IIT Bhubaneswar PhD thesis (official template)
IIT Bhubaneswar's own LaTeX thesis template on the report class: title page with the institute logo, approval of the viva-voce board, certificate, declaration, acknowledgments, abstract, contents, lists of figures, tables, abbreviations and symbols, two sample chapters with TikZ figures and an EPS figure, an appendix, a publications list and IEEEtran references.
Create an account to use this
- Category
- Thesis
- Document class
report(report.cls) — ships with TeX Live- Workflow
- Thesis / dissertation — submissions and revision rounds
- Author
- Indian Institute of Technology Bhubaneswar
- Source
- Indian Institute of Technology Bhubaneswar
- Licence
- report.cls: LaTeX Project Public License (installed with TeX). The sample text is Indian Institute of Technology Bhubaneswar's, provided for authors preparing a submission.
These are the publisher’s own files. This project starts from Indian Institute of Technology Bhubaneswar’s package for this publication — their manuscript, their report.cls, their bibliography style — so what compiles here is what they would have given you.
Indian Institute of Technology Bhubaneswar serves this exact file to Indian Institute of Technology Bhubaneswar. Check Indian Institute of Technology Bhubaneswar’s author pages for the current instructions.
Where this differs from the publisher’s download.
- Note: The template dates from 2018-2019 (sample date September 2018). Check it against the current IIT Bhubaneswar PhD regulations before submission.
What you get
Abstract/abstract.tex· 45 BAppendices/appendix0.tex· 649 BChapter_1/chapter_1.tex· 4 KBChapter_2/chapter_2.tex· 2 KBFigure-eps-converted-to.pdf· 26 KBFigure.eps· 580 KBIEEEabrv.bib· 17 KBIEEEfull.bib· 20 KBIITBBS_PhD_Thesis_Main_File.tex— the file that is compiled · 14 KBPublications/PublDDixit.tex· 291 Bbibliography.bib· 5 KBcover_page.tex· 1 KBeepic.sty· 17 KBepic.sty· 25 KBfrontmatter.tex· 4 KBglossary_2.tex· 697 Bhere.sty· 8 KBiitbbs.png· 129 KBjacket.tex· 1 KBnotoccite.sty· 2 KBpsfig.sty· 28 KBsubeqn.sty· 2 KBsymbols.tex· 5 KB
These become your files. Editing them afterwards changes your project and nothing else — a project owns its files from the moment it is made.
Source
Abstract/abstract.tex · 45 B
Write Abstract Here
\newpage
%\null\newpageAppendices/appendix0.tex · 649 B
%%%%% Creating Appendix A
\chapter{}
\label{appendix0}
\graphicspath{{Appendices/Vector/}{Appendices/}}
%%% Lauricella's Hypergeometric Functions
%%%%%
\section*{Title of Appendix}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%% Complete System Diagram
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx.
\begin{align}
y=\alpha\,x+n
\end{align} Chapter_1/chapter_1.tex · 4 KB
\chapter{Title of Chapter 1}
\graphicspath{{Chapter_1/Vector/}{Chapter_1/}}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%
%%%%%% Chapter 1 Section 1
%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%
\section{Title of Section}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ErdelyiBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ErdelyiBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ JakesBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ ExtonBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
\subsection{Title of Subsection}
xxxxxx xxxxxx xxxxxx xxxxxx \cite{ SrivastavaBook}xxxxxx xxxxxx xxxxxx xxxxxx \cite{ PrudnikovBookv4}xxxxxx xxxxxx xxxxxx xxxxxx \cite{ LeeBook1998} xxxxxx xxxxxx xxxxxx xxxxxx \cite{ RyzhikBook}xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ HoytApr1947} xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
%%%%%%%%% Three-Node Cooperative System
\begin{figure*}
\centering
\includegraphics[width=10cm,height=6cm]{Figure.eps}
\caption{Figure Caption}
\label{a}
\end{figure*}
\section{Literature Survey}
\rhead{Literature Survey}
\label{LiteratureSurvey}
xxxxxx xxxxxx xxxxxx \cite{ SimonBook2006}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx\cite{ Biglieri2006, ProakisBookDC}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ PapoulisBook2002}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx.
\newpage
\section{Motivation}
\rhead{Motivation}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
\newpage
\section{Problem Formulation}
\rhead{Problem Formulation}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
\newpage
\section{Contributions}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
\section{Organization}
\rhead{Organization}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
Chapter_2/chapter_2.tex · 2 KB
\chapter{Title of Chapter 2}
\graphicspath{{Chapter_1/Vector/}{Chapter_1/}}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%
%%%%%% Chapter 1 Section 1
%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%
\section{Title of Section}
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ErdelyiBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ErdelyiBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ JakesBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ ExtonBook}. xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
\subsection{Title of Subsection}
xxxxxx xxxxxx xxxxxx xxxxxx \cite{ SrivastavaBook}xxxxxx xxxxxx xxxxxx xxxxxx \cite{ PrudnikovBookv4}xxxxxx xxxxxx xxxxxx xxxxxx \cite{ LeeBook1998} xxxxxx xxxxxx xxxxxx xxxxxx \cite{ RyzhikBook}xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx \cite{ HoytApr1947} xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx xxxxxx
Figure-eps-converted-to.pdf — binary, 26 KB
Figure.eps — binary, 580 KB
IEEEabrv.bib · 17 KB
IEEEabrv.bib
V1.13 (2008/09/30)
Copyright (c) 2002-2008 by Michael Shell
See: http://www.michaelshell.org/
for current contact information.
BibTeX bibliography string definitions of the ABBREVIATED titles of
IEEE journals and magazines and online publications.
This file is designed for bibliography styles that require
abbreviated titles and is not for use in bibliographies that
require full-length titles.
Support sites:
http://www.michaelshell.org/tex/ieeetran/
http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
and/or
http://www.ieee.org/
Special thanks to Laura Hyslop and ken Rawson of IEEE for their help
in obtaining the information needed to compile this file. Also,
Volker Kuhlmann and Moritz Borgmann kindly provided some corrections
and additions.
*************************************************************************
Legal Notice:
This code is offered as-is without any warranty either expressed or
implied; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE!
User assumes all risk.
In no event shall IEEE or any contributor to this code be liable for
any damages or losses, including, but not limited to, incidental,
consequential, or any other damages, resulting from the use or misuse
of any information contained here.
All comments are the opinions of their respective authors and are not
necessarily endorsed by the IEEE.
This work is distributed under the LaTeX Project Public License (LPPL)
( http://www.latex-project.org/ ) version 1.3, and may be freely used,
distributed and modified. A copy of the LPPL, version 1.3, is included
in the base LaTeX documentation of all distributions of LaTeX released
2003/12/01 or later.
Retain all contribution notices and credits.
** Modified files should be clearly indicated as such, including **
** renaming them and changing author support contact information. **
File list of work: IEEEabrv.bib, IEEEfull.bib, IEEEexample.bib,
IEEEtran.bst, IEEEtranS.bst, IEEEtranSA.bst,
IEEEtranN.bst, IEEEtranSN.bst, IEEEtran_bst_HOWTO.pdf
*************************************************************************
USAGE:
\bibliographystyle{mybstfile}
\bibliography{IEEEabrv,mybibfile}
where the IEEE titles in the .bib database entries use the strings
defined here. e.g.,
journal = IEEE_J_AC,
to yield "{IEEE} Trans. Automat. Contr."
IEEE uses abbreviated journal titles in their bibliographies -
this file is suitable for work that is to be submitted to the IEEE.
For work that requires full-length titles, you should use the full
titles provided in the companion file, IEEEfull.bib.
** NOTES **
1. Journals have been grouped according to subject in order to make it
easier to locate and extract the definitions for related journals -
as most works use references that are confined to a single topic.
Magazines are listed in straight alphabetical order.
2. String names are closely based on IEEE's own internal acronyms.
3. Abbreviations follow IEEE's style.
4. Older, out-of-print IEEE titles are included (but not including titles
dating prior to IEEE's formation from the IRE and AIEE in 1963).
5. The following string definitions have been disabled because their
abbreviations have not yet been verified:
STRING{IEEE_J_LT = "{IEEE} Trans. Learning Technol."}
STRING{IEEE_J_NSM = "{IEEE} Trans. Netw. Service Manag."}
STRING{IEEE_J_SC = "{IEEE} Trans. Services Comput."}
STRING{IEEE_J_STARS = "{IEEE} J. Sel. Topics Appl. Earth Observations Remote Sens."}
If you know what the proper abbreviation is for a string above,
email me and I will correct them in the next release.
IEEE Journals
aerospace and military
@STRING{IEEE_J_AES = "{IEEE} Trans. Aerosp. Electron. Syst."}
@STRING{IEEE_J_ANE = "{IEEE} Trans. Aerosp. Navig. Electron."}
@STRING{IEEE_J_ANNE = "{IEEE} Trans. Aeronaut. Navig. Electron."}
@STRING{IEEE_J_AS = "{IEEE} Trans. Aerosp."}
@STRING{IEEE_J_AIRE = "{IEEE} Trans. Airborne Electron."}
@STRING{IEEE_J_MIL = "{IEEE} Trans. Mil. Electron."}
autos, transportation and vehicles (non-aerospace)
@STRING{IEEE_J_ITS = "{IEEE} Trans. Intell. Transp. Syst."}
@STRING{IEEE_J_VT = "{IEEE} Trans. Veh. Technol."}
@STRING{IEEE_J_VC = "{IEEE} Trans. Veh. Commun."}
circuits, signals, systems, audio and controls
@STRING{IEEE_J_SPL = "{IEEE} Signal Process. Lett."}
@STRING{IEEE_J_ASSP = "{IEEE} Trans. Acoust., Speech, Signal Process."}
@STRING{IEEE_J_AU = "{IEEE} Trans. Audio"}
@STRING{IEEE_J_AUEA = "{IEEE} Trans. Audio Electroacoust."}
@STRING{IEEE_J_AC = "{IEEE} Trans. Autom. Control"}
@STRING{IEEE_J_CAS = "{IEEE} Trans. Circuits Syst."}
@STRING{IEEE_J_CASVT = "{IEEE} Trans. Circuits Syst. Video Technol."}
@STRING{IEEE_J_CASI = "{IEEE} Trans. Circuits Syst. {I}"}
@STRING{IEEE_J_CASII = "{IEEE} Trans. Circuits Syst. {II}"}
in 2004 CASI and CASII renamed part title to CASI_RP and CASII_EB, respectively.
@STRING{IEEE_J_CASI_RP = "{IEEE} Trans. Circuits Syst. {I}"}
@STRING{IEEE_J_CASII_EB = "{IEEE} Trans. Circuits Syst. {II}"}
@STRING{IEEE_J_CT = "{IEEE} Trans. Circuit Theory"}
@STRING{IEEE_J_CST = "{IEEE} Trans. Control Syst. Technol."}
@STRING{IEEE_J_SP = "{IEEE} Trans. Signal Process."}
@STRING{IEEE_J_SU = "{IEEE} Trans. Sonics Ultrason."}
@STRING{IEEE_J_SAP = "{IEEE} Trans. Speech Audio Process."}
@STRING{IEEE_J_STSP = "{IEEE} J. Sel. Topics Signal Process."}
@STRING{IEEE_J_SYST = "{IEEE} Syst. J."}
@STRING{IEEE_J_UE = "{IEEE} Trans. Ultrason. Eng."}
@STRING{IEEE_J_UFFC = "{IEEE} Trans. Ultrason., Ferroelectr., Freq. Control"}
communications
@STRING{IEEE_J_COML = "{IEEE} Commun. Lett."}
@STRING{IEEE_J_JSAC = "{IEEE} J. Sel. Areas Commun."}
@STRING{IEEE_J_COM = "{IEEE} Trans. Commun."}
@STRING{IEEE_J_COMT = "{IEEE} Trans. Commun. Technol."}
@STRING{IEEE_J_WCOM = "{IEEE} Trans. Wireless Commun."}
components, packaging and manufacturing
@STRING{IEEE_J_ADVP = "{IEEE} Trans. Adv. Packag."}
@STRING{IEEE_J_CHMT = "{IEEE} Trans. Compon., Hybrids, Manuf. Technol."}
@STRING{IEEE_J_CPMTA = "{IEEE} Trans. Compon., Packag., Manuf. Technol. {A}"}
@STRING{IEEE_J_CPMTB = "{IEEE} Trans. Compon., Packag., Manuf. Technol. {B}"}
@STRING{IEEE_J_CPMTC = "{IEEE} Trans. Compon., Packag., Manuf. Technol. {C}"}
@STRING{IEEE_J_CAPT = "{IEEE} Trans. Compon. Packag. Technol."}
@STRING{IEEE_J_CAPTS = "{IEEE} Trans. Compon. Packag. Technol."}
@STRING{IEEE_J_CPART = "{IEEE} Trans. Compon. Parts"}
@STRING{IEEE_J_EPM = "{IEEE} Trans. Electron. Packag. Manuf."}
@STRING{IEEE_J_MFT = "{IEEE} Trans. Manuf. Technol."}
@STRING{IEEE_J_PHP = "{IEEE} Trans. Parts, Hybrids, Packag."}
@STRING{IEEE_J_PMP = "{IEEE} Trans. Parts, Mater., Packag."}
CAD
@STRING{IEEE_J_TCAD = "{IEEE} J. Technol. Comput. Aided Design"}
@STRING{IEEE_J_CAD = "{IEEE} Trans. Comput.-Aided Design Integr. Circuits Syst."}
coding, data, information, knowledge
@STRING{IEEE_J_IT = "{IEEE} Trans. Inf. Theory"}
@STRING{IEEE_J_KDE = "{IEEE} Trans. Knowl. Data Eng."}
computers, computation, networking and software
@STRING{IEEE_J_C = "{IEEE} Trans. Comput."}
@STRING{IEEE_J_CAL = "{IEEE} Comput. Archit. Lett."}
@STRING{IEEE_J_DSC = "{IEEE} Trans. Dependable Secure Comput."}
@STRING{IEEE_J_ECOMP = "{IEEE} Trans. Electron. Comput."}
@STRING{IEEE_J_EVC = "{IEEE} Trans. Evol. Comput."}
@STRING{IEEE_J_FUZZ = "{IEEE} Trans. Fuzzy Syst."}
@STRING{IEEE_J_IFS = "{IEEE} Trans. Inf. Forensics Security"}
@STRING{IEEE_J_MC = "{IEEE} Trans. Mobile Comput."}
@STRING{IEEE_J_NET = "{IEEE/ACM} Trans. Netw."}
@STRING{IEEE_J_NN = "{IEEE} Trans. Neural Netw."}
disabled until abbreviation verified
STRING{IEEE_J_NSM = "{IEEE} Trans. Netw. Service Manag."}
@STRING{IEEE_J_PDS = "{IEEE} Trans. Parallel Distrib. Syst."}
disabled until abbreviation verified
STRING{IEEE_J_SC = "{IEEE} Trans. Services Comput."}
@STRING{IEEE_J_SE = "{IEEE} Trans. Softw. Eng."}
computer graphics, imaging, and multimedia
@STRING{IEEE_J_JDT = "{IEEE/OSA} J. Display Technol."}
@STRING{IEEE_J_IP = "{IEEE} Trans. Image Process."}
@STRING{IEEE_J_MM = "{IEEE} Trans. Multimedia"}
@STRING{IEEE_J_VCG = "{IEEE} Trans. Vis. Comput. Graphics"}
cybernetics, ergonomics, robots, man-machine, and automation
@STRING{IEEE_J_ASE = "{IEEE} Trans. Autom. Sci. Eng."}
@STRING{IEEE_J_JRA = "{IEEE} J. Robot. Autom."}
@STRING{IEEE_J_H = "{IEEE} Trans. Haptics"}
@STRING{IEEE_J_HFE = "{IEEE} Trans. Hum. Factors Electron."}
@STRING{IEEE_J_MMS = "{IEEE} Trans. Man-Mach. Syst."}
@STRING{IEEE_J_PAMI = "{IEEE} Trans. Pattern Anal. Mach. Intell."}
in 1989 JRA became RA
in August 2004, RA split into ASE and RO
@STRING{IEEE_J_RA = "{IEEE} Trans. Robot. Autom."}
@STRING{IEEE_J_RO = "{IEEE} Trans. Robot."}
@STRING{IEEE_J_SMC = "{IEEE} Trans. Syst., Man, Cybern."}
@STRING{IEEE_J_SMCA = "{IEEE} Trans. Syst., Man, Cybern. {A}"}
@STRING{IEEE_J_SMCB = "{IEEE} Trans. Syst., Man, Cybern. {B}"}
@STRING{IEEE_J_SMCC = "{IEEE} Trans. Syst., Man, Cybern. {C}"}
@STRING{IEEE_J_SSC = "{IEEE} Trans. Syst. Sci. Cybern."}
earth, wind, fire and water
@STRING{IEEE_J_GE = "{IEEE} Trans. Geosci. Electron."}
@STRING{IEEE_J_GRS = "{IEEE} Trans. Geosci. Remote Sens."}
@STRING{IEEE_J_GRSL = "{IEEE} Geosci. Remote Sens. Lett."}
@STRING{IEEE_J_OE = "{IEEE} J. Ocean. Eng."}
disabled until abbreviation verified
STRING{IEEE_J_STARS = "{IEEE} J. Sel. Topics Appl. Earth Observations Remote Sens."}
education, engineering, history, IEEE, professional
@STRING{IEEE_J_CJECE = "Canadian J. Elect. Comput. Eng."}
@STRING{IEEE_J_PROC = "Proc. {IEEE}"}
@STRING{IEEE_J_EDU = "{IEEE} Trans. Educ."}
@STRING{IEEE_J_EM = "{IEEE} Trans. Eng. Manag."}
@STRING{IEEE_J_EWS = "{IEEE} Trans. Eng. Writing Speech"}
disabled until abbreviation verified
STRING{IEEE_J_LT = "{IEEE} Trans. Learning Technol."}
@STRING{IEEE_J_PC = "{IEEE} Trans. Prof. Commun."}
electromagnetics, antennas, EMI, magnetics and microwave
@STRING{IEEE_J_AWPL = "{IEEE} Antennas Wireless Propag. Lett."}
@STRING{IEEE_J_MGWL = "{IEEE} Microw. Guided Wave Lett."}
IEEE seems to want "Compon." here, not "Comp."
