it is made.
Source
Drew_Eric-eps-converted-to.pdf — binary, 166 KB
Drew_Eric.eps — binary, 1179 KB
UDlogo-eps-converted-to.pdf — binary, 75 KB
UDlogo.eps — binary, 259 KB
UDlogo_new-eps-converted-to.pdf — binary, 22 KB
UDlogo_new.eps — binary, 42 KB
abstract.tex · 61 B
% abstract.tex
This is where you should start your abstract.accessibility.sty · 65 KB
65 KB — too long to show here. It arrives with the project.
ack.tex · 33 B
Write your acknowledgements here.ch1.tex · 4 KB
\chapter{INTRODUCTION}
\label{ch1}
Write your introductory chapter here. For example, your literature
overview could go here. Sometimes You will want a section to go within your chapter.
\section{Section 1}
Section 1 goes here.
Here is an example of a table. These are the UD holidays for AY 2017-2018.
\begin{table}
\begin{center}
\caption{University of Dayton Holidays for Academic Year 2017-2018}
\label{tab:class}
\begin{tabular}{||l|c|c|r||}
\hline
Holdiay & Month & Day & Year\\
\hline
\hline
Labor Day & September & 4 & 2017 \\
\hline
Mid-Terms Break & October & 5-6 & 2017 \\
\hline
Thanksgiving & November & 22-24 & 2017 \\
\hline
Christmas Break & December & 17 & 2017 \\
\hline
Christmas Break Ends & January & 16 & 2018 \\
\hline
Spring Break & February & 28 & 2018 \\
\hline
Spring Break Ends & March & 5 & 2018 \\
\hline
Easter Recess & March & 28 & 2018 \\
\hline
Easter Recess Ends & April & 3 & 2018 \\
\hline
Stander Symposium & April & 18 & 2018 \\
\hline
\multicolumn{4}{} \\
\end{tabular}
\end{center}
\alt{This is a table of University Holidays}
\end{table}
We can reference the University holidays in Table \ref{tab:class}.
Here is a second table showing the UD Men's 2018-2019 basketball schedule
\section{Section 2}
\begin{table}
\begin{center}
\caption{University of Dayton Men's Basketball Schedule 2018-2019}
\label{tab:bball}
\begin{tabular}{||l|c||}
\hline
Date & Opponent \\
\hline \hline
November 2 & Capital \\
\hline
November 7 & North Florida \\
\hline
November 10 & Coppin State \\
\hline
November 16 & Purdue Fort Wayne \\
\hline
November 21 & Butler \\
\hline
November 22 & Virginia \\
\hline
November 23 & Oklahoma \\
\hline \hline
December 4 & Detroit Mercy \\
\hline
December 8 & Auburn \\
\hline
December 16 & Tulsa \\
\hline
December 19 & Western Michigan \\
\hline
December 22 & Presbyterian \\
\hline
December 29 & Georgia Southern \\
\hline \hline
January 6 & Richmond \\
\hline
January 9 & George Washington \\
\hline
January 13 & Massachusetts \\
\hline
January 16 & VCU \\
\hline
January 19 & St. Bonaventure \\
\hline
January 23 & George Mason \\
\hline
January 26 & Fordham \\
\hline
January 29 & Saint Joseph's \\
\hline \hline
February 2 & Duquesne \\
\hline
February 5 & Saint Louis \\
\hline
February 9 & Rhode Island \\
\hline
February 16 & VCU \\
\hline
February 19 & Davidson \\
\hline
February 23 & Saint Louis \\
\hline
February 26 & Massachusetts \\
\hline \hline
March 1 & Rhode Island \\
\hline
March 6 & La Salle \\
\hline
March 9 & Douquesne \\
\hline
\multicolumn{2}{} \\
\end{tabular}
\end{center}
\alt{This is the 2017-2018 UD Men's Basketball schedule}
\end{table}
Again, we can reference basketball schedule as Table \ref{tab:bball}.
Section 2 goes here.
An example of an equation is
\begin{equation}
x[n] = \left\{ \begin{array}{ll}
\infty, & {\tt t=0} \\
0, & {\tt else}
\end{array}\right..
\label{eqn:delta}
\end{equation}
Now, we can reference this equation as Equation \ref{eqn:delta}.
Here is an example of a citation. In \cite{JMRK2002}, the authors discuss adaptive control using on-line
function approximation.
ch2.tex · 1 KB
\chapter{EXTREMELY LONG CHAPTER TITLE TO MAKE SURE THAT IT GOES ACROSS MULTIPLE LINES.}
\label{ch2}
Write your second chapter here -- for example, a problem
statement. Notice that you can refer to other chapters like this: in
Chapter \ref{ch1} the reader will find a literature overview.
Again, we might want to break this chapter up into sections.
\section{Section 1}
Section 1 goes here.
\section{Section 2}
Section 2 goes here.
An example of a figure is here:
Once I have a picture, then I use a software program called GIMP (GNU image manipulator program) to convert my picture into a .eps file (embedded post script). The rest is easy...
\begin{figure}[ht]
\centerline{\epsfysize 7cm \epsffile{Drew_Eric.eps}}
\caption{Dr. Murray throwing Eric off of the
Great Wall of China.}
\alt{Detailed description of Dr. Murray throwing
Eric off the Great Wall of China.}
\label{fig:Drew_Eric}
\end{figure}
We can reference this figure as Figure \ref{fig:Drew_Eric}.
For a second figure, let's use the UD logo.
\begin{figure}[ht]
\centerline{\epsfysize 7cm \epsffile{UDlogo.eps}}
\caption{University of Dayton Logo}
\alt{Detailed description of University of Dayton Logo}
\label{fig:UD_logo}
\end{figure}
Again, we can reference this figure as Figure \ref{fig:UD_logo}. references.bib · 4 KB
% Bibliography data base for research papers.