@STRING{IEEE_J_MWCL = "{IEEE} Microw. Wireless Compon. Lett."}
@STRING{IEEE_J_AP = "{IEEE} Trans. Antennas Propag."}
@STRING{IEEE_J_EMC = "{IEEE} Trans. Electromagn. Compat."}
@STRING{IEEE_J_MAG = "{IEEE} Trans. Magn."}
@STRING{IEEE_J_MTT = "{IEEE} Trans. Microw. Theory Tech."}
@STRING{IEEE_J_RFI = "{IEEE} Trans. Radio Freq. Interference"}
@STRING{IEEE_J_TJMJ = "{IEEE} Transl. J. Magn. Jpn."}
energy and power
@STRING{IEEE_J_EC = "{IEEE} Trans. Energy Convers."}
@STRING{IEEE_J_PEL = "{IEEE} Power Electron. Lett."}
@STRING{IEEE_J_PWRAS = "{IEEE} Trans. Power App. Syst."}
@STRING{IEEE_J_PWRD = "{IEEE} Trans. Power Del."}
@STRING{IEEE_J_PWRE = "{IEEE} Trans. Power Electron."}
@STRING{IEEE_J_PWRS = "{IEEE} Trans. Power Syst."}
industrial, commercial and consumer
@STRING{IEEE_J_APPIND = "{IEEE} Trans. Appl. Ind."}
@STRING{IEEE_J_BC = "{IEEE} Trans. Broadcast."}
@STRING{IEEE_J_BCTV = "{IEEE} Trans. Broadcast Television Receivers"}
@STRING{IEEE_J_CE = "{IEEE} Trans. Consum. Electron."}
@STRING{IEEE_J_IE = "{IEEE} Trans. Ind. Electron."}
@STRING{IEEE_J_IECI = "{IEEE} Trans. Ind. Electron. Contr. Instrum."}
@STRING{IEEE_J_IA = "{IEEE} Trans. Ind. Appl."}
@STRING{IEEE_J_IGA = "{IEEE} Trans. Ind. Gen. Appl."}
@STRING{IEEE_J_IINF = "{IEEE} Trans. Ind. Informat."}
@STRING{IEEE_J_PSE = "{IEEE} J. Product Safety Eng."}
instrumentation and measurement
@STRING{IEEE_J_IM = "{IEEE} Trans. Instrum. Meas."}
insulation and materials
@STRING{IEEE_J_JEM = "{IEEE/TMS} J. Electron. Mater."}
@STRING{IEEE_J_DEI = "{IEEE} Trans. Dielectr. Electr. Insul."}
@STRING{IEEE_J_EI = "{IEEE} Trans. Electr. Insul."}
mechanical
@STRING{IEEE_J_MECH = "{IEEE/ASME} Trans. Mechatronics"}
@STRING{IEEE_J_MEMS = "J. Microelectromech. Syst."}
medical and biological
@STRING{IEEE_J_BCAS = "{IEEE} Trans. Biomed. Circuits Syst."}
@STRING{IEEE_J_BME = "{IEEE} Trans. Biomed. Eng."}
Note: The B-ME journal later dropped the hyphen and became the BME.
@STRING{IEEE_J_B-ME = "{IEEE} Trans. Bio-Med. Eng."}
@STRING{IEEE_J_BMELC = "{IEEE} Trans. Bio-Med. Electron."}
@STRING{IEEE_J_CBB = "{IEEE/ACM} Trans. Comput. Biol. Bioinformatics"}
@STRING{IEEE_J_ITBM = "{IEEE} Trans. Inf. Technol. Biomed."}
@STRING{IEEE_J_ME = "{IEEE} Trans. Med. Electron."}
@STRING{IEEE_J_MI = "{IEEE} Trans. Med. Imag."}
@STRING{IEEE_J_NB = "{IEEE} Trans. Nanobiosci."}
@STRING{IEEE_J_NSRE = "{IEEE} Trans. Neural Syst. Rehabil. Eng."}
@STRING{IEEE_J_RBME = "{IEEE} Rev. Biomed. Eng."}
@STRING{IEEE_J_RE = "{IEEE} Trans. Rehabil. Eng."}
optics, lightwave and photonics
@STRING{IEEE_J_PTL = "{IEEE} Photon. Technol. Lett."}
@STRING{IEEE_J_JLT = "J. Lightw. Technol."}
physics, electrons, nanotechnology, nuclear and quantum electronics
@STRING{IEEE_J_EDL = "{IEEE} Electron Device Lett."}
@STRING{IEEE_J_JQE = "{IEEE} J. Quantum Electron."}
@STRING{IEEE_J_JSTQE = "{IEEE} J. Sel. Topics Quantum Electron."}
@STRING{IEEE_J_ED = "{IEEE} Trans. Electron Devices"}
@STRING{IEEE_J_NANO = "{IEEE} Trans. Nanotechnol."}
@STRING{IEEE_J_NS = "{IEEE} Trans. Nucl. Sci."}
@STRING{IEEE_J_PS = "{IEEE} Trans. Plasma Sci."}
reliability
IEEE seems to want "Mat." here, not "Mater."
@STRING{IEEE_J_DMR = "{IEEE} Trans. Device Mater. Rel."}
@STRING{IEEE_J_R = "{IEEE} Trans. Rel."}
semiconductors, superconductors, electrochemical and solid state
@STRING{IEEE_J_ESSL = "{IEEE/ECS} Electrochem. Solid-State Lett."}
@STRING{IEEE_J_JSSC = "{IEEE} J. Solid-State Circuits"}
@STRING{IEEE_J_ASC = "{IEEE} Trans. Appl. Supercond."}
@STRING{IEEE_J_SM = "{IEEE} Trans. Semicond. Manuf."}
sensors
@STRING{IEEE_J_SENSOR = "{IEEE} Sensors J."}
VLSI
@STRING{IEEE_J_VLSI = "{IEEE} Trans. {VLSI} Syst."}
IEEE Magazines
@STRING{IEEE_M_AES = "{IEEE} Aerosp. Electron. Syst. Mag."}
@STRING{IEEE_M_HIST = "{IEEE} Ann. Hist. Comput."}
@STRING{IEEE_M_AP = "{IEEE} Antennas Propag. Mag."}
@STRING{IEEE_M_ASSP = "{IEEE} {ASSP} Mag."}
@STRING{IEEE_M_CD = "{IEEE} Circuits Devices Mag."}
@STRING{IEEE_M_CAS = "{IEEE} Circuits Syst. Mag."}
@STRING{IEEE_M_COM = "{IEEE} Commun. Mag."}
@STRING{IEEE_M_COMSOC = "{IEEE} Commun. Soc. Mag."}
@STRING{IEEE_M_CIM = "{IEEE} Comput. Intell. Mag."}
CSEM changed to CSE in 1999
@STRING{IEEE_M_CSE = "{IEEE} Comput. Sci. Eng."}
@STRING{IEEE_M_CSEM = "{IEEE} Comput. Sci. Eng. Mag."}
@STRING{IEEE_M_C = "{IEEE} Computer"}
@STRING{IEEE_M_CAP = "{IEEE} Comput. Appl. Power"}
@STRING{IEEE_M_CGA = "{IEEE} Comput. Graph. Appl."}
@STRING{IEEE_M_CONC = "{IEEE} Concurrency"}
@STRING{IEEE_M_CS = "{IEEE} Control Syst. Mag."}
@STRING{IEEE_M_DTC = "{IEEE} Des. Test. Comput."}
@STRING{IEEE_M_EI = "{IEEE} Electr. Insul. Mag."}
@STRING{IEEE_M_ETR = "{IEEE} ElectroTechnol. Rev."}
@STRING{IEEE_M_EMB = "{IEEE} Eng. Med. Biol. Mag."}
@STRING{IEEE_M_EMR = "{IEEE} Eng. Manag. Rev."}
@STRING{IEEE_M_EXP = "{IEEE} Expert"}
@STRING{IEEE_M_IA = "{IEEE} Ind. Appl. Mag."}
@STRING{IEEE_M_IE = "{IEEE} Ind. Electron. Mag."}
@STRING{IEEE_M_IM = "{IEEE} Instrum. Meas. Mag."}
@STRING{IEEE_M_IS = "{IEEE} Intell. Syst."}
@STRING{IEEE_M_ITS = "{IEEE} Intell. Transp. Syst. Mag."}
@STRING{IEEE_M_IC = "{IEEE} Internet Comput."}
@STRING{IEEE_M_ITP = "{IEEE} {IT} Prof."}
@STRING{IEEE_M_MICRO = "{IEEE} Micro"}
@STRING{IEEE_M_MW = "{IEEE} Microw. Mag."}
@STRING{IEEE_M_MM = "{IEEE} Multimedia"}
@STRING{IEEE_M_NANO = "{IEEE} Nanotechnol. Mag."}
@STRING{IEEE_M_NET = "{IEEE} Netw."}
IEEE's editorial manual lists "Pers. Commun.",
but "Personal Commun. Mag." seems to be what is used in the journals
@STRING{IEEE_M_PCOM = "{IEEE} Personal Commun. Mag."}
@STRING{IEEE_M_POT = "{IEEE} Potentials"}
CAP and PER merged to form PE in 2003
@STRING{IEEE_M_PE = "{IEEE} Power Energy Mag."}
@STRING{IEEE_M_PER = "{IEEE} Power Eng. Rev."}
@STRING{IEEE_M_PVC = "{IEEE} Pervasive Comput."}
@STRING{IEEE_M_RA = "{IEEE} Robot. Autom. Mag."}
@STRING{IEEE_M_SAP = "{IEEE} Security Privacy"}
@STRING{IEEE_M_SP = "{IEEE} Signal Process. Mag."}
@STRING{IEEE_M_S = "{IEEE} Softw."}
@STRING{IEEE_M_SPECT = "{IEEE} Spectr."}
@STRING{IEEE_M_TS = "{IEEE} Technol. Soc. Mag."}
@STRING{IEEE_M_VT = "{IEEE} Veh. Technol. Mag."}
@STRING{IEEE_M_WC = "{IEEE} Wireless Commun. Mag."}
@STRING{IEEE_M_TODAY = "Today's Engineer"}
IEEE Online Publications
@STRING{IEEE_O_CSTO = "{IEEE} Commun. Surveys Tuts."}
@STRING{IEEE_O_DSO = "{IEEE} Distrib. Syst. Online"}
--
EOF
IEEEfull.bib · 20 KB
IEEEfull.bib
V1.13 (2008/09/30)
Copyright (c) 2002-2008 by Michael Shell
See: http://www.michaelshell.org/
for current contact information.
BibTeX bibliography string definitions of the FULL titles of
IEEE journals and magazines and online publications.
This file is designed for bibliography styles that require
full-length titles and is not for use in bibliographies that
abbreviate titles.
Support sites:
http://www.michaelshell.org/tex/ieeetran/
http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
and/or
http://www.ieee.org/
Special thanks to Laura Hyslop and ken Rawson of IEEE for their help
in obtaining the information needed to compile this file. Also,
Volker Kuhlmann and Moritz Borgmann kindly provided some corrections
and additions.
*************************************************************************
Legal Notice:
This code is offered as-is without any warranty either expressed or
implied; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE!
User assumes all risk.
In no event shall IEEE or any contributor to this code be liable for
any damages or losses, including, but not limited to, incidental,
consequential, or any other damages, resulting from the use or misuse
of any information contained here.
All comments are the opinions of their respective authors and are not
necessarily endorsed by the IEEE.
This work is distributed under the LaTeX Project Public License (LPPL)
( http://www.latex-project.org/ ) version 1.3, and may be freely used,
distributed and modified. A copy of the LPPL, version 1.3, is included
in the base LaTeX documentation of all distributions of LaTeX released
2003/12/01 or later.
Retain all contribution notices and credits.
** Modified files should be clearly indicated as such, including **
** renaming them and changing author support contact information. **
File list of work: IEEEabrv.bib, IEEEfull.bib, IEEEexample.bib,
IEEEtran.bst, IEEEtranS.bst, IEEEtranSA.bst,
IEEEtranN.bst, IEEEtranSN.bst, IEEEtran_bst_HOWTO.pdf
*************************************************************************
USAGE:
\bibliographystyle{mybstfile}
\bibliography{IEEEfull,mybibfile}
where the IEEE titles in the .bib database entries use the strings
defined here. e.g.,
journal = IEEE_J_AC,
to yield "{IEEE} Transactions on Automatic Control"
WARNING: IEEE uses abbreviated journal titles in their bibliographies!
Because this file provides the full titles, you should NOT use this file
for work that is to be submitted to the IEEE.
For IEEE work, you should use the abbreviated titles provided in the
companion file, IEEEabrv.bib.
** NOTES **
1. Journals have been grouped according to subject in order to make it
easier to locate and extract the definitions for related journals -
as most works use references that are confined to a single topic.
Magazines are listed in straight alphabetical order.
2. String names are closely based on IEEE's own internal acronyms.
3. Older, out-of-print IEEE titles are included (but not including titles
dating prior to IEEE's formation from the IRE and AIEE in 1963).
IEEE Journals
aerospace and military
@STRING{IEEE_J_AES = "{IEEE} Transactions on Aerospace and Electronic Systems"}
@STRING{IEEE_J_ANE = "{IEEE} Transactions on Aerospace and Navigational Electronics"}
@STRING{IEEE_J_ANNE = "{IEEE} Transactions on Aeronautical and Navigational Electronics"}
@STRING{IEEE_J_AS = "{IEEE} Transactions on Aerospace"}
@STRING{IEEE_J_AIRE = "{IEEE} Transactions on Airborne Electronics"}
@STRING{IEEE_J_MIL = "{IEEE} Transactions on Military Electronics"}
autos, transportation and vehicles (non-aerospace)
@STRING{IEEE_J_ITS = "{IEEE} Transactions on Intelligent Transportation Systems"}
@STRING{IEEE_J_VT = "{IEEE} Transactions on Vehicular Technology"}
@STRING{IEEE_J_VC = "{IEEE} Transactions on Vehicular Communications"}
circuits, signals, systems, audio and controls
@STRING{IEEE_J_SPL = "{IEEE} Signal Processing Letters"}
@STRING{IEEE_J_ASSP = "{IEEE} Transactions on Acoustics, Speech, and Signal Processing"}
@STRING{IEEE_J_AU = "{IEEE} Transactions on Audio"}
@STRING{IEEE_J_AUEA = "{IEEE} Transactions on Audio and Electroacoustics"}
@STRING{IEEE_J_AC = "{IEEE} Transactions on Automatic Control"}
@STRING{IEEE_J_CAS = "{IEEE} Transactions on Circuits and Systems"}
@STRING{IEEE_J_CASVT = "{IEEE} Transactions on Circuits and Systems for Video Technology"}
@STRING{IEEE_J_CASI = "{IEEE} Transactions on Circuits and Systems---Part {I}: Fundamental Theory and Applications"}
@STRING{IEEE_J_CASII = "{IEEE} Transactions on Circuits and Systems---Part {II}: Analog and Digital Signal Processing"}
in 2004 CASI and CASII renamed part title to CASI_RP and CASII_EB, respectively.
@STRING{IEEE_J_CASI_RP = "{IEEE} Transactions on Circuits and Systems---Part {I}: Regular Papers"}
@STRING{IEEE_J_CASII_EB = "{IEEE} Transactions on Circuits and Systems---Part {II}: Express Briefs"}
@STRING{IEEE_J_CT = "{IEEE} Transactions on Circuit Theory"}
@STRING{IEEE_J_CST = "{IEEE} Transactions on Control Systems Technology"}
@STRING{IEEE_J_SP = "{IEEE} Transactions on Signal Processing"}
@STRING{IEEE_J_SU = "{IEEE} Transactions on Sonics and Ultrasonics"}
@STRING{IEEE_J_SAP = "{IEEE} Transactions on Speech and Audio Processing"}
@STRING{IEEE_J_STSP = "{IEEE} Journal of Selected Topics in Signal Processing"}
@STRING{IEEE_J_SYST = "{IEEE} Systems Journal"}
@STRING{IEEE_J_UE = "{IEEE} Transactions on Ultrasonics Engineering"}
@STRING{IEEE_J_UFFC = "{IEEE} Transactions on Ultrasonics, Ferroelectrics, and Frequency Control"}
communications
@STRING{IEEE_J_COML = "{IEEE} Communications Letters"}
@STRING{IEEE_J_JSAC = "{IEEE} Journal on Selected Areas in Communications"}
@STRING{IEEE_J_COM = "{IEEE} Transactions on Communications"}
@STRING{IEEE_J_COMT = "{IEEE} Transactions on Communication Technology"}
@STRING{IEEE_J_WCOM = "{IEEE} Transactions on Wireless Communications"}
components, packaging and manufacturing
@STRING{IEEE_J_ADVP = "{IEEE} Transactions on Advanced Packaging"}
@STRING{IEEE_J_CHMT = "{IEEE} Transactions on Components, Hybrids and Manufacturing Technology"}
@STRING{IEEE_J_CPMTA = "{IEEE} Transactions on Components, Packaging and Manufacturing Technology---Part {A}"}
@STRING{IEEE_J_CPMTB = "{IEEE} Transactions on Components, Packaging and Manufacturing Technology---Part {B}: Advanced Packaging"}
@STRING{IEEE_J_CPMTC = "{IEEE} Transactions on Components, Packaging and Manufacturing Technology---Part {C}: Manufacturing"}
@STRING{IEEE_J_CAPT = "{IEEE} Transactions on Components and Packaging Technology"}
@STRING{IEEE_J_CAPTS = "{IEEE} Transactions on Components and Packaging Technologies"}
@STRING{IEEE_J_CPART = "{IEEE} Transactions on Component Parts"}
@STRING{IEEE_J_EPM = "{IEEE} Transactions on Electronics Packaging Manufacturing"}
@STRING{IEEE_J_MFT = "{IEEE} Transactions on Manufacturing Technology"}
@STRING{IEEE_J_PHP = "{IEEE} Transactions on Parts, Hybrids and Packaging"}
@STRING{IEEE_J_PMP = "{IEEE} Transactions on Parts, Materials and Packaging"}
CAD
@STRING{IEEE_J_TCAD = "{IEEE} Journal on Technology in Computer Aided Design"}
@STRING{IEEE_J_CAD = "{IEEE} Transactions on Computer-Aided Design of Integrated Circuits and Systems"}
coding, data, information, knowledge
@STRING{IEEE_J_IT = "{IEEE} Transactions on Information Theory"}
@STRING{IEEE_J_KDE = "{IEEE} Transactions on Knowledge and Data Engineering"}
computers, computation, networking and software
@STRING{IEEE_J_C = "{IEEE} Transactions on Computers"}
@STRING{IEEE_J_CAL = "{IEEE} Computer Architecture Letters"}
@STRING{IEEE_J_DSC = "{IEEE} Transactions on Dependable and Secure Computing"}
@STRING{IEEE_J_ECOMP = "{IEEE} Transactions on Electronic Computers"}
@STRING{IEEE_J_EVC = "{IEEE} Transactions on Evolutionary Computation"}
@STRING{IEEE_J_FUZZ = "{IEEE} Transactions on Fuzzy Systems"}
@STRING{IEEE_J_IFS = "{IEEE} Transactions on Information Forensics and Security"}
@STRING{IEEE_J_MC = "{IEEE} Transactions on Mobile Computing"}
@STRING{IEEE_J_NET = "{IEEE/ACM} Transactions on Networking"}
@STRING{IEEE_J_NN = "{IEEE} Transactions on Neural Networks"}
@STRING{IEEE_J_NSM = "{IEEE} Transactions on Network and Service Management"}
@STRING{IEEE_J_PDS = "{IEEE} Transactions on Parallel and Distributed Systems"}
@STRING{IEEE_J_SC = "{IEEE} Transactions on Services Computing"}
@STRING{IEEE_J_SE = "{IEEE} Transactions on Software Engineering"}
computer graphics, imaging, and multimedia
@STRING{IEEE_J_JDT = "{IEEE/OSA} Journal of Display Technology"}
@STRING{IEEE_J_IP = "{IEEE} Transactions on Image Processing"}
@STRING{IEEE_J_MM = "{IEEE} Transactions on Multimedia"}
@STRING{IEEE_J_VCG = "{IEEE} Transactions on Visualization and Computer Graphics"}
cybernetics, ergonomics, robots, man-machine, and automation
@STRING{IEEE_J_ASE = "{IEEE} Transactions on Automation Science and Engineering"}
@STRING{IEEE_J_JRA = "{IEEE} Journal of Robotics and Automation"}
@STRING{IEEE_J_H = "{IEEE} Transactions on Haptics"}
@STRING{IEEE_J_HFE = "{IEEE} Transactions on Human Factors in Electronics"}
@STRING{IEEE_J_MMS = "{IEEE} Transactions on Man-Machine Systems"}
@STRING{IEEE_J_PAMI = "{IEEE} Transactions on Pattern Analysis and Machine Intelligence"}
in 1989 JRA became RA
in August 2004, RA split into ASE and RO
@STRING{IEEE_J_RA = "{IEEE} Transactions on Robotics and Automation"}
@STRING{IEEE_J_RO = "{IEEE} Transactions on Robotics"}
@STRING{IEEE_J_SMC = "{IEEE} Transactions on Systems, Man, and Cybernetics"}
@STRING{IEEE_J_SMCA = "{IEEE} Transactions on Systems, Man, and Cybernetics---Part {A}: Systems and Humans"}
@STRING{IEEE_J_SMCB = "{IEEE} Transactions on Systems, Man, and Cybernetics---Part {B}: Cybernetics"}
@STRING{IEEE_J_SMCC = "{IEEE} Transactions on Systems, Man, and Cybernetics---Part {C}: Applications and Reviews"}
@STRING{IEEE_J_SSC = "{IEEE} Transactions on Systems Science and Cybernetics"}
earth, wind, fire and water
@STRING{IEEE_J_GE = "{IEEE} Transactions on Geoscience Electronics"}
@STRING{IEEE_J_GRS = "{IEEE} Transactions on Geoscience and Remote Sensing"}
@STRING{IEEE_J_GRSL = "{IEEE} Geoscience and Remote Sensing Letters"}
@STRING{IEEE_J_OE = "{IEEE} Journal of Oceanic Engineering"}
@STRING{IEEE_J_STARS = "{IEEE} Journal of Selected Topics in Applied Earth Observations and Remote Sensing"}
education, engineering, history, IEEE, professional
@STRING{IEEE_J_CJECE = "Canadian Journal of Electrical and Computer Engineering"}
@STRING{IEEE_J_PROC = "Proceedings of the {IEEE}"}
@STRING{IEEE_J_EDU = "{IEEE} Transactions on Education"}
@STRING{IEEE_J_EM = "{IEEE} Transactions on Engineering Management"}
@STRING{IEEE_J_EWS = "{IEEE} Transactions on Engineering Writing and Speech"}
@STRING{IEEE_J_LT = "{IEEE} Transactions on Learning Technologies"}
@STRING{IEEE_J_PC = "{IEEE} Transactions on Professional Communication"}
electromagnetics, antennas, EMI, magnetics and microwave
@STRING{IEEE_J_AWPL = "{IEEE} Antennas and Wireless Propagation Letters"}
@STRING{IEEE_J_MGWL = "{IEEE} Microwave and Guided Wave Letters"}
@STRING{IEEE_J_MWCL = "{IEEE} Microwave and Wireless Components Letters"}
@STRING{IEEE_J_AP = "{IEEE} Transactions on Antennas and Propagation"}
@STRING{IEEE_J_EMC = "{IEEE} Transactions on Electromagnetic Compatibility"}
@STRING{IEEE_J_MAG = "{IEEE} Transactions on Magnetics"}
@STRING{IEEE_J_MTT = "{IEEE} Transactions on Microwave Theory and Techniques"}
@STRING{IEEE_J_RFI = "{IEEE} Transactions on Radio Frequency Interference"}
@STRING{IEEE_J_TJMJ = "{IEEE} Translation Journal on Magnetics in Japan"}
energy and power
@STRING{IEEE_J_EC = "{IEEE} Transactions on Energy Conversion"}
@STRING{IEEE_J_PEL = "{IEEE} Power Electronics Letters"}
@STRING{IEEE_J_PWRAS = "{IEEE} Transactions on Power Apparatus and Systems"}
@STRING{IEEE_J_PWRD = "{IEEE} Transactions on Power Delivery"}
@STRING{IEEE_J_PWRE = "{IEEE} Transactions on Power Electronics"}
@STRING{IEEE_J_PWRS = "{IEEE} Transactions on Power Systems"}
industrial, commercial and consumer
@STRING{IEEE_J_APPIND = "{IEEE} Transactions on Applications and Industry"}
@STRING{IEEE_J_BC = "{IEEE} Transactions on Broadcasting"}
@STRING{IEEE_J_BCTV = "{IEEE} Transactions on Broadcast and Television Receivers"}
@STRING{IEEE_J_CE = "{IEEE} Transactions on Consumer Electronics"}
@STRING{IEEE_J_IE = "{IEEE} Transactions on Industrial Electronics"}
@STRING{IEEE_J_IECI = "{IEEE} Transactions on Industrial Electronics and Control Instrumentation"}
@STRING{IEEE_J_IA = "{IEEE} Transactions on Industry Applications"}
@STRING{IEEE_J_IGA = "{IEEE} Transactions on Industry and General Applications"}
@STRING{IEEE_J_IINF = "{IEEE} Transactions on Industrial Informatics"}
@STRING{IEEE_J_PSE = "{IEEE} Journal of Product Safety Engineering"}
instrumentation and measurement
@STRING{IEEE_J_IM = "{IEEE} Transactions on Instrumentation and Measurement"}
insulation and materials
@STRING{IEEE_J_JEM = "{IEEE/TMS} Journal of Electronic Materials"}
@STRING{IEEE_J_DEI = "{IEEE} Transactions on Dielectrics and Electrical Insulation"}
@STRING{IEEE_J_EI = "{IEEE} Transactions on Electrical Insulation"}
mechanical
@STRING{IEEE_J_MECH = "{IEEE/ASME} Transactions on Mechatronics"}
@STRING{IEEE_J_MEMS = "{IEEE/ASME} Journal of Microelectromechanical Systems"}
medical and biological
@STRING{IEEE_J_BCAS = "{IEEE} Transactions on Biomedical Circuits and Systems"}
@STRING{IEEE_J_BME = "{IEEE} Transactions on Biomedical Engineering"}
Note: The B-ME journal later dropped the hyphen and became the BME.
@STRING{IEEE_J_B-ME = "{IEEE} Transactions on Bio-Medical Engineering"}
@STRING{IEEE_J_BMELC = "{IEEE} Transactions on Bio-Medical Electronics"}
@STRING{IEEE_J_CBB = "{IEEE/ACM} Transactions on Computational Biology and Bioinformatics"}
@STRING{IEEE_J_ITBM = "{IEEE} Transactions on Information Technology in Biomedicine"}
@STRING{IEEE_J_ME = "{IEEE} Transactions on Medical Electronics"}
@STRING{IEEE_J_MI = "{IEEE} Transactions on Medical Imaging"}
@STRING{IEEE_J_NB = "{IEEE} Transactions on NanoBioscience"}
@STRING{IEEE_J_NSRE = "{IEEE} Transactions on Neural Systems and Rehabilitation Engineering"}
@STRING{IEEE_J_RBME = "{IEEE} Reviews in Biomedical Engineering"}
@STRING{IEEE_J_RE = "{IEEE} Transactions on Rehabilitation Engineering"}
optics, lightwave and photonics
@STRING{IEEE_J_PTL = "{IEEE} Photonics Technology Letters"}
@STRING{IEEE_J_JLT = "{IEEE/OSA} Journal of Lightwave Technology"}
physics, electrons, nanotechnology, nuclear and quantum electronics
@STRING{IEEE_J_EDL = "{IEEE} Electron Device Letters"}
@STRING{IEEE_J_JQE = "{IEEE} Journal of Quantum Electronics"}
@STRING{IEEE_J_JSTQE = "{IEEE} Journal of Selected Topics in Quantum Electronics"}
@STRING{IEEE_J_ED = "{IEEE} Transactions on Electron Devices"}
@STRING{IEEE_J_NANO = "{IEEE} Transactions on Nanotechnology"}
@STRING{IEEE_J_NS = "{IEEE} Transactions on Nuclear Science"}
@STRING{IEEE_J_PS = "{IEEE} Transactions on Plasma Science"}
reliability
@STRING{IEEE_J_DMR = "{IEEE} Transactions on Device and Materials Reliability"}
@STRING{IEEE_J_R = "{IEEE} Transactions on Reliability"}
semiconductors, superconductors, electrochemical and solid state
@STRING{IEEE_J_ESSL = "{IEEE/ECS} Electrochemical and Solid-State Letters"}
@STRING{IEEE_J_JSSC = "{IEEE} Journal of Solid-State Circuits"}
@STRING{IEEE_J_ASC = "{IEEE} Transactions on Applied Superconductivity"}
@STRING{IEEE_J_SM = "{IEEE} Transactions on Semiconductor Manufacturing"}
sensors
@STRING{IEEE_J_SENSOR = "{IEEE} Sensors Journal"}
VLSI
@STRING{IEEE_J_VLSI = "{IEEE} Transactions on Very Large Scale Integration ({VLSI}) Systems"}
IEEE Magazines
@STRING{IEEE_M_AES = "{IEEE} Aerospace and Electronics Systems Magazine"}
@STRING{IEEE_M_HIST = "{IEEE} Annals of the History of Computing"}
@STRING{IEEE_M_AP = "{IEEE} Antennas and Propagation Magazine"}
@STRING{IEEE_M_ASSP = "{IEEE} {ASSP} Magazine"}
@STRING{IEEE_M_CD = "{IEEE} Circuits and Devices Magazine"}
@STRING{IEEE_M_CAS = "{IEEE} Circuits and Systems Magazine"}
@STRING{IEEE_M_COM = "{IEEE} Communications Magazine"}
@STRING{IEEE_M_COMSOC = "{IEEE} Communications Society Magazine"}
@STRING{IEEE_M_CIM = "{IEEE} Computational Intelligence Magazine"}
CSEM changed to CSE in 1999
@STRING{IEEE_M_CSE = "{IEEE} Computing in Science and Engineering"}
@STRING{IEEE_M_CSEM = "{IEEE} Computational Science and Engineering Magazine"}
@STRING{IEEE_M_C = "{IEEE} Computer"}
@STRING{IEEE_M_CAP = "{IEEE} Computer Applications in Power"}
@STRING{IEEE_M_CGA = "{IEEE} Computer Graphics and Applications"}
@STRING{IEEE_M_CONC = "{IEEE} Concurrency"}
@STRING{IEEE_M_CS = "{IEEE} Control Systems Magazine"}
@STRING{IEEE_M_DTC = "{IEEE} Design and Test of Computers"}
@STRING{IEEE_M_EI = "{IEEE} Electrical Insulation Magazine"}
@STRING{IEEE_M_ETR = "{IEEE} ElectroTechnology Review"}
@STRING{IEEE_M_EMB = "{IEEE} Engineering in Medicine and Biology Magazine"}
@STRING{IEEE_M_EMR = "{IEEE} Engineering Management Review"}
@STRING{IEEE_M_EXP = "{IEEE} Expert"}
@STRING{IEEE_M_IA = "{IEEE} Industry Applications Magazine"}
@STRING{IEEE_M_IE = "{IEEE} Industrial Electronics Magazine"}
@STRING{IEEE_M_IM = "{IEEE} Instrumentation and Measurement Magazine"}
@STRING{IEEE_M_IS = "{IEEE} Intelligent Systems"}
@STRING{IEEE_M_ITS = "{IEEE} Intelligent Transportation Systems Magazine"}
@STRING{IEEE_M_IC = "{IEEE} Internet Computing"}
@STRING{IEEE_M_ITP = "{IEEE} {IT} Professional"}
@STRING{IEEE_M_MICRO = "{IEEE} Micro"}
@STRING{IEEE_M_MW = "{IEEE} Microwave Magazine"}
@STRING{IEEE_M_MM = "{IEEE} Multimedia"}