% Your Name
% Dayton, OH, April 2020
% University of Dayton
%*************************************************************
% These are used to simplify entries. Change or add as needed
%*************************************************************
@String{AP = {Academic Press}} @String{AP:add = {New York}}
@String{CRC = {CRC Press}} @String{CRC:add = {Boca Raton}}
@String{CAM = {Cambridge University Press}} @String{CAM:add =
{Cambridge (Cambridgeshire); New York}} @String{ESP = {Elsevier
Science Publishers}} @String{ESP:add = {Amsterdam, London, New
York}} @String{JW = {John Wiley and Sons}} @String{JW:add = {New
York, NY}} @String{MAC = {Macmillan College Publishing Company}}
@String{MAC:add = {New York, NY}} @String{MGH = {McGraw-Hill}}
@String{MGH:add = {New York}} @String{MK = {Morgan Kaufmann}}
@String{MK:add = {San Mateo, CA}} @String{SV = {Springer-Verlag}}
@String{SV:add = {Berlin, Heidelberg, New York}} @String{PH =
{Prentice Hall}} @String{PH:add = {Englewood Cliffs, New Jersey}}
@String{SAU = {Saunders College Publishing}} @String{SAU:add =
{Orlando, Florida}}
@String{A = {Automatica}} @String{IJC = {International Journal of
Control}} @String{JDSMC = {ASME J. Dyn. Syst., Meas., Contr.}}
@String{IEED = {IEE Proc. D, Control Theory {\&} Appl.}}
@String{SCL = {Systems {\&} Control Letters}} @String{IJCS = {Int.
J. Adapt. Control Signal Process.}} @String{IJSC = {International
Journal of Systems Science}} @String{FSS = {Fuzzy Sets and
Systems}} @String{AJA = {AIAA Journal of Aircraft}}
@String{TAC = {IEEE Transactions on Automatic Control}}
@String{TVT = {IEEE Transactions on Vehicular Technology}}
@String{TRA = {IEEE Transactions on Robotics and Automation}}
@String{TFS = {IEEE Transactions on Fuzzy Systems}} @String{TNN =
{IEEE Transactions on Neural Networks}} @String{TSMC = {IEEE
Transactions on Systems, Man, and Cybernetics}} @String{CSM =
{IEEE Control Systems Magazine}} @String{TCST = {IEEE Transactions
on Control Systems Technology}} @String{TCS = {IEEE Transactions
on Circuits and Systems}}
% IT'S IS A GOOD IDEA TO ORGANIZE YOUR REFERENCES BY MAJOR TOPIC.
% BELOW ARE A FEW JUST TO GET YOU STARTED.
%*************************************************************
% Optimization
%*************************************************************
@Book{POP1981,
author = "P. Gill and W. Murray and M. Wright",
title = "Practical Optimization",
publisher = AP,
year = 1981,
address = AP:add
}
@article{TamaraDS2003,
author = "Tamara G. Kolda and Robert Michael Lewis and Virginia Torczon",
title = "Optimization by direct search: new perspectives on some classical and modern methods",
journal = "SIAM Review",
number = "3",
volume = "45",
year = 2003,
pages = "385-482"
}
%*************************************************************
% Numerical Analysis
%*************************************************************
author = "C. Brezinski and L. Wuytack",
title = "Numerical Analysis: Historical Developments in the 20th century.",
publisher = "North-Holland",
year = 2001}
@article{JTA2000,
author = "J. J. Dongarra and F. Sullivan",
title = "Top ten algorithms",
journal = "IEEE/AIP Computer Science Technology",
year = 2000,
month = "Jan.-Feb"
}
%*************************************************************
% Control
%*************************************************************
@book{JMRK2002,
author = "Jeffrey T. Spooner and Manfredi Maggiore and {Ra\'ul}
{{Ord\'o\~nez}} and Kevin M. Passino",
title = "Stable Adaptive Control and Estimation for Nonlinear Systems,
Neural and Fuzzy Approximator Techniques.",
publisher = JW,
year = 2002,
address = JW:add}
@book{GSN2001,
author = "Graham C. Goodwin and Stefan F. Graebe and Mario E. Salgado",
title = "Control System Design",
publisher = PH,
year = 2001,
address = PH:add}
@book{CTChen1999,
author = "Chi-Tsong Chen",
title = "Linear System Theory and Design",
publisher = "Oxford University Press",
year = 1999,
address = "New York Oxford"}
@Manual{qunser2002,
title = {Control Tool Box Manual},
author = {Quanser},
organization = {Quanser},
year = 2002
}
@Misc{yqc2004,
author = "Yangquan Chen",
title = "Digital Differentiator Webpage",
note = "http://www.csois.usu.edu/people/yqchen/dd/index.html"
}
@MastersThesis{VRA2003,
author = {Vikram R. Arjuva},
title = {Nonlinear Control Systems Laboratory},
school = {University of Dayton},
year = 2003
}
uddissert.tex — the file that is compiled · 3 KB
\newif\ifuseudlogo
% comment the following line if you don't want the UD logo in the title page
\useudlogotrue
\documentclass[11pt,phd]{uddissert2023}
%\documentclass[11pt,phdfv]{uddissert2023} % use if you have 5 committee members
%\documentclass[11pt,ms]{uddissert2023} % for MS theses
\usepackage[tagged, highstructure]{accessibility} % use for accessibility
% remember to put title in all capital letters
\newcommand{\acctitle}{EXTREMELY VERY LONG DISSERTATION TITLE SO IT WILL SPAN MULTIPLE LINES. HOPEFULLY NOW IT IS LONG ENOUGH}
% add language, title for accessibility
\usepackage[hidelinks, pdflang={en-US}, pdftitle=\acctitle]{hyperref}
\usepackage{uddissert2023-mods}
\usepackage{graphicx}
\usepackage{appendix}
\usepackage{subfig}
\usepackage{epsfig}
\begin{document}
\pagestyle{intropage}
\authorLastFirstMiddle{Doe}{John J.}
\firsttitle{\acctitle}
\graduationyear{2023}%
\graduationmonth{May}%
\school{The School of Engineering}%
\dept{Engineering}
\advisor{Balster}{Eric J.}{Ph.D.}{Advisory Committee Chairman}{Professor and Chair}{Electrical and Computer Engineering}
\Membera{Name}{Member A.}{Ph.D.}{Committee Member}{Faculty A. Title}{Faculty A department}%
\Memberb{Name}{Member B.}{Ph.D.}{Committee Member}{Faculty B. Title}{Faculty B department}%
\Memberc{Name}{Member C.}{Ph.D.}{Committee Member}{Faculty C. Title}{Faculty C department}%
%\Memberd{Name}{Member D.}{Ph.D.}{Committee Member}{Faculty D. Title}{Faculty D department}%
\AssocDean{Robert J. Wilkens, Ph.D., P.E.}{Associate Dean for Research and Innovation Professor}{School of Engineering}%
\Dean{Gül E. Kremer, Ph.D.}{Dean, School of Engineering}%
\makethesistitle
% use to include a copyright page
\disscopyright
\abstract
\input{abstract.tex}
\dedication{For name of person(s) to whom you are dedicating your thesis}
\acknowledgments
\input{ack.tex}
\tableofcontents
\listoffigures
\listoftables
%\Listofvariables
% Below is a list of Greek variables often used in Theses and Dissertations.