@STRING{IEEE_M_NANO = "{IEEE} Nanotechnology Magazine"}
@STRING{IEEE_M_NET = "{IEEE} Network"}
@STRING{IEEE_M_PCOM = "{IEEE} Personal Communications Magazine"}
@STRING{IEEE_M_POT = "{IEEE} Potentials"}
CAP and PER merged to form PE in 2003
@STRING{IEEE_M_PE = "{IEEE} Power and Energy Magazine"}
@STRING{IEEE_M_PER = "{IEEE} Power Engineering Review"}
@STRING{IEEE_M_PVC = "{IEEE} Pervasive Computing"}
@STRING{IEEE_M_RA = "{IEEE} Robotics and Automation Magazine"}
@STRING{IEEE_M_SAP = "{IEEE} Security and Privacy"}
@STRING{IEEE_M_SP = "{IEEE} Signal Processing Magazine"}
@STRING{IEEE_M_S = "{IEEE} Software"}
@STRING{IEEE_M_SPECT = "{IEEE} Spectrum"}
@STRING{IEEE_M_TS = "{IEEE} Technology and Society Magazine"}
@STRING{IEEE_M_VT = "{IEEE} Vehicular Technology Magazine"}
@STRING{IEEE_M_WC = "{IEEE} Wireless Communications Magazine"}
@STRING{IEEE_M_TODAY = "Today's Engineer"}
IEEE Online Publications
@STRING{IEEE_O_CSTO = "{IEEE} Communications Surveys and Tutorials"}
@STRING{IEEE_O_DSO = "{IEEE} Distributed Systems Online"}
--
EOF
IITBBS_PhD_Thesis_Main_File.tex — the file that is compiled · 14 KB
\documentclass[12pt,a4paper]{report}
%\documentclass[12pt, twoside,openright]{report}
\usepackage[]{graphicx}
%\usepackage{fontspec}
%\setmainfont{Code2000}
%\usepackage{,epsfig}
\usepackage[centertags]{amsmath}
\usepackage{epstopdf,amsfonts,epsfig,cite,array,multirow,graphicx,amsmath,amsthm,ltablex,tabularx,setspace,arydshln,amssymb,multirow,enumerate}
%%%%%%% Inline listing package
%\usepackage[inline]{enumitem}
\DeclareMathOperator{\arccot}{arccot}
\DeclareMathOperator{\sinc}{sinc}
%\usepackage{marvosym}
%\usepackage{moderncvcompatibility}
\usepackage{geometry}
\geometry{tmargin=20mm,bmargin=20mm,lmargin=30mm,rmargin=25mm}
%\usepackage[cmex10]{amsmath}
\newcommand{\matr}[1]{\mathbf{#1}}
%%%%%%%%%%%% Run this package final time or if any error %%%%%%%%%
%\usepackage{fancyhdr}
\usepackage[titletoc]{appendix}
\usepackage[usenames,dvipsnames]{xcolor}
\usepackage{graphics}
\usepackage{cite}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{amsfonts}
\usepackage{tikz}
\usepackage{setspace}
\usepackage{color}
\usepackage{relsize}
\usepackage{bigints}
\usetikzlibrary{shapes,arrows,fit,calc,positioning}
\usetikzlibrary{decorations.shapes}
\definecolor{colorgreen}{rgb}{0.2,0.5,0.3}
\definecolor{colorblue}{rgb}{0,0,0}
\usetikzlibrary{decorations.pathmorphing}
\usepackage{subfigure}
%\usepackage{hyperref}
\usepackage{ellipsis}
\usetikzlibrary{calc}
\usetikzlibrary{decorations.pathreplacing,decorations.markings,shapes.geometric}
\tikzset{naming/.style={align=center,font=\small}}
\tikzset{antenna/.style={colorblue, thick,insert path={-- coordinate (ant#1) ++(0,0.2) -- +(135:0.2) + (0,0) -- +(45:0.2)}}}
\tikzset{station/.style={naming,draw,shape=dart, thick,colorblue,shape border rotate=90, minimum width=15mm, minimum height=15mm,outer sep=0pt,inner sep=3pt}}
\tikzset{stationnew/.style={naming,draw,shape=dart, thick,colorblue,shape border rotate=90, minimum width=20mm, minimum height=20mm,outer sep=0pt,inner sep=3pt}}
%\tikzset{mobile/.style={naming,draw,shape=rectangle,minimum width=15mm,minimum height=7.5mm, outer sep=0pt,inner sep=3pt}}
\tikzset{mobile/.style={naming,draw,shape=rectangle,fill=olive!40,minimum width=3mm,minimum height=3mm, outer sep=0pt,inner sep=3pt}}
\tikzset{radiation/.style={{decorate,decoration={expanding waves,angle=90,segment length=4pt}}}}
\tikzset{
double arrow/.style args={#1 colored by #2 and #3}{
-stealth,line width=#1,#2, % first arrow
postaction={draw,-stealth,#3,line width=(#1)/3,
shorten <=(#1)/3,shorten >=2*(#1)/3}, % second arrow
}
}
\tikzset{
double dasharrow/.style args={#1 colored by #2 and #3}{
-stealth,dashed,line width=#1,#2, % first arrow
postaction={draw,-stealth,#3,line width=(#1)/3,
shorten <=(#1)/3,shorten >=2*(#1)/3}, % second arrow
}
}
\newcommand{\UE}[1]{%
\begin{tikzpicture}[every node/.append style={rectangle,minimum width=0pt}]
\node[mobile] (box) {#1};
\draw ([xshift=.25cm] box.south west)
([xshift=-.25cm]box.south east);
%\fill ([xshift=.25cm] box.south west) circle (1pt)
% ([xshift=-.25cm]box.south east) circle (1pt);
\draw (box.north) [antenna=1];
\end{tikzpicture}
}
\newcommand{\BS}[1]{%
\begin{tikzpicture}
\node[station] (base) {#1};
%\draw[line join=bevel] (base.110) -- (base.70) -- (base.north west) -- (base.north east) -- cycle;
\draw[line join=bevel,colorblue] (base.100) -- (base.80) -- (base.110) -- (base.70) -- (base.north west) -- (base.north east);
\draw[line join=bevel,colorblue] (base.100) -- (base.70) (base.110) -- (base.north east);
% original yshift=.8pt
\draw[line cap=rect] ([yshift=0pt]base.north) [antenna=1];
\end{tikzpicture}
}
\newcommand{\BSnew}[1]{
\begin{tikzpicture}[scale=2.0]
\node[stationnew] (base) {#1};
\draw[line join=bevel] (base.110) -- (base.70) -- (base.north west) -- (base.north east) -- cycle;
\draw[line join=bevel,colorblue] (base.100) -- (base.80) -- (base.110) -- (base.70) -- (base.north west) -- (base.north east);
\draw[line join=bevel,colorblue] (base.100) -- (base.70) (base.110) -- (base.north east);
% original yshift=.8pt
\draw[line cap=rect] ([yshift=0pt]base.north) [antenna=1];
\end{tikzpicture}
}
\newcommand{\RELAY}[1]{%
\begin{tikzpicture}[scale=0.2]
%\node[] (naming) {#1};
\draw[thick,colorblue] (0,0) -- (1,4);% left line
\draw[thick,colorblue] (3,0) -- (2,4);% right line
\draw[semithick,colorblue] (0,0) arc (180:0:1.5 and -0.5) node[above, midway]{#1};
\node[inner sep=4pt,colorblue] (circ) at (1.5,5.5) {};
\draw[semithick,colorblue] (1.5,5.5) circle(8pt);
\draw[semithick,colorblue] (1.5,5.5cm-8pt) -- (1.5,4);
\draw[semithick,colorblue] (1.5,4) ellipse (0.5 and 0.166);
\draw[semithick,radiation,decoration={angle=45}] (1.5cm+8pt,5.5) -- +(0:2);
\draw[semithick,radiation,decoration={angle=45}] (1.5cm-8pt,5.5) -- +(180:2);
%\fill[color = Aquamarine!80](0,0)--(1,4) -- (2,4)--(3,0)--cycle ;
\end{tikzpicture}
}
\newcommand{\RELAYnew}[1]{%
\begin{tikzpicture}[scale=0.25]
%\node[] (naming) {#1};
\draw[thick,colorblue] (0,0) -- (1,4);% left line
\draw[thick,colorblue] (3,0) -- (2,4);% right line
\draw[semithick,colorblue] (0,0) arc (180:0:1.5 and -0.5) node[above, midway]{#1};
\node[inner sep=4pt,colorblue] (circ) at (1.5,5.5) {};
\draw[semithick,colorblue] (1.5,5.5) circle(8pt);
\draw[semithick,colorblue] (1.5,5.5cm-8pt) -- (1.5,4);
\draw[semithick,colorblue] (1.5,4) ellipse (0.5 and 0.166);
\draw[semithick,radiation,decoration={angle=45}] (1.5cm+8pt,5.5) -- +(0:2);
\draw[semithick,radiation,decoration={angle=45}] (1.5cm-8pt,5.5) -- +(180:2);
%\fill[color = Aquamarine!80](0,0)--(1,4) -- (2,4)--(3,0)--cycle ;
\end{tikzpicture}
}
\newcommand{\MBS}[1]{%
\begin{tikzpicture}
\node[stationnew] (base) {#1};
%\draw[line join=bevel] (base.110) -- (base.70) -- (base.north west) -- (base.north east) -- cycle;
\draw[line join=bevel,colorblue] (base.100) -- (base.80) -- (base.110) -- (base.70) -- (base.north west) -- (base.north east);
\draw[line join=bevel,colorblue] (base.100) -- (base.70) (base.110) -- (base.north east);
% original yshift=.8pt
%\draw[line cap=rect] ([xshift=.5cm,yshift=.3pt] base.north) [antenna=1];
%\draw[line cap=rect] ([yshift=.3pt]ant1 |- base.north) -- node[above,shape=rectangle,inner ysep=+.3333em]{\dots} ([xshift=-.5cm,yshift=.3pt]base.north) [antenna=2];
\draw[line cap=rect] ([xshift=-.1768cm,yshift=.6pt]base.north -| base.right tail) [antenna=1];
\draw[line cap=rect] ([yshift=.6pt]ant1 |- base.north) -- node[above,shape=rectangle,inner ysep=+.3333em]{\dots} ([xshift=.1768cm,yshift=.6pt]base.north -| base.left tail) [antenna=2];
\draw[line cap=rect] ([yshift=.6pt]ant1 |- base.north) -- node[above,shape=rectangle,inner ysep=+.3333em,]{\dots} ([xshift=.1768cm,yshift=.6pt]base.north -| base.left tail) [antenna=3];
%\draw[line cap=rect] ([yshift=.3pt]ant1 |- base.north) -- ([xshift=-.5cm,yshift=.3pt]base.north) [antenna=2];
%\node at ($(ant1)!0.5!(ant2)$) {\dots};
\end{tikzpicture}
}
\newcommand{\MOBILE}[1]{%
\begin{tikzpicture}[scale=0.25]
\begin{scope}[line join=round,looseness=0.25, line cap=round]
\begin{scope}
\clip [preaction={left color=blue!10, right color=blue!30}]
(1/2,-1) to [bend left] (0,10)
to [bend left] ++(1,1) -- ++(0,2)
arc (180:0:3/4 and 1/2) -- ++(0,-2)
to [bend left] ++(5,-2) coordinate (A) to [bend left] ++(-1/2,-11)
to [bend left] ++(-1,-1) to [bend left] cycle;
%
\path [left color=blue!30, right color=blue!50]
(A) to [bend left] ++(0,-11) to[bend left] ++(-3/2,-2)
-- ++(0,12);
%
\path [fill=blue!20, draw=white, line width=0.25cm]
(0,10) to [bend left] ++(1,1) -- ++(0,2)
arc (180:0:3/4 and 1/2) -- ++(0,-2)
to [bend left] (A) to [bend left] ++(-3/2,-5/4)
to [bend right] cycle;
%
\draw [line width=0.25cm, fill=white]
(9/8,21/2) arc (180:360:5/8 and 3/8) --
++(0,2.5) arc (0:180:5/8 and 3/8) -- cycle;
%
\draw [line width=0.25cm, fill=white]
(9/8,13) arc (180:360:5/8 and 3/8);
%
\fill [white, shift=(225:0.5)]
(1,17/2) to [bend left] ++(4,-7/4)
to [bend left] ++(0,-7/2) to [bend left] ++(-4, 6/4)
to [bend left] cycle;
%
\fill [black, shift=(225:0.25)]
(1,17/2) to [bend left] ++(4,-7/4)
to [bend left] ++(0,-7/2) to [bend left] ++(-4, 6/4)
to [bend left] cycle;
%
\shade [inner color=white, outer color=cyan!20]
(1,17/2) to [bend left] ++(4,-7/4)
to [bend left] ++(0,-7/2) to [bend left] ++(-4, 6/4)
to [bend left] cycle;
\draw [line width=0.25cm, shorten <=-0.5cm, shorten >=-0.5cm]
(1,17/2) to [bend left] ++(4,-7/4)
to [bend left] ++(0,-7/2);
%
\foreach \i in {1,2,3}
\foreach \j in {1,2,3}
\draw [line width=0.125cm, top color=gray,
bottom color=white, yslant=-3/8, rounded corners=1cm/8]
(\i*3/2-1/2,-\j+4) rectangle ++(1,3/4);
%
\draw [line width=0.125cm, top color=gray, bottom color=white, yslant=-3/8]
(3,0) ellipse [x radius=1/2, y radius=1/3];
%
\draw [line width=0.125cm, top color=gray, bottom color=white, yslant=-3/8]
(3,19/2) ellipse [x radius=1, y radius=1/4];
\end{scope}
\draw [line width=0.5cm]
(1/2,-1) to [bend left] (0,10)
to [bend left] ++(1,1) -- ++(0,2)
arc (180:0:3/4 and 1/2) -- ++(0,-2)
to [bend left] ++(5,-2) to [bend left] ++(-1/2,-11)
to [bend left] ++(-1,-1) to [bend left] cycle;
\end{scope}%
\end{tikzpicture}
}
\usepackage[acronym,nomain]{glossaries}
\usepackage{amsthm}
\usepackage{amssymb}
\usepackage{graphicx,subfigure}
%\usepackage[center]{caption}
\usepackage{amsmath}
\usepackage{graphicx}
%\usepackage[chapter]{algorithm}
\usepackage{algpseudocode}
%\usepackage{algorithm}
%\usepackage{algorithmic}
\usepackage{dcolumn}
\usepackage{bigints}
\usepackage{psfig}
\usepackage{cite}
%\usepackage{subcaption}
\usepackage{notoccite}
\usepackage{float}
%\usepackage{subfig}
%\usepackage{graphicx}
\usepackage{caption}
%\usepackage{longtable}
%\usepackage{color} %May be necessary if you want to color links
%\usepackage{hyperref}
%\hypersetup{
% breaklinks=true,
% colorlinks=true, %set true if you want colored links
% linktoc=all, %set to all if you want both sections and subsections linked
% linkcolor=black, %choose some color if you want links to stand out
%}
\usepackage{hyperref}
\hypersetup{breaklinks=true, colorlinks=true, linkcolor=black, citecolor=black}
\hypersetup{urlcolor=black}
\DeclareMathOperator*{\argmin}{arg\;min}
\DeclareMathOperator*{\argmax}{arg\;max}
\newcounter{MYtempeqncnt}
%\usepackage{url}
%\usepackage{bbm}
%\usepackage{eufrak}
%%%%%%%%%%%%%
\newtheorem{theorem}{Theorem}[chapter]
\newtheorem{proposition}{Proposition}[chapter]
\newtheorem{lemma}{Lemma}[chapter]
\newtheorem{definition}{Definition}[chapter]
\newcommand\blfootnote[1]{%
\begingroup
\renewcommand\thefootnote{}\footnote{#1}%
\addtocounter{footnote}{-1}%
\endgroup
}
% \pagestyle{fancy}
% \renewcommand{\sectionmark}[1]{\markright{\thesection\ #1}}
% \fancyhf{}
%\lhead{\fancyplain{}{\rightmark }}
%\cfoot{\fancyplain{}{\thepage}}
%\doublespacing
%
%
%
%
\setlength{\parindent}{1em}
\setlength{\parskip}{1.25em}
\renewcommand{\baselinestretch}{1.35}
\newtheorem{prop}{Proposition}
%-------------------------------------------------------------------
%\renewcommand{\contentsname}{Table of Contents}
%\makeatother
\usepackage{fancyhdr}
\usepackage{lipsum}% just to generate text for the example
%%%%%%%%%% To rename Table of Contents
\renewcommand{\contentsname}{Contents}
%%%%%%%%%%
%\flushbottom
%--------------------------------------------------------------------------
\raggedbottom % (Remove Unnecessary space b/w paragraphs)
%--------------------------------------------------------------------------
\begin{document}
\pagenumbering{roman}
% --------- Title and abstract etc the front matter -----------
\input{cover_page}
\newpage
%%%%%%%%%%
\pagenumbering{roman}
\include{frontmatter}
%%%%%%%%%%%%
\newpage
\chapter*{\centering Abstract}
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{Abstract}}
\cfoot{\fancyplain{}{\thepage}}