% \begin{itemize}
% \item $\alpha$ - alpha
% \item $\beta$ - beta
% \item $\omega$ - omega
% \end{itemize}
%\Listofacronyms
% Below is a list of acronyms commonly used around UD.
%\begin{itemize}
% \item UD - University of Dayton
% \item SoE - School of Engineering
% \item ECE - Electrical and Computer Engineering
%\end{itemize}
\pagestyle{plain}
%Remember to put all chapter titles in CAPS
\addtocontents{toc}{\protect\setChapterprefix{CHAPTER }} % CDM Establish CHAPTER label in table of contents
% use as many input statements as you have chapters
% note that \input{} doesn't work unless you have a file named the same as the text inside the {} in the same directory as this main file.
%\input{file name for last chapter}
\input{ch1.tex}
\input{ch2.tex}
\bibliographystyle{IEEEtran}
\bibliography{references}
\appendix
\begin{appendices}
\appendix
\addtocontents{toc}{\protect\setChapterprefix{}} % CDM Remove labels in table of contents for Appendix sections
\chapter{More Stuff at the End}
This is Appendix A. Appendix A should span multiple lines so I can see if the margins are correct. We need to ensure that we have 1.5 inches on the LHS margin.
\chapter{Even More Stuff after the End}
This is Appendix B. Appendix B should span multiple lines so I can see if the margins are correct. We need to ensure that we have 1.5 inches on the LHS margin.
\end{appendices}
\end{document}
uddissert2023-mods.sty · 25 KB
% 2023 Style file for MS Theses and PhD Dissertations
% maintained by Eric J. Balster
\typeout{Version \rcsStrip$Revision: 2.0 $ of \rcsStripFile
$RCSfile: uddissert2023-mods.sty,v $ (\rcsStripDate$Date: 2023/03/09
14:18:41 $)}
\newlength\singlespacelength
\newlength\doublespacelength
\newlength\triplespacelength
\setlength\singlespacelength{15\p@}
\setlength\doublespacelength{26\p@}
\setlength\triplespacelength{40\p@}
\newcommand\startsinglespace{\setlength\baselineskip{\singlespacelength}}
\newcommand\startdoublespace{\setlength\baselineskip{\doublespacelength}}
\usepackage[top=1.01in, bottom=1.15in, left=1.5in, right=1in]{geometry}
\usepackage{chngpage}
\usepackage{xstring}
% Incentivize Tex to avoid orphan lines (CDM 03/22/2018) per L. Wallace
\widowpenalty10000
\clubpenalty10000
\def\ps@plain{% pages after chapter page (to reset settings from chapter page)
\if@uddraft
\def\@oddhead{\reset@font\sffamily\drafttext\hfil\reset@font%
\rmfamily\thepage\hfil\reset@font\sffamily\today}
\else
\def\@oddhead{}
\def\@oddfoot{\hfil\thepage\hfil}
\let\@evenfoot\@oddfoot
\def\@evenhead{}
\fi
\let\@mkboth\markboth
\def\chaptermark##1{%
\markright {\uppercase{\ifnum \c@secnumdepth >\m@ne
\@chapapp\ \thechapter. \ \fi
##1}}
}
}
% the first page for chapters
\def\ps@chappage{
\def\@oddhead{}
\def\@oddfoot{\hfil \rm \thepage \hfil}
\def\@evenhead{}
\let\@evenfoot\@oddfoot
}
% the introduction pages
\def\ps@intropage{
\def\@oddhead{}
\def\@oddfoot{\hfil \rm \thepage \hfil}
\def\@evenhead{}
\let\@evenfoot\@oddfoot
}
\def\ps@return{
}
\if@compatibility
\let\my@document\document
\def\document{
\my@document
\startdoublespace
}
\else
\AtBeginDocument{
\startdoublespace
% change paragraph skip EJB 3/27/2018
%\setlength{\parskip}{15\p@}
\setlength{\parskip}{12\p@}
}
\fi
% ****************************************
% * CHAPTERS AND SECTIONS *
% ****************************************
\def\boldcmd{\bfseries}
% Remove Bold from Abstract and Title (EJB 1/25/2018) per L. Wallace
%\def\typesetHeading#1{{\normalfont\large\boldcmd{#1}}}
\def\typesetHeading#1{{\normalfont\large{#1}}}
\def\typesetColumnHeading#1{{\boldcmd #1}}
\def\typesetChapterTitle#1{{#1}}
\newcommand\dedicationname{DEDICATION}
\newcommand\vitaname{VITA}
\newcommand\vitanameLC{Vita}
\newcommand\publicationsname{PUBLICATIONS}
\newcommand\awardsname{AWARDS}
% added for awards section on "Vita"
\newcommand\fieldsname{FIELDS OF STUDY}
\renewcommand\abstractname{ABSTRACT}
\newcommand\abstractnameLC{Abstract}
\renewcommand\listfigurename{LIST OF FIGURES}
\newcommand\listfigurenameLC{List of Figures}
\renewcommand\listtablename{LIST OF TABLES}
\newcommand\listtablenameLC{List of Tables}
\newcommand\listsymbolname{LIST OF SYMBOLS}
\newcommand\listsymbolnameLC{List of Symbols}
\renewcommand\partname{VOLUME}
\renewcommand\contentsname{TABLE OF CONTENTS}
\newcommand\contentsnameLC{Table of Contents}
\renewcommand\chaptername{CHAPTER}
\newcommand\chapternameLC{Chapter}
\renewcommand\appendixname{APPENDIX}
\newcommand\appendixnameLC{Appendix}
\renewcommand\bibname{BIBLIOGRAPHY}
\newcommand\bibnameLC{Bibliography}
\newcommand\appendicesname{APPENDICES} % Change "Appendices:" to "APPENDICES" (CDM 03/22/2018) per L. Wallace
%\newcommand\pagename{Page}
\newcommand\acknowledgmentname{ACKNOWLEDGMENTS}
\newcommand\acknowledgmentnameLC{Acknowledgments}
\newcommand\Listofvariablesname{LIST OF VARIABLES}
\newcommand\ListofvariablesnameLC{List of Variables}
\newcommand\Listofacronymsname{LIST OF ACRONYMS}
\newcommand\ListofacronymsnameLC{List of Acronyms}
\newif\ifapp
\appfalse
\def\thechapter {\Roman{chapter}}
\def\thesection {\@arabic\c@chapter.\@arabic\c@section}
\def\thefigure {\@arabic\c@chapter.\@arabic\c@figure}
\def\thetable {\@arabic\c@chapter.\@arabic\c@table}
\def\theequation {\@arabic\c@chapter.\@arabic\c@equation}
\def\intro{\clearpage \thispagestyle{intropage}
\global\@topnum\z@ \@afterindenttrue \secdef\@chapter\@schapter }%\pagestyle{return}
\def\chapter{\clearpage \thispagestyle{chappage}
\global\@topnum\z@ \@afterindenttrue \secdef\@chapter\@schapter }%\pagestyle{plain}
\def\@chapter[#1]#2{
%% Chapters are necessary, so checking secnumdepth is immaterial.