\addcontentsline{toc}{chapter}{Abstract}
\input{Abstract/abstract}
%\input{Abstract_2}
%\newpage\null\newpage
%\newpage
%%%%%%% To create single spacing in contents
%\singlespacing
\renewcommand{\baselinestretch}{1}
\pagestyle{fancy}
\fancyhf{}
%\rhead{\footnotesize{Contents}}
\rhead{\fancyplain{}{Contents}}
\cfoot{\fancyplain{}{\thepage}}
\tableofcontents
%\newpage\null
\newpage
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{List of Figures}}
\cfoot{\fancyplain{}{\thepage}}
\addcontentsline{toc}{chapter}{List of Figures}
\listoffigures
%\newpage
%\addcontentsline{toc}{chapter}{List of Algorithms}
%\listofalgorithms
\newpage
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{List of Tables}}
\cfoot{\fancyplain{}{\thepage}}
\addcontentsline{toc}{chapter}{List of Tables}
\listoftables
%\newpage\null\newpage
\newpage
%\fancyhf{}
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{List of Abbreviations}}
\cfoot{\fancyplain{}{\thepage}}
%\null\newpage
\addcontentsline{toc}{chapter}{List of Abbreviations}
\input{glossary_2}
\newpage
%\null\newpage
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{List of Symbols}}
\cfoot{\fancyplain{}{\thepage}}
\addcontentsline{toc}{chapter}{List of Symbols}
\input{symbols}
\newpage
\pagenumbering{arabic}
%%%%%%%% To create double spacing
\doublespacing
\newpage
\pagestyle{fancy}
\renewcommand{\sectionmark}[1]{\markright{#1}}
\renewcommand{\chaptermark}[1]{\markboth{\chaptername~\thechapter~-~#1}{}}
\fancyhf{}
\rhead{\fancyplain{}{\rightmark}}
\lhead{\fancyplain{}{\leftmark }}
\cfoot{\fancyplain{}{\thepage}}
\input{Chapter_1/chapter_1}
\newpage
% %\newpage\null\newpage
\input{Chapter_2/chapter_2}
\newpage
% %\newpage\null\newpage
% \input{Chapter_3/chapter_3}
% \newpage
% %\newpage\null\newpage
% \input{Chapter_4/chapter_4}
% \newpage
\lhead{}
\rhead{\footnotesize Appendix}
\appendix
\addcontentsline{toc}{chapter}{Appendix}
\input{Appendices/appendix0}
%\input{Appendices/appendix1}
%\input{Appendices/appendix2}
%\input{Appendices/appendix3}
\newpage
\singlespacing
% %\newpage\null\newpage
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{Publications}}
\cfoot{\fancyplain{}{\thepage}}
\addcontentsline{toc}{chapter}{Publications}
\input{Publications/PublDDixit}
\newpage
\singlespacing
\pagestyle{fancy}
\fancyhf{}
\rhead{\fancyplain{}{Bibliography}}
\cfoot{\fancyplain{}{\thepage}}
\addcontentsline{toc}{chapter}{Bibliography}
\bibliographystyle{IEEEtran}
\bibliography{IEEEabrv,bibliography}
\end{document}
Publications/PublDDixit.tex · 291 B
\chapter*{Publications}
\graphicspath{{Publications/Vector/}{Publications/}}
\noindent{\bf {Journal Publications}}
\begin{enumerate}
\item{ }
\item{ }
\item{ }
\end{enumerate}
\noindent{\bf{Conference Publication}}
\begin{enumerate}
\item
\item
\end{enumerate}bibliography.bib · 5 KB
%%%%%%%%%%% Books
%%%%%%%%%% Paper1: mixed eta-mu and kappa-mu fading
%%%%%%%%%%% 1954
@BOOK{ErdelyiBook,
AUTHOR = {A. Erd$\acute{\text{e}}$lyi and W. Magnus and F. Oberhettinger and F. G. Tricomi},
TITLE = {Tables of Integral Transforms Vol. I} ,
PUBLISHER = {New York, NY: McGraw-Hill Book Company, Inc.},
YEAR = {1954},
edition = {},}
%%%%%%%%%%%%% 1974
@BOOK{JakesBook,
AUTHOR = {William C. Jakes},
TITLE = {Microwave Mobile Communications},
PUBLISHER = {IEEE Press},
YEAR = {1974},
edition = {2nd},}
}
%%%%%%%%%%% 1976
@BOOK{ExtonBook,
AUTHOR = {H. Exton},
TITLE = {Multiple Hypergeometric Functions and Applications},
PUBLISHER = {New York: Wiley},
YEAR = {1976},
edition = {},}
}
%%%%%%%%% 1985
@BOOK{SrivastavaBook,
AUTHOR = {H. M. Srivastava and P. K. Karlsson },
TITLE = {Multiple Gaussian Hypergeometric Series},
PUBLISHER = {New York, NY: John Wiley \& Sons},
YEAR = {1985},
edition = {},}
%%%%%%%%% 1986
@BOOK{PrudnikovBookv4,
AUTHOR = {A. P. Prudnikov and Y. A. Brychkov and O. I. Marichev},
TITLE = {Integrals and Series},
PUBLISHER = {Gordon and Breach Science Publishers},
YEAR = {1986},
volume= {4},
edition = {4th},}
%%%%%%%%% 1998
@BOOK{LeeBook1998,
AUTHOR = {W. C. Y. Lee},
TITLE = {Mobile Communications Engineering: Theory and Applications},
PUBLISHER = {New York: McGraw-Hill},
YEAR = {1998},
edition = {2nd},
}
%%%%%%%%% 2000
@BOOK{RyzhikBook,
AUTHOR = {I. S. Gradshteyn and I. M. Ryzhik},
TITLE = {Table of Integrals, Series, and Products},
PUBLISHER = {New York: Academic Press},
YEAR = {2007},
edition = {7th},
}
@BOOK{SimonBook2006,
AUTHOR = {M. K. Simon},
TITLE = {Probability Distributions Involving Gaussian Random Variables, A Handbook for Engineers and Scientists},
PUBLISHER = {New York, NY, USA: Springer},
YEAR = {2006},
edition = {1st},
}
@BOOK{Biglieri2006,
AUTHOR = {Ezio Biglieri and Robert Calderbank and Anthony Constantinides and Andrea Goldsmith and Arogyaswami Paulraj and H. Vincent Poor},
TITLE = {MIMO Wireless Communications},
PUBLISHER = {Cambridge University Press},
YEAR = {2006},
edition = {1st},
}
%%%%%%%%%% 2001
@BOOK{ProakisBookDC,
AUTHOR = {J. G. Proakis},
TITLE = {Digital Communications},
PUBLISHER = {New York: McGraw-Hill},
YEAR = {2001},
edition = {4th},}
@BOOK{ProakisBookDC2,
AUTHOR = {J. G. Proakis and M. Salehi},
TITLE = {Fundamentals of Communication Systems},
PUBLISHER = {Pearson},
YEAR = {2006},
edition = {1st},}
@BOOK{StuberBook,
AUTHOR = {Gordon L. St{\"{u}}ber},
TITLE = {Principles of Mobile Communication},
PUBLISHER = {Kluwer},
YEAR = {2001},
edition = {2nd},}
%%%%%%%%%%%% 2002
@BOOK{PapoulisBook2002,
AUTHOR = {A. Papoulis and S. U. Pillai},
TITLE = {Probability, Random Variables And Stochastic Processes},
PUBLISHER = {New York: McGraw-Hill},
YEAR = {2004},
edition = {4th},}
%%%%%%%%%%%% 2004
@BOOK{BoydBook2004,
AUTHOR = {Stephen Boyd and Lieven Vandenberghe},
TITLE = {Convex Optimization},
PUBLISHER = {Cambridge University Press},
YEAR = {2004},
edition = {1st},}
%%%%%%%%%%% 2005
@BOOK{SimonBookDC,
AUTHOR = {M. K. Simon and M.-S. Alouini},
TITLE = {Digital Communication over Fading Channels},
PUBLISHER = {New York, NY, USA: Wiley},
YEAR = {2005},
edition = {2nd},}
%%%%%%%%%%% 2005
@BOOK{TseBook2005,
AUTHOR = {D. Tse and P. Viswanath},
TITLE = {Fundamentals of Wireless Communication},
PUBLISHER = {Cambridge University Press},
YEAR = {2005},
edition = {1st},}
%%%%%%%%% 2008
@BOOK{LiuBook2008,
AUTHOR = {K. J. R. Liu and A. K. Sadek and W. Su and A. Kwasinski},
TITLE = {Cooperative Communications and Networking},
PUBLISHER = {New York, NY: Cambridge University Press},
YEAR = {2008},
edition = {},}
%%%%%%%%% 2010
@BOOK{RappaportBook2010,
AUTHOR = {T. S. Rappaport},
TITLE = {Wireless Communications: Principles and Practice },
PUBLISHER = {Pearson},
YEAR = {2010},
edition = {2},}
%%%%%%%%%%%%
%%%%%%%%%% Thesis
@BOOK{SubadarThesis2011,
AUTHOR = {Rupaban Subadar},
TITLE = {Performance Analysis of Diversity Combining Receivers Over Hoyt, $\eta$-$\mu$ and $\kappa$-$\mu$ Fading Channels},
PUBLISHER = {Ph. D. thesis, IIT Guwahati, Assam, India},
YEAR = {2011},
}
%%%%%%%%%% Journal Papers
%%%%%%%%%%%% 1947
@ARTICLE{HoytApr1947,
author={R. S. Hoyt},
journal={Bell Syst. Tech. J.},
title={Probability functions for the modulus and angle of the normal complex variate},
year={1947},
volume={26},
number={2},
pages={318-359},
keywords={},
doi={10.1002/j.1538-7305.1947.tb01318.x},
ISSN={0005-8580},
month={Apr.},}
cover_page.tex · 1 KB
% TITLE PAGE
\begin{titlepage}
\thispagestyle{empty}
\begin{center}
{\Large \bf Write Thesis Title Here}
\end{center}
% \vspace{-2.5em}
% \begin{center}
% \textbf{COMMUNICATION SYSTEMS OVER FADING CHANNELS}
% \end{center}
\vspace{2em}
\begin{center}
\textbf{\textit{Thesis submitted to the}}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{\textit{Indian Institute of Technology Bhubaneswar}}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{\textit{For award of the degree}}
\end{center}
\vspace{-1em}
\begin{center}
\textbf{\textit{of}}
\end{center}
\vspace{-1em}
\begin{center}
\textbf{\large Doctor of Philosophy}
\end{center}
\vspace{-1em}
\begin{center}
\textbf{\textit{by}}
\end{center}
\vspace{-1em}
\begin{center}
\large{\textbf{Student Name}}
\end{center}
\vspace{-1em}
\begin{center}
Under the guidance of
\end{center}
\vspace{-1em}
\begin{center}
\textbf{Supervisor Name}
\end{center}
\vspace{-1em}
\begin{center}
\includegraphics[scale=0.3]{iitbbs}
\end{center}
\vspace{-1em}
\begin{center}
\textbf{\small SCHOOL OF ******** SCIENCES}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{\small INDIAN INSTITUTE OF TECHNOLOGY BHUBANESWAR}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{September 2018}
\end{center}
\vspace{-3em}
\begin{center}
\copyright 2018 Student Name. All rights reserved.
\end{center}
%\newpage
%\thispagestyle{empty}
\cleardoublepage
\end{titlepage}
eepic.sty · 17 KB
% eepic Version 1.1e < Dec 21, 1999 >
% Updated by Piet van Oostrum <[email protected]>
% eepic Version 1.1c < Nov 25, 1998 >
% Updated by Piet van Oostrum <[email protected]>
% eepic Version 1.1b < Febrary 7, 1988 >
% Written by Conrad Kwok
%
% Internet : [email protected]
% csnet : [email protected]
% csnet : kwok%[email protected]
% UUCP : ...!ucbvax!ucdavis!iris!kwok
%
% The macros are in public domain.
% You may distribute or modify it in any ways you like.
% Please report any bugs, enhancements, comments, suggestions, etc.
%
% This style file modify some of the commands in epic[1] and LaTeX[2] such
% that \special commands will be generated in drawing lines if approriate.
% The \special commands generated is the subset of the \specials used
% by tpic[3].
%
% [1] epic is written by Sunil Podar. Please read epic.sty for the
% copyright notice.
% [2] LaTeX is written by Leslie Lamport. Please read the book LaTeX
% [3] tpic is modified from pic by Tim Morgan
%
%% This file contains extensions of the following epic commands:
%% \dottedline \dashline \drawline
%% \jput
%%
%% It also contains extensions of the following LaTeX commands:
%% \circle \line \oval
%%
%% New commands include:
%% \Thicklines \arc \ellipse
%% \path \spline \allinethickness
%%
%% New commands for eepic 1.1
%% \blacken \whiten \shade
%% \texture \filltype{type} type=black|white|shade
%%
%% For documentation, please see the accompanying manual
%%
%% Change Log;
%% o (October 2, 88)
%% Fixed the problem of \line (\@sline). When both x and y are
%% large, it produced 'bad character code' error.
%%
%% o (January 17, 89)
%% Add commands \blacken, \whiten, \shade, \texture
%%
%% o (January 17, 89)
%% Add \filltype{xxxxx}
%% xxxxx - black, white, shade
%%
\typeout{%
Extension to Epic and LaTeX. Version 1.1e - Released Dec 21, 1999}
%
\newcount\@gphlinewidth
\newcount\@eepictcnt
\newdimen\@tempdimc
\@gphlinewidth\@wholewidth \divide\@gphlinewidth 4736
%% Redefine \thinlines, \thicklines
%% See also latex.tex
\def\thinlines{\let\@linefnt\tenln \let\@circlefnt\tencirc
\@wholewidth\fontdimen8\tenln \@halfwidth .5\@wholewidth
\@gphlinewidth\@wholewidth \divide\@gphlinewidth 4736\relax}
\def\thicklines{\let\@linefnt\tenlnw \let\@circlefnt\tencircw
\@wholewidth\fontdimen8\tenlnw \@halfwidth .5\@wholewidth
\@gphlinewidth\@wholewidth \divide\@gphlinewidth 4736
\advance\@gphlinewidth\@ne % Make the output looks better
\relax}
%%
%% To indicate whether the dot character is defined in the dotted join
%% environment or not (\@ifnodotdef)
\newif\if@nodotdef \global\@nodotdeftrue
%%
%% Redefine \dottedjoin
\def\dottedjoin{\global\@jointhemtrue \global\@joinkind=0\relax
\bgroup\@ifnextchar[{\global\@nodotdeffalse\@idottedjoin}%
{\global\@nodotdeftrue\@idottedjoin[\@empty]}}
%%----------------------------------------------------------------------
%% Redefine \jput
\long\def\jput(#1,#2)#3{\@killglue\raise#2\unitlength\hbox to \z@{\hskip
#1\unitlength #3\hss}%
\if@jointhem \if@firstpoint \gdef\x@one{#1} \gdef\y@one{#2} \global\@firstpointfalse
\else\ifcase\@joinkind
\if@nodotdef
\@spdottedline{\dotgap@join\unitlength}%
(\x@one\unitlength ,\y@one\unitlength)(#1\unitlength,#2\unitlength)
\else
\@dottedline[\dotchar@join]{\dotgap@join\unitlength}%
(\x@one\unitlength,\y@one\unitlength)(#1\unitlength,#2\unitlength)
\fi
\or\@dashline[\dashlinestretch]{\dashlen@join\unitlength}[\dotgap@join]%
(\x@one,\y@one)(#1,#2)
\else\@drawline[\drawlinestretch](\x@one,\y@one)(#1,#2)\fi
\gdef\x@one{#1}\gdef\y@one{#2}%
\fi
\fi\ignorespaces}
%%
%% Redefine \dottedline to generate special whenever possible.
\def\dottedline{\@ifnextchar [{\@idottedline}{\@ispdottedline}}
%% Similar to \@idottedline but it generate \special
\def\@ispdottedline#1(#2,#3){\@ifnextchar (%
{\@iispdottedline{#1}(#2,#3)}{\relax}}
\def\@iispdottedline#1(#2,#3)(#4,#5){\@spdottedline{#1\unitlength}%
(#2\unitlength,#3\unitlength)(#4\unitlength,#5\unitlength)%
\@ispdottedline{#1}(#4,#5)}
%
\def\@spdottedline#1(#2,#3)(#4,#5){%
\@killglue % This line added by Piet van Oostrum, Dec 21, 1999.