\refstepcounter{chapter}%
\ifapp
\ifnum\value{chapter}=1
\addtocontents{toc}{\vskip 1.0em %plus 1pt
\hskip -\parindent \appendicesname\hfill%
\vskip 0.25em
\rm}
\else
{}
\fi
\else
\ifnum\value{chapter}=1
% Moving away from roman numerals - EJB - 6/13/2022
% \pagenumbering{arabic}
\pagestyle{plain}
\addtocontents{toc}{\vskip 0.25em
\rm}
\fi
\fi
\ifnum \c@secnumdepth >\m@ne
\typeout{\@chapapp\space\thechapter.}
\addcontentsline{toc}{chapter}{\protect\numberline{\thechapter.}#1}%
\else
\addcontentsline{toc}{chapter}{#1}
\fi
\chaptermark{#1}%
\@makechapterhead{#2}%
% \pagestyle{reset}
}
% Chapter # is 2in from top, followed by 2 lines, followed by
% the title, 4 lines, and then the text.
\def\@makechapterhead#1{
{
% Change Chapter headings from 2in. to 1in. EJB 1-8-2019
%\vspace*{0.25in}
\vspace*{-0.75in}
\parindent \z@ \raggedright \reset@font
\ifnum \c@secnumdepth >\m@ne%
\center\typesetHeading{\@chapapp{} \thechapter}%
%\par
%\vskip 30pt
\fi
\begin{center}
% Remove Bold from Chapter Headings (EJB 1/25/2018) per L. Wallace
%\large\boldcmd\typesetChapterTitle{#1}
\vskip -20pt
\typesetChapterTitle{#1}
%\par
\end{center}
\nobreak
%\vskip 15\p@ % Too much space between chapter title and body (CDM 3/23/2018) per L. Wallace
}
}
\def\@schapter#1{%
\@makeschapterhead{#1}%
}
% Placement of the Chapter headings
\def\@makeschapterhead#1{
% Change heading in TOC, LOF, LOT, and Aknowledgements from 2in. to 1in. EJB 1-8-2019
%\vspace*{0.5in}
\vspace*{-0.5in}
{
\parindent \z@ \raggedright
\reset@font
\begin{center}
\large\boldcmd\typesetChapterTitle{#1}
\par
\end{center}
\nobreak
% Reduce the spacing between the chapter heading and title (CDM 03/22/2018) per L. Wallace
\vskip 15\p@
}
}
% Remove Bold from Section Headings (EJB 1/25/2018) per L. Wallace
\renewcommand\section{\@startsection {section}{1}{\z@}%
{3.5ex \@plus 1ex \@minus .2ex}%
{0.75ex \@plus.1ex}% % Reduce the spacing after section headers (CDM 3/22/2018) per L. Wallace
%{\reset@font\large\bfseries}}
{\reset@font\large}}
\renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
{3.25ex\@plus 1ex \@minus .2ex}%
{0.75ex \@plus.1ex}%% Reduce the spacing after section headers (CDM 3/22/2018) per L. Wallace
%{\normalfont\large\bfseries}}
{\normalfont\large}}
\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
{3.25ex\@plus 1ex \@minus .2ex}%
{0.75ex \@plus.1ex}%% Reduce the spacing after section headers (CDM 3/22/2018) per L. Wallace
%{\normalfont\normalsize\bfseries}}
{\normalfont\normalsize}}
\renewcommand\appendix{
\par
\setcounter{chapter}{0}%
\setcounter{section}{0}%
\renewcommand\@chapapp{\appendixname}%
\renewcommand\thechapter{\Alph{chapter}}%
\renewcommand\thesection{\Alph{chapter}.\arabic{section}}% Enforce alpha-numeric references in the appendices (CDM 03/22/2018) per L. Wallace
\renewcommand\thefigure{\Alph{chapter}.\arabic{figure}}% Enforce alpha-numeric references in the appendices (CDM 03/22/2018) per L. Wallace
\renewcommand\thetable{\Alph{chapter}.\arabic{table}}% Enforce alpha-numeric references in the appendices (CDM 03/22/2018) per L. Wallace
\renewcommand\theequation{\Alph{chapter}.\arabic{equation}}% Enforce alpha-numeric references in the appendices (CDM 03/22/2018) per L. Wallace
\apptrue
}
% ****************************************
% * FIGURES AND TABLES *
% ****************************************
\renewcommand\thefigure{\@arabic\c@chapter.\@arabic\c@figure}
\renewenvironment{figure}{\@float{figure}}{\end@float}
\renewenvironment{figure*}{\@dblfloat{figure}}{\end@dblfloat}
\renewcommand\thetable {\@arabic\c@chapter.\@arabic\c@table}
\renewenvironment{table}{\@float{table}}{\end@float}
\renewenvironment{table*}{\@dblfloat{table}}{\end@dblfloat}
\setlength\abovecaptionskip{15\p@}
\setlength\belowcaptionskip{10\p@}
\setlength\floatsep {40\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\textfloatsep{40\p@ \@plus 2\p@ \@minus 1\p@}
\setlength\intextsep {30\p@ \@plus 4\p@ \@minus 1\p@}
\setlength\dblfloatsep {20\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
% ****************************************
% * TOC, LOF, LOT *
% ****************************************
\renewcommand\tableofcontents{%
\intro*{\typesetHeading\contentsname
\@mkboth{\uppercase{\contentsname}}{\uppercase{\contentsname}}}%