\@tempcnta \@gphlinewidth\relax
\advance\@tempcnta by 2 % solely for better output
\special{pn \the\@tempcnta}%
\@tempdimc=#2\relax
\@tempcnta \@tempdimc\relax \advance\@tempcnta 2368 \divide\@tempcnta 4736
\@tempdimc=#3\relax
\@tempcntb -\@tempdimc\relax\advance\@tempcntb -2368 \divide\@tempcntb 4736
\@paspecial{\the\@tempcnta}{\the\@tempcntb}%
\@tempdimc=#4\relax
\@tempcnta \@tempdimc\relax \advance\@tempcnta 2368 \divide\@tempcnta 4736
\@tempdimc=#5\relax
\@tempcntb -\@tempdimc\relax\advance\@tempcntb -2368 \divide\@tempcntb 4736
\@paspecial{\the\@tempcnta}{\the\@tempcntb}%
\@tempdimc=#1\relax
%%
%% Generate the pen width in terms of inch with 3 decimal digit.
\@tempcnta \@tempdimc\relax \advance\@tempcnta 2368 \divide\@tempcnta 4736
%% \@tempcnta contain the pen width in terms of thousandth of a inch
%% Then it is converted back to inch. I know the way I use is dumb but
%% I cannot think of any better method
\@tempcntb \@tempcnta\relax \divide\@tempcntb 1000
\multiply \@tempcntb 1000 \advance\@tempcnta -\@tempcntb
\divide\@tempcntb 1000
\ifnum\@tempcnta < 10
\special{dt \the\@tempcntb.00\the\@tempcnta}%
\else\ifnum\@tempcnta < 100
\special{dt \the\@tempcntb.0\the\@tempcnta}%
\else
\special{dt \the\@tempcntb.\the\@tempcnta}%
\fi\fi
\ignorespaces
}
%
\def\@iiidashline[#1]#2[#3](#4,#5)(#6,#7){%
\@dashline[#1]{#2\unitlength}[#3](#4,#5)(#6,#7)%
\@iidashline[#1]{#2}[#3](#6,#7)}
%
%% Redefine \@dashline
\long\def\@dashline[#1]#2[#3](#4,#5)(#6,#7){{%
\x@diff=#6\unitlength \advance\x@diff by -#4\unitlength
\y@diff=#7\unitlength \advance\y@diff by -#5\unitlength
%% correction to get actual width since the dash-length as taken in arguement
%% is the center-to-center of the end-points.
\@tempdima=#2\relax \advance\@tempdima -\@wholewidth
\sqrtandstuff{\x@diff}{\y@diff}{\@tempdima}%
\ifnum\num@segments <3 \num@segments=3\fi% min number of dashes I can plot
% is 2, 1 at either end, thus min num@segments is 3 (including 'empty dash').
\@tempdima=\x@diff \@tempdimb=\y@diff
\divide\@tempdimb by\num@segments
\divide\@tempdima by\num@segments
%% ugly if-then-else. If optional dotgap specified, then use it otherwise
%% make a solid dash.
{\ifx#3\@empty \relax
\ifdim\@tempdima < 0pt \x@diff=-\@tempdima\else\x@diff=\@tempdima\fi
\ifdim\@tempdimb < 0pt \y@diff=-\@tempdimb\else\y@diff=\@tempdimb\fi
\global\setbox\@dotbox\hbox{%
\@absspdrawline(0pt,0pt)(\@tempdima,\@tempdimb)}%
\else\global\setbox\@dotbox\hbox{%
\@spdottedline{#3\unitlength}(0pt,0pt)(\@tempdima,\@tempdimb)}%
\fi}%
\advance\x@diff by -\@tempdima % both have same sign
\advance\y@diff by -\@tempdimb
%
%%here we correct the number of dashes to be put by reducing them
%%appropriately. (num@segments*\@wholewidth) is in some way the slack we
%%have,and division by dash-length gives the reduction. reduction =
%%(2*num@segments*\@wholewidth)/dash-length
%% (num@segments includes empty ones)
\@tempdima=\num@segments\@wholewidth \@tempdima=2\@tempdima
\@tempcnta\@tempdima\relax \@tempdima=#2\relax \@tempdimb=0.5\@tempdima
\@tempcntb\@tempdimb\relax \advance\@tempcnta by \@tempcntb % round-off error
\divide\@tempcnta by\@tempdima \advance\num@segments by -\@tempcnta
%
\ifnum #1=0 \relax\else\ifnum #1 < -100
\typeout{***dashline: reduction > -100 percent implies blankness!***}
\else\num@segmentsi=#1 \advance\num@segmentsi by 100
\multiply\num@segments by\num@segmentsi \divide\num@segments by 100
\fi\fi
%
\divide\num@segments by 2 % earlier num@segments included 'empty dashes' too.
\ifnum\num@segments >0 % if =0 then don't divide => \x@diff & \y@diff
\divide\x@diff by\num@segments% remain same.
\divide\y@diff by\num@segments
\advance\num@segments by\@ne %for the last segment for which I subtracted
%\@tempdima & \@tempdimb from \x@diff & \y@diff
\else\num@segments=2 % one at each end.
\fi
%%\typeout{num@segments finally = \the\num@segments}
%% equiv to \multiput(#4,#5)(\x@diff,\y@diff){\num@segments}{\copy\@dotbox}
%% with arguements in absolute dimensions.
\@xdim=#4\unitlength \@ydim=#5\unitlength
\@killglue
\loop \ifnum\num@segments > 0
\unskip\raise\@ydim\hbox to\z@{\hskip\@xdim \copy\@dotbox\hss}%
\advance\num@segments \m@ne\advance\@xdim\x@diff\advance\@ydim\y@diff%
\repeat}%
\ignorespaces}
%% redefine \@drawline
%
\def\@drawline[#1](#2,#3)(#4,#5){{%
\@drawitfalse\@horvlinefalse
\ifnum#1 <0 \relax\else\@horvlinetrue\fi
\if@horvline
\@spdrawline(#2,#3)(#4,#5)
\else\@drawittrue\fi
%%-------------------------------
\if@drawit
\ifnum #1=0 \relax \else\ifnum #1 < -99
\typeout{***drawline: reduction <= -100 percent implies blankness!***}%
\else\num@segmentsi=#1 \advance\num@segmentsi by 50
\multiply\num@segmentsi 2
\fi\fi
\@dashline[\num@segmentsi]{10pt}[\@empty](#2,#3)(#4,#5)
\fi}\ignorespaces}% for \if@drawit
%
\def\@spdrawline(#1,#2)(#3,#4){%
\@absspdrawline(#1\unitlength,#2\unitlength)(#3\unitlength,#4\unitlength)
\ignorespaces
}
\def\@absspdrawline(#1,#2)(#3,#4){%
\@killglue % This line added by Piet van Oostrum, Dec 21, 1999.
\special{pn \the\@gphlinewidth}%
\@tempdimc=#1\relax
\@tempcnta \@tempdimc\relax \advance\@tempcnta 2368 \divide\@tempcnta 4736
\@tempdimc=#2\relax
\@tempcntb -\@tempdimc\relax \advance\@tempcntb -2368 \divide\@tempcntb 4736
\@paspecial{\the\@tempcnta}{\the\@tempcntb}%
\@tempdimc=#3\relax
\@tempcnta\@tempdimc\relax \advance\@tempcnta 2368 \divide\@tempcnta 4736
\@tempdimc=#4\relax
\@tempcntb -\@tempdimc\relax \advance\@tempcntb -2368 \divide\@tempcntb 4736
\@paspecial{\the\@tempcnta}{\the\@tempcntb}%
\special{fp}%
\ignorespaces
}
%%----------------------------------------------------------------------
\def\@paspecial#1#2{%
\special{pa #1 #2}%
}
%%
%% Functions below modify the LaTeX commands and some additional commands
%% are not supported by LaTeX nor epic such as ThickLines and arc.
%%
%% The macros are for use with LaTeX picture environment
%% By including the macro file, you can draw
%% 1) \line in any slope
%% 2) \circle with any radius
%% 3) \ellipse with any x-axis and y-axis length
%% 4) Circular \arc by giving starting and ending angle (in radius)
%%
%% Furthermore you may draw lines in any thickness.
%%
%%
%% Redefine \thinlines, \thicklines and define \Thickline
%% See also latex.tex
\def\Thicklines{\let\@linefnt\tenlnw \let\@circlefnt\tencircw
\@wholewidth\fontdimen8\tenlnw \@wholewidth 1.5\@wholewidth
\@halfwidth .5\@wholewidth
\@gphlinewidth\@wholewidth \divide\@gphlinewidth 4736\relax}
%%
%% Generate the \special command for drawing arc
\def\@circlespecial#1#2#3#4{%
\special{pn \the\@gphlinewidth}%
\special{ar 0 0 #1 #2 #3 #4}
}
%%
%% Command for drawing an arc. Elliptical arc command can be generated
%% but all iptex program I saw so far does not support that.
\def\@arc#1#2#3#4{%
%% convert TeX dimension to length in terms thousandth of an inch
\@tempdima #1\unitlength
\@tempdimb #2\unitlength
\@tempcnta\@tempdima \advance\@tempcnta 4736 \divide\@tempcnta 9473
\@tempcntb\@tempdimb \advance\@tempcntb 4736 \divide\@tempcntb 9473
\setbox\@tempboxa\hbox{%
\@circlespecial{\the\@tempcnta}{\the\@tempcntb}{#3}{#4}}%
\wd\@tempboxa\z@ \box\@tempboxa}
%%
%% Command for drawing Circle and Ellipse in terms of \@arc
%% replace original \circle
\def\circle{%
\@ifstar{\copy\@filltype\@circle}{\@circle}}
\def\@circle#1{\@arc{#1}{#1}{0}{6.2832}}
\def\ellipse{%
\@ifstar{\copy\@filltype\@ellipse}{\@ellipse}}
\def\@ellipse#1#2{{\@arc{#1}{#2}{0}{6.2832}}}
\def\arc#1#2#3{\@arc{#1}{#1}{#2}{#3}}
%%
%% Generate \special commands for drawing line
\def\@linespecial#1#2{%
\special{pn \the\@gphlinewidth}%
\special{pa 0 0}%
\special{pa #1 #2}%
\special{fp}%
}
%% Replace original \line. Only change is to call \@ssline instead
%% of \@sline. For description, see latex.tex
\def\line(#1,#2)#3{\@xarg #1\relax \@yarg #2\relax
\@linelen=#3\unitlength
\ifnum\@xarg =0 \@vline
\else \ifnum\@yarg =0 \@hline \else \@ssline\fi
\fi}
%%
\def\@ssline{%
\ifnum\@xarg< 0
\@negargtrue \@xarg -\@xarg \@tempdima -\@linelen
\else
\@negargfalse \@tempdima\@linelen
\fi
%% truncation is used in arithmetic
\@tempcnta\@linelen \divide\@tempcnta 4736
\@yyarg -\@yarg \multiply\@yyarg \@tempcnta \divide\@yyarg\@xarg
\if@negarg
\@tempcnta -\@tempcnta
\fi
\setbox\@linechar\hbox{\@linespecial{\the\@tempcnta}{\the\@yyarg}}%
\wd\@linechar\@tempdima
\@clnht\@linelen
\multiply\@clnht\@yarg
\divide\@clnht\@xarg
\ifnum\@yarg< 0
\@clnht -\@clnht
\ht\@linechar\z@ \dp\@linechar\@clnht
\else
\ht\@linechar\@clnht \dp\@linechar\z@
\fi
\box\@linechar
}
%%
%% Replace original \@sline
\def\@sline{%
\@ssline
%% Codes below (till end of the command) is only necessary
%% when used with \@svector
\if@negarg
\@yyarg -\@yarg
\else
\@yyarg \@yarg
\fi
\setbox\@linechar\hbox{\@linefnt\@getlinechar(\@xarg,\@yyarg)}%
\ifnum\@yarg> 0
\let\@upordown\raise
\advance\@clnht -\ht\@linechar
\else
\let\@upordown\lower
\fi
\if@negarg \kern\wd\@linechar \fi
}
%%
\def\spline(#1,#2){%
\@killglue % This line added by Piet van Oostrum, Dec 21, 1999.
\special{pn \the\@gphlinewidth}%
\@spline(#1,#2)%
}
\def\@spline(#1,#2){%
\@tempdima #1\unitlength
\@tempdimb #2\unitlength
\@tempcnta \@tempdima \advance\@tempcnta 2368 \divide\@tempcnta 4736
\@tempcntb -\@tempdimb \advance\@tempcntb -2368 \divide\@tempcntb 4736
\@paspecial{\the\@tempcnta}{\the\@tempcntb}%
\@ifnextchar ({\@spline}{\special{sp}}%
}
\def\path(#1,#2){%
\@killglue % This line added by Piet van Oostrum, Dec 20, 1999.
\special{pn \the\@gphlinewidth}%
\@path(#1,#2)%
}
\def\@path(#1,#2){%
\@tempdima #1\unitlength
\@tempdimb #2\unitlength
\@tempcnta \@tempdima \advance\@tempcnta 2368 \divide\@tempcnta 4736
\@tempcntb -\@tempdimb \advance\@tempcntb -2368 \divide\@tempcntb 4736
\@paspecial{\the\@tempcnta}{\the\@tempcntb}%
\@ifnextchar ({\@path}{\special{fp}}%
}
%%%%%%%%%% Beginning of \oval %%%%%%%%%%%%%%%
\newdimen\maxovaldiam \maxovaldiam 40pt\relax
\def\@oval(#1,#2)[#3]{\begingroup\boxmaxdepth \maxdimen
\@ovttrue \@ovbtrue \@ovltrue \@ovrtrue
\@tfor\@tempa :=#3\do{\csname @ov\@tempa false\endcsname}\@ovxx
#1\unitlength \@ovyy #2\unitlength
\@tempdimb \ifdim \@ovyy >\@ovxx \@ovxx\else \@ovyy \fi
\@ovro \ifdim \@tempdimb>\maxovaldiam \maxovaldiam\else\@tempdimb\fi\relax
\divide \@ovro \tw@
\@ovdx\@ovxx \divide\@ovdx \tw@
\@ovdy\@ovyy \divide\@ovdy \tw@
\setbox\@tempboxa \hbox{%
\if@ovr \@ovverta\fi
\if@ovl \kern \@ovxx \@ovvertb\kern -\@ovxx \fi
\if@ovt \@ovhorz \kern -\@ovxx \fi
\if@ovb \raise \@ovyy \@ovhorz \fi}% Update by Piet van Oostrum (% added)
\ht\@tempboxa\z@ \dp\@tempboxa\z@
\@put{-\@ovdx}{-\@ovdy}{\box\@tempboxa}%
\endgroup}
\def\@qcirc#1#2#3#4{%
\special{pn \the\@gphlinewidth}%
\@eepictcnt \@gphlinewidth \divide\@eepictcnt 2
\@tempcnta #1
\advance\@tempcnta 2368 \divide\@tempcnta 4736
\advance\@tempcnta\@eepictcnt
\@tempcntb #2 \divide\@tempcntb 4736 \advance\@tempcntb 2
\hbox{%
\@qcircspecial{\the\@tempcnta}{-\the\@eepictcnt}{\the\@tempcntb}{#3}{#4}}%
}
\def\@qcircspecial#1#2#3#4#5{\special{ar #1 #2 #3 #3 #4 #5}}
\def\@ovverta{\vbox to \@ovyy{%
\if@ovb
\kern \@ovro
\@qcirc{\@ovro}{\@ovro}{3.1416}{4.7124}\nointerlineskip
\else
\kern \@ovdy
\fi
\leaders\vrule width \@wholewidth\vfil \nointerlineskip
\if@ovt
\@qcirc{\@ovro}{\@ovro}{1.5708}{3.1416}\nointerlineskip
\kern \@ovro
\else
\kern \@ovdy
\fi
}\kern -\@wholewidth}
\def\@ovvertb{\vbox to \@ovyy{%
\if@ovb
\kern \@ovro
\@qcirc{-\@ovro}{\@ovro}{4.6124}{6.2832}\nointerlineskip
\else
\kern \@ovdy
\fi
\leaders\vrule width \@wholewidth\vfil \nointerlineskip
\if@ovt
\@qcirc{-\@ovro}{\@ovro}{0}{1.6708}\nointerlineskip
\kern \@ovro
\else
\kern \@ovdy
\fi
}\kern -\@wholewidth}
\def\@ovhorz{\hbox to \@ovxx{%
\if@ovr \kern \@ovro\else \kern \@ovdx \fi
\leaders \hrule height \@wholewidth \hfil
\if@ovl \kern \@ovro\else \kern \@ovdx \fi
}}
%%%%%%%%% End of \oval %%%%%%%%%%%%%%
\def\allinethickness#1{\let\@linefnt\tenlnw \let\@circlefnt\tencircw
\@wholewidth #1 \@halfwidth .5\@wholewidth
\@gphlinewidth\@wholewidth \divide\@gphlinewidth 4736\relax}
\def\blacken{\special{bk}}
\def\whiten{\special{wh}}
\def\shade{\special{sh}}
\def\texture#1{\special{tx #1}\ignorespaces}
%%
\newbox\@filltype
\setbox\@filltype\hbox{\special{bk}}
\def\filltype#1{\@nameuse{ft@#1}}
\def\ft@black{\setbox\@filltype\hbox{\special{bk}}}
\def\ft@white{\setbox\@filltype\hbox{\special{wh}}}
\def\ft@shade{\setbox\@filltype\hbox{\special{sh}}}
%%
epic.sty · 25 KB
\typeout{%
Enhancements to Picture Environment. Version 1.2 - Released June 1, 1986}
%----------------------------------------------------------------------
% Copyright (C) podar@sbcs (Sunil Podar) July 14,1986.