\startsinglespace
\@starttoc{toc}
\startdoublespace
}
% Include abstract, dedication, acknowledgements, LoF, LoT in ToC
\def\l@front#1#2{
\vskip -5pt
\@dottedtocline{0}{0pt}{2.3em}{#1}{#2}
}
\def\setChapterprefix#1{\gdef\@Prefix{#1}} % CDM Establish chapter prefixes for table of contents
\setChapterprefix{} % CDM Define chapter prefixes for table of contents
% Include the chapters in the TOC
\renewcommand\l@chapter[2]{
\ifnum \c@tocdepth >\m@ne
%\vskip 1.0em \@plus\p@
\begingroup
\parindent \z@ \rightskip \@pnumwidth
{\@dottedtocline{0}{0em}{2.3em}{\@Prefix \space #1}{#2}}\par % CDM Insert chapter prefixes for table of contents
\penalty\@highpenalty
\vskip 10pt
\endgroup
\fi
}
% How sections are printed in ToC
\renewcommand\l@section {
\vskip -15pt
\@dottedtocline{1}{2.5em}{2.3em}
}
% How subsections are printed in ToC
\renewcommand\l@subsection {
\vskip -15pt
\@dottedtocline{2}{4.8em}{3.2em}
}
\renewcommand\listoffigures{
\intro*{\typesetHeading{\listfigurename}}
\addcontentsline{toc}{front}{\listfigurename}
\startsinglespace
\@starttoc{lof}
\startdoublespace
}
% set the left margin of LOF to 1.5in. EJB 4-16-19
%\renewcommand\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
\renewcommand\l@figure{\@dottedtocline{1}{0.0em}{2.3em}}
\renewcommand\listoftables{
\intro*{\typesetHeading{\listtablename}}
\addcontentsline{toc}{front}{\listtablename}%
% % set the left margin of LOT to 1.5in. EJB 4-16-19
% \setlength{\oddsidemargin}{0.25in}
\startsinglespace
\@starttoc{lot}
\startdoublespace
}
% set the left margin of LOF to 1.5in. EJB 4-16-19
\renewcommand\l@table{\@dottedtocline{1}{0.0em}{2.3em}}
% ****************************************
% * BIBLIOGRAPHY AND INDEX *
% ****************************************
\renewenvironment{thebibliography}[1]{
\intro*{\typesetHeading{\bibname}
\@mkboth{\uppercase{\bibname}}{\uppercase{\bibname}}}
\addcontentsline{toc}{front}{{\bibname}}
\startsinglespace
\vspace*{-0.25in}
\list{\@biblabel{\arabic{enumiv}}}
{\settowidth\labelwidth{\@biblabel{#1}}
\leftmargin\labelwidth
\advance\leftmargin\labelsep
\usecounter{enumiv}%
\let\p@enumiv\@empty
\renewcommand\theenumiv{\arabic{enumiv}}}%
\renewcommand\newblock{\hskip .11em \@plus.33em \@minus.07em}%
\sloppy\clubpenalty10000\widowpenalty10000%
\sfcode`\.=\@m}
{\def\@noitemerr
{\@latex@warning{Empty `thebibliography' environment}}%
\endlist
}
% ****************************************
% * TITLE AND ABSTRACT *
% ****************************************
\def\@author{}
\def\@title{}
\gdef\@author{}\gdef\@title{}
\def\authordegrees#1{\def\@authordegrees{#1}}
\def\@authordegrees{}
\newcommand\authorLastFirstMiddle[2]{\def\@authorLast{#1}\def\@authorFirstMiddle{#2}\author{#2 #1}}
\newcommand\advisor[6]{\def\@advisorLast{#1}\def\@advisorFirstMiddle{#2}\def\@advisorDegree{#3}\def\@advisorTitle{#4}\def\@advisorPosition{#5}\def\@advisorDept{#6}}
\newcommand\Membera[6]{\def\@MemberaLast{#1}\def\@MemberaFirstMiddle{#2}\def\@MemberaDegree{#3}\def\@MemberaTitle{#4}\def\@MemberaPosition{#5}\def\@MemberaDept{#6}}
\newcommand\Memberb[6]{\def\@MemberbLast{#1}\def\@MemberbFirstMiddle{#2}\def\@MemberbDegree{#3}\def\@MemberbTitle{#4}\def\@MemberbPosition{#5}\def\@MemberbDept{#6}}
\newcommand\Memberc[6]{\def\@MembercLast{#1}\def\@MembercFirstMiddle{#2}\def\@MembercDegree{#3}\def\@MembercTitle{#4}\def\@MembercPosition{#5}\def\@MembercDept{#6}}
\newcommand\Memberd[6]{\def\@MemberdLast{#1}\def\@MemberdFirstMiddle{#2}\def\@MemberdDegree{#3}\def\@MemberdTitle{#4}\def\@MemberdPosition{#5}\def\@MemberdDept{#6}}
\newcommand\Dean[3]{\def\@deanName{#1}\def\@deanTitle{#2}\def\@deanSchool{#3}}
\newcommand\AssocDean[3]{\def\@assocdeanName{#1}\def\@assocDeanTitle{#2}\def\@assocDeanSchool{#3}}
\def\firsttitle#1{\def\@firsttitle{#1}}
\def\degree#1{\def\@degree{#1}}
\def\@degree{Doctor of Philosophy}
\def\degreeabbrev#1{\def\@degreeabbrev{#1}}
\def\@degreeabbrev{Ph.D.}
\def\committee#1{\def\@committee{#1}}
\def\@committee{Dissertation}
\def\@thesis{Dissertation}
\def\graduationyear#1{\def\@graduationyear{#1}}
\def\@graduationyear{\year}
\def\graduationmonth#1{\def\@graduationmonth{#1}}
\def\@graduationmonth{\month}
\def\linea{\makebox[2.5in][l]{\leaders\hrule\hskip 2.5in}}
%% Temporary page counter while processing abstract.
% 2022 change to remove roman numerals - EJB - 6/13/2022
%\newcounter{disspage}
\newcommand\school[1]{\def\@school{#1}}
\newcommand\dept[1]{\def\@dept{#1}}
% Eric is changing the title page (12/15/17)
\newcommand\makethesistitle{
\newcommand\@maketitle{
\ifuseudlogo
\begin{titlepage}
\startdoublespace
% 2022 change for arabic page numbering EJB 6/13/2022
%\pagenumbering{roman} \thispagestyle{empty}
\pagenumbering{arabic} \thispagestyle{empty}
\begin{center}
% remove vertical space EJB 3/27/2018
% change top margin from 2in. to 1in. EJB 1/8/2019
% increase top margin to 2in. from 1in. EJB 2/18/2019
% change top margin from 2in. to 1in. Per Linda Wallace 10/19/2021
\vspace*{-0.65in} % 1 inch
%\vspace*{0.45in} % 2 inch
% remove large title EJB 3/27/2018
%\Large\startdoublespace{\@firsttitle}
\startdoublespace{\@firsttitle}
% increase vertical space after title EJB 3/27/2018
\vskip 45pt
\normalsize {\@thesis} \par
Submitted to \par
\@school \ of the \par
UNIVERSITY OF DAYTON
\vskip 20pt
In Partial Fulfillment of the Requirements for \par
The Degree of \par
\@degree{} in \@dept
% increase vertical skip after Degree name EJB 3/27/2018
%\vskip 30pt
\vskip 45pt
By \par
\begin{tabular}[t]{c}\@author \@authordegrees
\end{tabular}
% remove vertical skip EJB 3/27/2018
%\vskip 15pt
% add vertical skip back in EJB 10/19/2021
\vskip 100pt
\par
% remove UNIVERSITY OF DAYTON after student name EJB 3/27/2018
% UNIVERSITY OF DAYTON \par
Dayton, Ohio \par
\@graduationmonth, \ \number\@graduationyear \par
% add university logo at bottom of title page EJB 3/27/2018
\begin{figure}[ht]
\centerline{\epsfysize 2.7cm \epsffile{UDlogo_new.eps}}
\end{figure}
\end{center}
\end{titlepage}
\else
\begin{titlepage}
\startdoublespace
% 2022 change for arabic page numbering EJB 6/13/2022
\pagenumbering{roman} \thispagestyle{empty}
\pagenumbering{arabic} \thispagestyle{empty}
\begin{center}
% remove vertical space EJB 3/27/2018
% change top margin from 2in. to 1in. EJB 1/8/2019
% increase top margin to 2in. from 1in. EJB 2/18/2019
% change top margin from 2in. to 1in. Per Linda Wallace 10/19/2021
\vspace*{-0.65in} % 1 in
%\vspace*{0.45in} % 2 in
% remove large title EJB 3/27/2018
%\Large\startdoublespace{\@firsttitle}
\startdoublespace{\@firsttitle}
% increase vertical space after title EJB 3/27/2018
\vskip 70pt
\normalsize {\@thesis} \par
Submitted to \par
\@school \ of the \par
UNIVERSITY OF DAYTON
\vskip 45pt
In Partial Fulfillment of the Requirements for \par
The Degree of \par
\@degree{} in \@dept
% increase vertical skip after Degree name EJB 3/27/2018
% increase vertical skip after Degree name EBJ 2/18/2019
%\vskip 30pt
%\vskip 45pt
\vskip 55pt
By \par
\begin{tabular}[t]{c}\@author \@authordegrees
\end{tabular}
% larger vertical skip due to 1 in top margin EJB 10/19/2021
\vskip 120pt
\par
% remove UNIVERSITY OF DAYTON after student name EJB 3/27/2018
% put UNIVERSITY OF DAYTON back in EJB 2/18/2019
% remove UNIVERSITY OF DAYTON after student name EJB 3/27/2018
%UNIVERSITY OF DAYTON \par
Dayton, Ohio \par
\@graduationmonth, \ \number\@graduationyear \par
\end{center}
\end{titlepage}
\fi
%APPROVAL PAGE
\newpage
% change top margin EJB 3/27/2018
% change top margin from 2in. to 1in. EJB 1/8/2019
%\vspace*{0.25in}
%\vspace*{0.35in}
\vspace*{-0.65in}
\begin{center}
% Add title to thesis/dissertation approval page EJB 6/13/2022
\startdoublespace{\@firsttitle}
\end{center}
\startsinglespace
\begin{flushleft}
Name: \ \@authorLast, \@authorFirstMiddle
%\vskip 15pt
\par
{\large APPROVED BY:}
\end{flushleft}
\startsinglespace
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@advisorFirstMiddle\ \@advisorLast,\ \@advisorDegree \\
\@advisorTitle \\
\@advisorPosition,\ \@advisorDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\hskip 0.5in
\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MemberaFirstMiddle\ \@MemberaLast,\ \@MemberaDegree \\
\@MemberaTitle \\
\@MemberaPosition,\ \@MemberaDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\if@ms
\vskip 45pt
\noindent\hskip 1.75in
\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MemberbFirstMiddle\ \@MemberbLast, \@MemberbDegree \\
\@MemberbTitle \\
\@MemberbPosition,\ \@MemberbDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\vskip 45pt
\fi
\if@phd
\vskip 45pt
\noindent\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MemberbFirstMiddle\ \@MemberbLast, \@MemberbDegree \\
\@MemberbTitle \\
\@MemberbPosition,\ \@MemberbDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\hskip 0.5in
\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MembercFirstMiddle\ \@MembercLast, \@MembercDegree \\
\@MembercTitle \\
\@MembercPosition,\ \@MembercDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\vskip 45pt
\fi
\if@phdfv
\vskip 15pt
\noindent\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MemberbFirstMiddle\ \@MemberbLast, \@MemberbDegree \\
\@MemberbTitle \\
\@MemberbPosition,\ \@MemberbDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\hskip 0.5in
\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MembercFirstMiddle\ \@MembercLast, \@MembercDegree \\
\@MembercTitle \\
\@MembercPosition,\ \@MembercDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\vskip 15pt
\noindent\hskip 1.75in
\begin{minipage}[t]{2.5in}
\begin{flushleft}
\vskip 15pt
\rule{\textwidth}{0.5pt}
\@MemberdFirstMiddle\ \@MemberdLast, \@MemberdDegree \\
\@MemberdTitle \\
\@MemberdPosition,\ \@MemberdDept
\vskip 0.25 em
\end{flushleft}
\end{minipage}
\vskip 15pt
\fi
% remove signatures of Dean and Assoc. Dean EJB 7/11/2023
% % move horizontal spacing to fit Bob's big name EJB 3/27/2018
% %\noindent\begin{minipage}[t]{2.5in}
% \noindent\begin{minipage}[t]{3.0in}
% \begin{flushleft}
% \vskip 15pt
% \rule{2.5in}{0.5pt}
% \@assocdeanName, \@assocDeanTitle \\
% \@assocDeanSchool
% \vskip 0.25 em
% \end{flushleft}