% You may use this file in whatever way you wish. You are requested to
% leave this notice intact, and report any bugs, enhancements, comments,
% suggestions, etc. to:
% USmail: Sunil Podar,Dept. of Computer Science,SUNY at Stony Brook,NY 11794.
% CSNET: [email protected]
% ARPA: podar%[email protected]
% UUCP: {allegra, hocsd, philabs, ogcvax}!sbcs!podar
%----------------------------------------------------------------------
% This file contains implementation of:
% \multiputlist \matrixput \grid \picsquare
% \dottedline \dashline \drawline \jput
% \putfile
% Environments: dottedjoin, dashjoin and drawjoin
%
% For documentation, see the accompanying manual.
%----------------------------------------------------------------------
% usage: \multiputlist(x,y)(delta-x,delta-y)[tbrl]{item1,item2,item3,.....}
% \lop and \lopoff taken from TeXbook.
%----------------------------------------------------------------------
\def\lop#1\to#2{\expandafter\lopoff#1\lopoff#1#2}
\long\def\lopoff,#1,#2\lopoff#3#4{\def#4{#1}\def#3{,#2}}
\def\@@mlistempty{,}
\newif\iflistnonempty
\def\multiputlist(#1,#2)(#3,#4){\@ifnextchar
[{\@imultiputlist(#1,#2)(#3,#4)}{\@imultiputlist(#1,#2)(#3,#4)[]}}
\long\def\@imultiputlist(#1,#2)(#3,#4)[#5]#6{{%
\@xdim=#1\unitlength \@ydim=#2\unitlength
\listnonemptytrue \def\@@mlist{,#6,} % need this for end condition
\loop
\lop\@@mlist\to\@@firstoflist
\@killglue\raise\@ydim\hbox to\z@{\hskip
\@xdim\@imakepicbox(0,0)[#5]{\@@firstoflist}\hss}
\advance\@xdim #3\unitlength\advance\@ydim #4\unitlength
\ifx\@@mlist\@@mlistempty \listnonemptyfalse\fi
\iflistnonempty
\repeat\relax
\ignorespaces}}
%----------------------------------------------------------------------
% two-dimensional version of \multiput
% \matrixput(0,0)(20,0){5}(0,20){3}{\circle{2}}
%----------------------------------------------------------------------
\newcount\@@multicnt
\def\matrixput(#1,#2)(#3,#4)#5(#6,#7)#8#9{%
\ifnum#5>#8\@matrixput(#1,#2)(#3,#4){#5}(#6,#7){#8}{#9}%
\else\@matrixput(#1,#2)(#6,#7){#8}(#3,#4){#5}{#9}\fi}
%% here #5 >= #8
\long\def\@matrixput(#1,#2)(#3,#4)#5(#6,#7)#8#9{{\@killglue%
\@multicnt=#5\relax\@@multicnt=#8\relax%
\@xdim=0pt%
\@ydim=0pt%
\setbox\@tempboxa\hbox{\@whilenum \@multicnt > 0\do {%
%%\typeout{\the\@multicnt, \the\@@multicnt}%
\raise\@ydim\hbox to \z@{\hskip\@xdim #9\hss}%
\advance\@multicnt \m@ne%
\advance\@xdim #3\unitlength\advance\@ydim #4\unitlength}}%
\@xdim=#1\unitlength%
\@ydim=#2\unitlength%
\@whilenum \@@multicnt > 0\do {%
\raise\@ydim\hbox to \z@{\hskip\@xdim \copy\@tempboxa\hss}%
\advance\@@multicnt \m@ne%
\advance\@xdim #6\unitlength\advance\@ydim #7\unitlength}%
\ignorespaces}}
%----------------------------------------------------------------------
%\grid(wd,ht)(delta-wd,delta-ht)[initial-X-integer,initial-Y-integer]
% example: 1. \put(0,0){\grid(95,100)(9.5,10)}
% 2. \put(0,0){\grid(100,100)(10,5)[-10,0]}
% or \put(0,0){\tiny \grid(100,100)(5,5)[0,0]}%numbers in \tiny font
%----------------------------------------------------------------------
\newcount\d@lta
\newdimen\@delta
\newdimen\@@delta
\newcount\@gridcnt
\def\grid(#1,#2)(#3,#4){\@ifnextchar [{\@igrid(#1,#2)(#3,#4)}%
{\@igrid(#1,#2)(#3,#4)[@,@]}}
\long\def\@igrid(#1,#2)(#3,#4)[#5,#6]{%
\makebox(#1,#2){%
\@delta=#1pt\@@delta=#3pt\divide\@delta \@@delta\d@lta=\@delta%
\advance\d@lta \@ne\relax\message{grid=\the\d@lta\space x}%
%% copied the definition of \line(0,1){#2} for some efficiency!.
\multiput(0,0)(#3,0){\d@lta}{\hbox to\z@{\hskip -\@halfwidth \vrule
\@width \@wholewidth \@height #2\unitlength \@depth \z@\hss}}%
\ifx#5@\relax\else%
\global\@gridcnt=#5%
\multiput(0,0)(#3,0){\d@lta}{%
\makebox(0,-2)[t]{\number\@gridcnt\global\advance\@gridcnt by #3}}%
\global\@gridcnt=#5%
\multiput(0,#2)(#3,0){\d@lta}{\makebox(0,0)[b]{\number\@gridcnt\vspace{2mm}%
\global\advance\@gridcnt by #3}}%
\fi%
\@delta=#2pt\@@delta=#4pt\divide\@delta \@@delta\d@lta=\@delta%
\advance\d@lta \@ne\relax\message{\the\d@lta . }%
%% copied the definition of \line(1,0){#1} for some efficiency!.
\multiput(0,0)(0,#4){\d@lta}{\vrule \@height \@halfwidth \@depth \@halfwidth
\@width #1\unitlength}%
\ifx#6@\relax\else
\global\@gridcnt=#6%
\multiput(0,0)(0,#4){\d@lta}{%
\makebox(0,0)[r]{\number\@gridcnt\ \global\advance\@gridcnt by #4}}%
\global\@gridcnt=#6%
\multiput(#1,0)(0,#4){\d@lta}{%
\makebox(0,0)[l]{\ \number\@gridcnt\global\advance\@gridcnt by #4}}%
\fi}}
%----------------------------------------------------------------------
% \picsquare is a centered square of dimensions governed by \thinlines,
% \thicklines or \linethickness declarations.
\def\picsquare{\hskip -0.5\@wholewidth%
\vrule height \@halfwidth depth \@halfwidth width \@wholewidth}
%
% just a square dot with reference point at bottom-left
\def\picsquare@bl{\vrule height \@wholewidth depth \z@ width \@wholewidth}
%----------------------------------------------------------------------
% \begin{dottedjoin}{interdot-gap in units}
% .....
% \end{dottedjoin}
% \begin{dashjoin}{dash-length in units}{interdotgap in each dash}
% .....
% \end{dashjoin}
% \begin{drawjoin}
% .....
% \end{drawjoin}
% \jput(x,y){character}
% \dottedline[opt. dotcharacter]{dotgap in units}(x1,y1)(x2,y2)...(xN,yN)
% \dashline[#]{dash-length}[opt. dotgap](x1,y1)(x2,y2)...(xN,yN)
% \drawline[#](x1,y1)(x2,y2)...(xN,yN)
%----------------------------------------------------------------------
% definitions for *join environment. had to do all this mess because of
% optional arguments.
%----------------------------------------------------------------------
\newif\if@jointhem \global\@jointhemfalse
\newif\if@firstpoint \global\@firstpointtrue
\newcount\@joinkind
%\newenvironment{dottedjoin}[1]%[opt char]{dotgap}
%{\global\@jointhemtrue \gdef\dotgap@join{#1}\global\@joinkind=0\relax}%
%{\global\@jointhemfalse \global\@firstpointtrue}
%----------------------------------------------------------------------
\def\dottedjoin{\global\@jointhemtrue \global\@joinkind=0\relax
\bgroup\@ifnextchar[{\@idottedjoin}{\@idottedjoin[\picsquare@bl]}}
\def\@idottedjoin[#1]#2{\gdef\dotchar@join{#1}\gdef\dotgap@join{#2}}
\def\enddottedjoin{\global\@jointhemfalse \global\@firstpointtrue\egroup}
%----------------------------------------------------------------------
\def\dashjoin{\global\@jointhemtrue \global\@joinkind=1\relax
\bgroup\@ifnextchar[{\@idashjoin}{\@idashjoin[\dashlinestretch]}}
\def\@idashjoin[#1]#2{\edef\dashlinestretch{#1}\gdef\dashlen@join{#2}%
\@ifnextchar[{\@iidashjoin}{\gdef\dotgap@join{}}}
\def\@iidashjoin[#1]{\gdef\dotgap@join{#1}}
\let\enddashjoin\enddottedjoin
%----------------------------------------------------------------------
\def\drawjoin{\global\@jointhemtrue \global\@joinkind=2\relax
\bgroup\@ifnextchar[{\@idrawjoin}{}}
\def\@idrawjoin[#1]{\def\drawlinestretch{#1}}
\let\enddrawjoin\enddottedjoin
%----------------------------------------------------------------------
%% this is equiv to \put(x,y){#1} when not in {dot*join} environment.
\long\def\jput(#1,#2)#3{{\@killglue\raise#2\unitlength\hbox to \z@{\hskip
#1\unitlength #3\hss}\ignorespaces}
\if@jointhem
\if@firstpoint \gdef\x@one{#1} \gdef\y@one{#2} \global\@firstpointfalse
\else\ifcase\@joinkind
\@dottedline[\dotchar@join]{\dotgap@join\unitlength}%
(\x@one\unitlength,\y@one\unitlength)(#1\unitlength,#2\unitlength)
\or\@dashline[\dashlinestretch]{\dashlen@join}[\dotgap@join]%
(\x@one,\y@one)(#1,#2)
\else\@drawline[\drawlinestretch](\x@one,\y@one)(#1,#2)\fi
\gdef\x@one{#1} \gdef\y@one{#2}
\fi
\fi}
%----------------------------------------------------------------------
\newdimen\@dotgap
\newdimen\@ddotgap
\newcount\@x@diff
\newcount\@y@diff
\newdimen\x@diff
\newdimen\y@diff
\newbox\@dotbox
\newcount\num@segments
\newcount\num@segmentsi
\newif\ifsqrt@done
%% from sqrtandstuff func basically need \num@segments.
%% given a deltax, deltay and dotgap, it calculates \num@segments = number of
%% segments along the hypotenuse. used by \dottedline & \dashline.
%% It finishes quickly if any of deltax or deltay are zero or close to zero.
\def\sqrtandstuff#1#2#3{
\ifdim #1 <0pt \@x@diff= -#1 \else\@x@diff=#1\fi
\ifdim #2 <0pt \@y@diff= -#2 \else\@y@diff=#2\fi
%% @diff's will be positive and diff's will retain their sign.
\@dotgap=#3 \divide\@dotgap \tw@
\advance\@x@diff \@dotgap \advance\@y@diff \@dotgap% for round-off errors
\@dotgap=#3
\divide\@x@diff \@dotgap \divide\@y@diff \@dotgap
\sqrt@donefalse
\ifnum\@x@diff < 2
\ifnum\@y@diff < 2 \num@segments=\@x@diff \advance\num@segments \@y@diff
\sqrt@donetrue
\else\num@segments=\@y@diff \sqrt@donetrue\fi
\else\ifnum\@y@diff < 2 \num@segments=\@x@diff \sqrt@donetrue\fi
\fi
\ifsqrt@done \ifnum\num@segments=\z@ \num@segments=\@ne\fi\relax
\else \ifnum\@y@diff >\@x@diff
\@tempcnta=\@x@diff \@x@diff=\@y@diff \@y@diff=\@tempcnta
\fi %exchange @x@diff & @y@diff, so now @x@diff > @y@diff
\num@segments=\@y@diff
\multiply\num@segments \num@segments
\multiply\num@segments by 457
\divide\num@segments \@x@diff
\advance\num@segments by 750 % for round-off, going to divide by 1000.
\divide\num@segments \@m
\advance\num@segments \@x@diff
%num@segments = @x@diff + (0.457*sqr(@y@diff)/@x@diff)
\fi}
%----------------------------------------------------------------------
% \dottedline[opt. char]{interdot gap in units}(x1,y1)(x2,y2)....(xN,yN)
%----------------------------------------------------------------------
%% Used the following construction earlier but that results in box memory
%% full much too soon although it works perfectly.
%% \setbox\@dotbox\vbox to\z@{\vss \hbox to\z@{\hss #1\hss}\vss}\relax}
%% The cenetering of characters is achieved by substracting half the ht, wd
%% of character from the (x,y) coordinates where they are to be put. We
%% chose to use a macro for the ``dot'' instead of \copy\box to save memory
%% at the expense of extra cpu, since memory becomes an issue very soon.
%% \picsquare is already centered, whereas other characters, except \circle,
%% will not be cenetered, hence to handle them all in a similar fashion,
%% used \picsquare@bl.
%
% kind of tail recursion.
\def\dottedline{\@ifnextchar [{\@idottedline}{\@idottedline[\picsquare@bl]}}
\def\@idottedline[#1]#2(#3,#4){\@ifnextchar (%
{\@iidottedline[#1]{#2}(#3,#4)}{\relax}}
\def\@iidottedline[#1]#2(#3,#4)(#5,#6){\@dottedline[#1]{#2\unitlength}%
(#3\unitlength,#4\unitlength)(#5\unitlength,#6\unitlength)%
\@idottedline[#1]{#2}(#5,#6)}
%
%% user not supposed to use this directly. arguments in absolute dimensions.
%% need to pass absolute dimens here because dashline calls dottedline and
%% can supply only absolute dimensions.
\long\def\@dottedline[#1]#2(#3,#4)(#5,#6){{%
\x@diff=#5\relax\advance\x@diff by -#3\relax
\y@diff=#6\relax\advance\y@diff by -#4\relax
\sqrtandstuff{\x@diff}{\y@diff}{#2}
\divide\x@diff \num@segments
\divide\y@diff \num@segments
\advance\num@segments \@ne % to put the last point at destination.
%%\typeout{num@segments= \the\num@segments}
\setbox\@dotbox\hbox{#1}% just to get the dimensions of the character.
\@xdim=#3 \@ydim=#4
\ifdim\ht\@dotbox >\z@% otherwise its a circle.
\advance\@xdim -0.5\wd\@dotbox
\advance\@ydim -0.5\ht\@dotbox
\advance\@ydim .5\dp\@dotbox\fi
%%circle's have a ht=0, this is one way I could think of to catch circles.
%%following loop is equiv to
%%\multiput(\@xdim,\@ydim)(\x@diff,\y@diff){\num@segments}{#1}
%%with arguments in absolute dimensions.
\@killglue
\loop \ifnum\num@segments > 0
\unskip\raise\@ydim\hbox to\z@{\hskip\@xdim #1\hss}%
\advance\num@segments \m@ne\advance\@xdim\x@diff\advance\@ydim\y@diff%
\repeat
\ignorespaces}}
%----------------------------------------------------------------------
% \dashline[#]{dash-length}[optional dotgap](x1,y1)(x2,y2)...(xN,yN)
% The minimum # of dashes put is 2, one at either end point; dash-length is
% reduced accordingly if necessary. Also have to some dirty work to account
% for stretch & shrink.
% \renewcommand{\dashlinestretch}{-50} %ONLY INTEGERS PERMITTED.
%----------------------------------------------------------------------
\def\dashlinestretch{0} %well, could have used a counter.