% \end{minipage}
% % remove horizontal skip to fit Eddy's name EJB 3/27/2018
% %\hskip 0.5in
% \begin{minipage}[t]{2.5in}
% \begin{flushleft}
% \vskip 15pt
% \rule{\textwidth}{0.5pt}
% \@deanName, \@deanTitle \\
% \@deanSchool
% \vskip 0.25 em
% \end{flushleft}
% \end{minipage}
% % Start Approval Page as page 1 - EJB - 6/13/2022
% %\setcounter{page}{2}
% \setcounter{page}{1}
% \setcounter{footnote}{0} \let\thanks\relax
}
\@maketitle
\gdef\@thanks{}
\startdoublespace
\let\maketitle\relax
}
\renewenvironment{abstract}{
\intro*{\typesetHeading{\abstractname}}
\addcontentsline{toc}{front}{\abstractname}
\begin{center}
\vskip -30 pt
\startdoublespace{\@firsttitle}
\vskip 15 pt
%\vskip -30pt
% decrease spacing after abstract heading (CDM 3/22/2018) per L. Wallace
\noindent \@title
\end{center}
\begin{flushleft}
\startsinglespace
% increase spacing after abstract title (EJB 1/25/2018) per L. Wallace
%\vskip -10pt
\vskip 10pt
\noindent Name: \@authorLast,\ \@authorFirstMiddle \\
\noindent University of Dayton \\
\vskip 10pt
\noindent Advisor: Dr. \@advisorFirstMiddle\ \@advisorLast \\
\end{flushleft}
\vskip -20pt
\par
}
\newcommand\disscopyright{
\if@openright
\cleardoublepage
% 2022 change for arabic page numbering EJB 6/13/2022
%\addtocounter{page}{-2}
\else
\clearpage
% 2022 change for arabic page numbering EJB 6/13/2022
%\addtocounter{page}{-1}
\fi
% Add page number to copyright page - EJB - 6/13/2022
%\thispagestyle{empty}
% change vertical space for copyright page EJB 3/27/2018
%\vspace*{5.3in}
\vspace*{4.1in}
\begin{center}
\copyright \ Copyright by\\
\@author \\
All rights reserved\\
{\number\@graduationyear}
\end{center}
\vspace*{\fill}
}
\newcommand\dedication[1]{
\if@openright\cleardoublepage\else\clearpage\fi
\addcontentsline{toc}{front}{\dedicationname}
\vspace*{\fill}
\begin{center} #1 \end{center}
\vspace*{\fill}
}
% added list of variables per request of L. Wallace (4/13/2021)
\newenvironment{Listofvariables}{
\intro*{\typesetHeading{\Listofvariablesname}}
\addcontentsline{toc}{front}{\Listofvariablesname}
\startdoublespace
\vskip -30pt
}
% added list of acronyms per request of L. Wallce (4/13/2021)
\newenvironment{Listofacronyms}{
\intro*{\typesetHeading{\Listofacronymsname}}
\addcontentsline{toc}{front}{\Listofacronymsname}
\startdoublespace
\vskip -30pt
}
\newenvironment{acknowledgments}{
\intro*{\typesetHeading{\acknowledgmentname}}
\addcontentsline{toc}{front}{\acknowledgmentname}
\startdoublespace
\vskip -30pt
}
\newenvironment{vita}{
\intro*{\vspace*{1in}\typesetHeading\vitaname
\@mkboth{\uppercase{\vitaname}}{\uppercase{\vitaname}}
}
\addcontentsline{toc}{front}{{\vitaname}}
\vskip 10pt
\startsinglespace
}
{\par\startdoublespace}
\def\dateitem#1#2{\noindent #1 \dotfill \parbox[t]{4in}{#2}\par~\par}
\newenvironment{publist}%
{\vspace*{15pt}\begin{center}{\typesetHeading{\publicationsname}}%
\end{center}\vspace*{10pt}}
{\vspace{\singlespacelength}}
\def\researchpubs{\noindent {\bf Research Publications}\par~~\par}
\def\instructpubs{\noindent {\bf Instructional Publications}\par~~\par}
\def\refjourn{\noindent{\bf Referred Journal Articles}\par~~\par}
\def\confproc{\noindent{\bf Conference Proceedings}\par~~\par}
\def\confpres{\noindent{\bf Conference Presentations}\par~~\par}
\def\pubitem#1{\noindent #1 \par~~\par}
\newenvironment{fieldsstudy}%
{\begin{center}{\typesetHeading\fieldsname}\end{center}%
\vspace*{15pt}}
{}
\def\majorfield#1{\noindent Major Field: #1\par~\par}
\newcommand\thesis{
\def\@thesis{Thesis}
\def\@committee{Master's Examination}
\typeout{ }
\typeout{Setting up for Thesis (\@degreeabbrev) rather than Dissertation.}
\typeout{ }
}
\endinput
%%
%% End of file `dissert-mod.sty'.
uddissert2023.cls · 7 KB
%
% $Id: uddissert96.cls,v 1.3 2006/10/04 00:45:41 hanes Exp $
%
% Modified: 1996/08/01 mdh to conform to 1995/1996 GS Format
% Renamed: 1996/10/11 mdh to allow for backwards compatibility.
% Renamed and modified to comply with UD standards: 2004/3/26, Angel Gonzalez
% Modified to solve a few problems 2006 March 6, Carrie Bartsch
% Modified to better conform to UD's format 2006 October 4, Carrie Bartsch
% Original Author: Manas Mandal
%% This is the LaTeX2e document class for UD dissertations according
%% to the 2002 Graduate School specifications
%%
%% This class is based on the standard LaTeX class `report'.
\def\rcsStripFile$#1: #2,v ${#2}
\def\rcsStripDate$#1: #2 #3 ${#2}
\def\rcsStrip$#1: #2 ${#2}
\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{uddissert2023}[\rcsStripDate$Date: 2023/03/09
16:54:00 $ 2023 UD Thesis/Dissertation Class] \typeout{***
Conforms to the 2023 Graduate School Format ***} \typeout{Version
\rcsStrip$Revision: 2.1 $ of \rcsStripFile $RCSfile:
uddissert2023.cls,v $ (\rcsStripDate$Date: 2023/03/09 16:54:00 $)}
%% Dissertation style options (other than `report' options) are
% phd (default) | dma | masters | ms | ma
% uddraft (default is off)
\newif\if@phd\@phdtrue
\newif\if@phdfv\@phdfvfalse
\newif\if@dma\@dmafalse
\newif\if@masters\@mastersfalse
\newif\if@ms\@msfalse
\newif\if@ma\@mafalse
\newif\if@uddraft\@uddraftfalse
\DeclareOption{phd}{\@phdtrue}
\DeclareOption{phdfv}{\@phdfvtrue\@phdfalse}
\DeclareOption{dma}{\@dmatrue\@phdfalse}
\DeclareOption{masters}{\@masterstrue\@phdfalse}
\DeclareOption{ms}{\@mstrue\@phdfalse}
\DeclareOption{ma}{\@matrue\@phdfalse}
\DeclareOption{uddraft}{\@uddrafttrue}
\ExecuteOptions{phd}
%% Only allowed `report' options from the full list (see page 177 of
%% LaTeX book) are shown below. Some options are disallowed because
%% they don't make sense in an OSU dissertation. Options marked
%% ``heck, why not?'' mean OSU Grad School's ``Ugly Brown Book''
%% doesn't care as far as we know, so let's allow the user some
%% creativity. If a default option is the only alternative, specifying
%% it will make no difference.
% 12pt (default)
% letterpaper (default)
% final (default) | draft
% oneside (default) | twoside (can be used for the TR form)
% openany (default) | openright
% onecolumn (default; twocolumn not allowed by Grad School. MM. 1994/08/12)
% titlepage (default)
% openbib (heck, why not?) mdh - there's a good reason. 1996/04/28
% leqno (heck, why not?)
% fleqn (heck, why not?)
%% Switch off remaining `report' options that won't be allowed.
\DeclareOption{10pt}{\OptionNotUsed}
%\DeclareOption{11pt}{\OptionNotUsed}
%\DeclareOption{12pt}{\OptionNotUsed} % default
%\DeclareOption{letterpaper}{\OptionNotUsed} % default
\DeclareOption{legalpaper}{\OptionNotUsed}
\DeclareOption{executivepaper}{\OptionNotUsed}
\DeclareOption{a4paper}{\OptionNotUsed}
\DeclareOption{a5paper}{\OptionNotUsed}
\DeclareOption{b5paper}{\OptionNotUsed}
\DeclareOption{landscape}{\OptionNotUsed}
%\DeclareOption{final}{\OptionNotUsed}
%\DeclareOption{draft}{\OptionNotUsed}
%\DeclareOption{oneside}{\OptionNotUsed}
%\DeclareOption{twoside}{\OptionNotUsed}
%\DeclareOption{openright}{\OptionNotUsed}
%\DeclareOption{openany}{\OptionNotUsed}
%\DeclareOption{onecolumn}{\OptionNotUsed}
\DeclareOption{twocolumn}{\OptionNotUsed}
%\DeclareOption{titlepage}{\OptionNotUsed} % default
\DeclareOption{notitlepage}{\OptionNotUsed}
\DeclareOption{openbib}{\OptionNotUsed}
%\DeclareOption{leqno}{\OptionNotUsed}
%\DeclareOption{fleqn}{\OptionNotUsed}
%% The default action for any option is to pass it to the report class.
\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
%% Execute the options.
\ProcessOptions
%% Load the report class in letterpaper, titlepage (although we
%% shall redefine maketitle later), onecolumn
\LoadClass[letterpaper,titlepage,onecolumn]{report}
%\RequirePackage{newdissert}
%% MM. 1994/07/26.
% Requiring/using newdissert as a package causes some problems because
% the following latex209 variables
% \footheight, \@maxsep, \@dblmaxsep
% are not available in LaTeX2e. (I carefully read classes.dtx and
% clsguide.tex, and concluded that those 3 variables won't matter.)
% Also, it is a mistake to redefine \newcounter for
% part, chapter, section, subsection, subsubsection, paragraph
% figure, table
\RequirePackage{uddissert2023-mods}
%% MM. 1994/07/26.
% Blindly including all the newdissert style files into newdissert-mod,
% and commenting the above definitions makes it work almost as good
% as 2e in 209 compatible mode with the newdissert style.
%% MM. 1994/07/31.
% Fixed newdissert-mod. Result is exactly the same as what newdissert.sty
% produces using latex209, and that is the document that meets grad
% school rules. Fixing newdissert-mod, however, caused it to be
% unusable from 209. Ultimately, osudissert.cls should become a single
% file to be used with 2e, unless others have other ideas .....
% \documentclass[12pt,letterpage,titlepage]{report} followed by
% \usepackage{newdissert-mod} does the same thing as
% \documentclass{osudissert} which I prefer.
%% MM. 1994/08/09
% Many changes to newdissert-mod. Result is exactly the same as what
% newdissert.sty produced. Most commands are now ``renew''ed versions
% of report.cls commands.
%% MM. 1994/08/12.
% Added compatibility check to newdissert-mod so that, in compat mode,
% \documentstyle[12pt,newdissert-mod]{report} works well enough.
%% MM. 1994/08/13.
% Added all these cool initializations for degree options. Since I can't
% force exactly one option to be passed, I make phd option most important
%% MM. 1994/08/17. Cleaned up newdissert-mod. Used (re)newenvironment
%% whenever possible. Used chapter* wherever appropriate. Did leave
%% a few defs in there, esp. Al's stuff and a few variables. Oh yes,
%% fixed a few bugs that came in because I redid all the definitions.
%% MM. 1994/08/22. Changed some stuff in ms abstract.
%% Also added osudraft option.
%% MM. 1994/08/23. Changed float/text spacing yet again.
%% MM. 1995/02/11. Made Index single-space.
%% MM. 1995/02/18. Added co-advisor support to newdissert-mod.
%% MM. 1995/02/23. Fixed osudraft.
%% MM. 1995/03/08. Changed quotations to single-space. Fixed widows in toc.
% Defaults of newdissert-mod again, just for the heck of it.
\def\@degree{Doctor of Philosophy}
\def\@committee{Dissertation}
\def\@thesis{Dissertation}
\def\@degreeabbrev{Ph.D.}
% masters defaults to M.S.
\if@masters
\def\@degree{Master of Science}
\def\@degreeabbrev{M.S.}
\fi
\if@ms
\def\@degree{Master of Science}
\def\@degreeabbrev{M.S.}
\@masterstrue
\fi
\if@ma
\def\@degree{Master of Arts}
\def\@degreeabbrev{M.A.}
\@masterstrue
\fi
% Since I don't know how to allow only one option, I do phd first.
\if@phd
\def\@degree{Doctor of Philosophy}
\def\@degreeabbrev{Ph.D.}
\def\@committee{Dissertation}
\def\@thesis{Dissertation}
\fi
\if@phdfv
\def\@degree{Doctor of Philosophy}
\def\@degreeabbrev{Ph.D.}
\def\@committee{Dissertation}
\def\@thesis{Dissertation}
\fi
\if@dma
\def\@degree{Doctor of Musical Arts}
\def\@degreeabbrev{D.M.A.}
\def\@committee{D.M.A.}
\def\@thesis{D.M.A. DOCUMENT}
\fi
\if@masters
\def\@thesis{Thesis}
\def\@committee{Master's Examination}
\thesis
\fi
\endinput
%%
%% End of file `uddissert2023.cls'.
The first page, as this template compiles today. Click it to enlarge, and again to shrink. Open the file ↗