\def\dashline{\@ifnextchar [{\@idashline}{\@idashline[\dashlinestretch]}}
\def\@idashline[#1]#2{\@ifnextchar [{\@iidashline[#1]{#2}}%
{\@iidashline[#1]{#2}[\@empty]}} %\@empty needed-- later checked with \ifx
\def\@iidashline[#1]#2[#3](#4,#5){\@ifnextchar (%
{\@iiidashline[#1]{#2}[#3](#4,#5)}{\relax}}
%
\def\@iiidashline[#1]#2[#3](#4,#5)(#6,#7){%
\@dashline[#1]{#2}[#3](#4,#5)(#6,#7)%
\@iidashline[#1]{#2}[#3](#6,#7)}
%
\long\def\@dashline[#1]#2[#3](#4,#5)(#6,#7){{%
\x@diff=#6\unitlength \advance\x@diff by -#4\unitlength
\y@diff=#7\unitlength \advance\y@diff by -#5\unitlength
%% correction to get actual width since the dash-length as taken in arguement
%% is the center-to-center of the end-points.
\@tempdima=#2\unitlength \advance\@tempdima -\@wholewidth
\sqrtandstuff{\x@diff}{\y@diff}{\@tempdima}
\ifnum\num@segments <3 \num@segments=3\fi% min number of dashes I can plot
% is 2, 1 at either end, thus min num@segments is 3 (including 'empty dash').
\@tempdima=\x@diff \@tempdimb=\y@diff
\divide\@tempdimb by\num@segments
\divide\@tempdima by\num@segments
%% ugly if-then-else. If optional dotgap specified, then use it otherwise
%% make a solid looking dash.
{\ifx#3\@empty \relax
\ifdim\@tempdima < 0pt \x@diff=-\@tempdima\else\x@diff=\@tempdima\fi
\ifdim\@tempdimb < 0pt \y@diff=-\@tempdimb\else\y@diff=\@tempdimb\fi
\ifdim\x@diff < 0.3pt %it's a vertical dashline
\ifdim\@tempdimb > 0pt
\global\setbox\@dotbox\hbox{\hskip -\@halfwidth \vrule
\@width \@wholewidth \@height \@tempdimb}
\else\global\setbox\@dotbox\hbox{\hskip -\@halfwidth \vrule
\@width \@wholewidth \@height\z@ \@depth -\@tempdimb}\fi
\else\ifdim\y@diff < 0.3pt %it's a horizontal dashline
\ifdim\@tempdima >0pt
\global\setbox\@dotbox\hbox{\vrule \@height \@halfwidth
\@depth \@halfwidth \@width \@tempdima}
\else\global\setbox\@dotbox\hbox{\hskip \@tempdima
\vrule \@height \@halfwidth \@depth \@halfwidth
\@width -\@tempdima \hskip \@tempdima}\fi
\else\global\setbox\@dotbox\hbox{%
\@dottedline[\picsquare]{0.98\@wholewidth}(0pt,0pt)(\@tempdima,\@tempdimb)}
\fi\fi
\else\global\setbox\@dotbox\hbox{%
\@dottedline[\picsquare]{#3\unitlength}(0pt,0pt)(\@tempdima,\@tempdimb)}
\fi}
\advance\x@diff by -\@tempdima % both have same sign
\advance\y@diff by -\@tempdimb
%
%%here we correct the number of dashes to be put by reducing them
%%appropriately. (num@segments*\@wholewidth) is in some way the slack we
%%have,and division by dash-length gives the reduction. reduction =
%%(2*num@segments*\@wholewidth)/dash-length
%% (num@segments includes empty ones)
\@tempdima=\num@segments\@wholewidth \@tempdima=2\@tempdima
\@tempcnta=\@tempdima \@tempdima=#2\unitlength \@tempdimb=0.5\@tempdima
\@tempcntb=\@tempdimb \advance\@tempcnta by \@tempcntb % round-off error
\divide\@tempcnta by\@tempdima \advance\num@segments by -\@tempcnta
%
\ifnum #1=0 \relax\else\ifnum #1 < -100
\typeout{***dashline: reduction > -100 percent implies blankness!***}
\else\num@segmentsi=#1 \advance\num@segmentsi by 100
\multiply\num@segments by\num@segmentsi \divide\num@segments by 100
\fi\fi
%
\divide\num@segments by 2 % earlier num@segments included 'empty dashes' too.
\ifnum\num@segments >0 % if =0 then don't divide => \x@diff & \y@diff
\divide\x@diff by\num@segments% remain same.
\divide\y@diff by\num@segments
\advance\num@segments by\@ne %for the last segment for which I subtracted
%\@tempdima & \@tempdimb from \x@diff & \y@diff
\else\num@segments=2 % one at each end.
\fi
%%\typeout{num@segments finally = \the\num@segments}
%% equiv to \multiput(#4,#5)(\x@diff,\y@diff){\num@segments}{\copy\@dotbox}
%% with arguements in absolute dimensions.
\@xdim=#4\unitlength \@ydim=#5\unitlength
\@killglue
\loop \ifnum\num@segments > 0
\unskip\raise\@ydim\hbox to\z@{\hskip\@xdim \copy\@dotbox\hss}%
\advance\num@segments \m@ne\advance\@xdim\x@diff\advance\@ydim\y@diff%
\repeat
\ignorespaces}}
%----------------------------------------------------------------------
%%1.00 .833333 .80 .75 .66666 .60 .50 .40 .33333 .25 .20 .16666
%% .916666 .816666 .775 .708333 .633333 .55 .45 .366666 .291666 .225 .183333
%% 0.0
%%0.083333
%% the first line has absolute slopes corresponding to various permissible
%% integer combinations representing slopes. The second line is the midpoint
%% of all those slopes (attempted to show them in the middle of two entries).
%%
%% \lineslope(x@diff dimen, y@diff dimen)
%% Given base (x@diff) and height (y@diff) in dimensions, determines the
%% closest available slope and returns the two required integers in \@xarg
%% and \@yarg. The given base and height can be ANYTHING, -ve or +ve, or
%% even 0pt. \lineslope knows about (0,1) and (1,0) slopes too and returns
%% correct values if the conditions regarding x@diff & y@diff are obeyed
%% (see NOTE). Used by \drawline. This is the simplest and only way I could
%% figure out to accomplish it!.
%% NOTE: both the dimensions (x@diff & y@diff) must be in SAME units and the
%% larger of the two dimensions must be atleast 1pt (i.e. 65536sp). To avoid
%% dividing by 0, I make the larger dimension = 1pt if it is < 1pt.
%% will need a similar one for vectors, or maybe this can be used. For
%% vectors the range is -4, 4 unlike lines where it is -6, 6.
\newif\if@flippedargs
\def\lineslope(#1,#2){%
\ifdim #1 <0pt \@xdim= -#1 \else\@xdim=#1\fi
\ifdim #2 <0pt \@ydim= -#2 \else\@ydim=#2\fi
%%\typeout{xdim,ydim= \the\@xdim, \the\@ydim}
\ifdim\@xdim >\@ydim \@tempdima=\@xdim \@xdim=\@ydim \@ydim=\@tempdima
\@flippedargstrue\else\@flippedargsfalse\fi% x < y
\ifdim\@ydim >1pt \@tempcnta=\@ydim
\divide\@tempcnta by 65536% now \@tempcnta=integral part of #1.
\divide\@xdim \@tempcnta\fi
\ifdim\@xdim <.083333pt \@xarg=1 \@yarg=0
\else\ifdim\@xdim <.183333pt \@xarg=6 \@yarg=1
\else\ifdim\@xdim <.225pt \@xarg=5 \@yarg=1
\else\ifdim\@xdim <.291666pt \@xarg=4 \@yarg=1
\else\ifdim\@xdim <.366666pt \@xarg=3 \@yarg=1
\else\ifdim\@xdim <.45pt \@xarg=5 \@yarg=2
\else\ifdim\@xdim <.55pt \@xarg=2 \@yarg=1
\else\ifdim\@xdim <.633333pt \@xarg=5 \@yarg=3
\else\ifdim\@xdim <.708333pt \@xarg=3 \@yarg=2
\else\ifdim\@xdim <.775pt \@xarg=4 \@yarg=3
\else\ifdim\@xdim <.816666pt \@xarg=5 \@yarg=4
\else\ifdim\@xdim <.916666pt \@xarg=6 \@yarg=5
\else \@xarg=1 \@yarg=1%
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
\if@flippedargs\relax\else\@tempcnta=\@xarg \@xarg=\@yarg
\@yarg=\@tempcnta\fi
\ifdim #1 <0pt \@xarg= -\@xarg\fi
\ifdim #2 <0pt \@yarg= -\@yarg\fi
%%\typeout{closest slope integers = \the\@xarg, \the\@yarg}
}
%----------------------------------------------------------------------
% usage: \drawline[#](x1,y1)(x2,y2)....(xN,yN)
% % # is an optional integer between -100 & infinity.
% \renewcommand{\drawlinestretch}{-50} %ONLY INTEGERS PERMITTED.
%----------------------------------------------------------------------
\newif\if@toosmall
\newif\if@drawit
\newif\if@horvline
\def\drawlinestretch{0} %well, could have used a counter.
% kind of tail recursion.
\def\drawline{\@ifnextchar [{\@idrawline}{\@idrawline[\drawlinestretch]}}
\def\@idrawline[#1](#2,#3){\@ifnextchar ({\@iidrawline[#1](#2,#3)}{\relax}}
\def\@iidrawline[#1](#2,#3)(#4,#5){\@drawline[#1](#2,#3)(#4,#5)%
\@idrawline[#1](#4,#5)}
%
\def\@drawline[#1](#2,#3)(#4,#5){{%
\x@diff=#4\unitlength \advance\x@diff by -#2\unitlength
\y@diff=#5\unitlength \advance\y@diff by -#3\unitlength
%% override any linethickness declarations, and since horiz & vertical lines
%% come out thinner than the slanted ones, assign slightly larger values.
%% default values are: thinlines=0.4pt, thicklines=0.8pt
\ifx\@linefnt\tenln \linethickness{0.5pt} \else \linethickness{0.9pt}\fi
\lineslope(\x@diff,\y@diff)% returns the two integers in \@xarg & \@yarg.
%------
\@toosmalltrue
{\ifdim\x@diff <\z@ \x@diff=-\x@diff\fi
\ifdim\y@diff <\z@ \y@diff=-\y@diff\fi
\ifdim\x@diff >10pt \global\@toosmallfalse\fi
\ifdim\y@diff >10pt \global\@toosmallfalse\fi}
%------
%% For efficiency, if the line is horiz or vertical then we draw it in one
%% shot, only if the stretch is not -ve and the line is not too small.
\@drawitfalse\@horvlinefalse
\ifnum#1 <0 \relax\else\@horvlinetrue\fi
\if@toosmall\@horvlinetrue\fi% to get 'or' condition. We necessarily draw a
% solid line if the line is too small ignoring any -ve stretch.
\if@horvline
\ifdim\x@diff =0pt \put(#2,#3){\ifdim\y@diff >0pt \@linelen=\y@diff \@upline
\else\@linelen=-\y@diff \@downline\fi}%
\else\ifdim\y@diff =0pt
\ifdim\x@diff >0pt \put(#2,#3){\vrule \@height \@halfwidth \@depth
\@halfwidth \@width \x@diff}
\else \put(#4,#5){\vrule \@height \@halfwidth \@depth
\@halfwidth \@width -\x@diff}\fi
\else\@drawittrue\fi\fi % construct the line explicitly
\else\@drawittrue\fi
%-------------------------------
\if@drawit
\ifnum\@xarg< 0 \@negargtrue\else\@negargfalse\fi
\ifnum\@xarg =0 \setbox\@linechar%
\hbox{\hskip -\@halfwidth \vrule \@width \@wholewidth \@height 10.2pt
\@depth \z@}
\else \ifnum\@yarg =0 \setbox\@linechar%
\hbox{\vrule \@height \@halfwidth \@depth \@halfwidth \@width 10.2pt}
\else \if@negarg \@xarg -\@xarg \@yyarg -\@yarg
\else \@yyarg \@yarg\fi
\ifnum\@yyarg >0 \@tempcnta\@yyarg \else \@tempcnta -\@yyarg\fi
\setbox\@linechar\hbox{\@linefnt\@getlinechar(\@xarg,\@yyarg)}%
\fi\fi
%------
\if@toosmall% => it isn't a horiz or vert line and is toosmall.
\@dottedline[\picsquare]{.98\@wholewidth}%
(#2\unitlength,#3\unitlength)(#4\unitlength,#5\unitlength)%
\else
%% following is neat. The last segment takes \wd\@linechar & \ht\@linechar
%% so plot the line as though it were from (#2,#3) to
%% (#4-\wd\@linechar,#5-\ht\@linechar) (i.e. for positive slope; of course,
%% signs are reversed for other slopes). For horizontal & vertical dashes we
%% don't have to subtract the ht & wd resp. since they are already centered.
\ifnum\@xarg=0\relax\else\ifdim\x@diff >\z@ \advance\x@diff -\wd\@linechar
\else\advance\x@diff \wd\@linechar\fi\fi
\ifnum\@yarg=0\relax\else\ifdim\y@diff >\z@\advance\y@diff -\ht\@linechar
\else\advance\y@diff \ht\@linechar\fi\fi
\ifdim\x@diff <\z@ \@x@diff=-\x@diff \else\@x@diff=\x@diff\fi
\ifdim\y@diff <\z@ \@y@diff=-\y@diff \else\@y@diff=\y@diff\fi
%%\typeout{x@diff,y@diff=\the\x@diff , \the\y@diff}
\num@segments=0 \num@segmentsi=0
\ifdim\wd\@linechar >1pt
\num@segmentsi=\@x@diff \divide\num@segmentsi \wd\@linechar\fi
\ifdim\ht\@linechar >1pt
\num@segments=\@y@diff \divide\num@segments \ht\@linechar\fi
\ifnum\num@segmentsi >\num@segments \num@segments=\num@segmentsi\fi
\advance\num@segments \@ne %to account for round-off error
%
\ifnum #1=0 \relax \else\ifnum #1 < -99
\typeout{***drawline: reduction <= -100 percent implies blankness!***}
\else\num@segmentsi=#1 \advance\num@segmentsi by 100
\multiply\num@segments \num@segmentsi
\divide\num@segments by 100
\ifnum \num@segments=0 \num@segments=1 \fi
\fi\fi
%%\typeout{num@segments after = \the\num@segments}
%
\divide\x@diff \num@segments
\divide\y@diff \num@segments
\advance\num@segments \@ne %for the last segment for which I subtracted
%\wd & \ht of \@linechar from \@x@diff & \@y@diff.
%%\typeout{numseg,x@diff,y@diff= \the\num@segments, \the\x@diff, \the\y@diff}
%
\@xdim=#2\unitlength \@ydim=#3\unitlength
\if@negarg \advance\@xdim -\wd\@linechar\fi
\ifnum\@yarg <0 \advance\@ydim -\ht\@linechar\fi
%%following loop equiv to \multiput@abs(\@xdim,\@ydim)%
%%(\x@diff,\y@diff){\num@segments}{\copy\@linechar}
%%with arguements in absolute dimensions.
\@killglue
\loop \ifnum\num@segments > 0
\unskip\raise\@ydim\hbox to\z@{\hskip\@xdim \copy\@linechar\hss}%
\advance\num@segments \m@ne\advance\@xdim\x@diff\advance\@ydim\y@diff%
\repeat
\ignorespaces
\fi%the if of @toosmall
\fi}}% for \if@drawit
%----------------------------------------------------------------------
%usage: \putfile{datafile}{OBJECT}
% The OBJECT is plotted at EACH of the coordinates read from the datafile.
% The idea of these macros is to generate (x,y) pairs using some program
% and then directly use those coordinates. Since TeX doesn't have real
% floating point calculations, it is much more efficient and accurate to do
% things this way. One can also use the unix facility 'spline' now to
% generate smooth curves with equidistant ``dots''.
% NOTE: the external file of coordinates must have x y pairs with a space
% between them. Also it is suggested that some extension such as '.put'
% be used for such datafiles to distinguish them in which case it must
% be explicitely specified in the 1st argument so that TeX doesn't look
% for a .tex extension.
% The % char remains valid as a comment char and such lines are ignored;
% however, there should be atleast one space after the second entry if a
% comment is on the same line as data since % eats up the newline.
%-----------------------------------------------------------------------
\long\def\splittwoargs#1 #2 {(#1,#2)}
%
\newif\if@stillmore
\newread\@datafile
\long\def\putfile#1#2{\openin\@datafile = #1
\@stillmoretrue
\loop
\ifeof\@datafile\relax\else\read\@datafile to\@dataline\fi
%if file nonexistent, do nothing.
\ifeof\@datafile\@stillmorefalse
\else\ifx\@dataline\@empty \relax
\else
\expandafter\expandafter\expandafter\put\expandafter\splittwoargs%
\@dataline{#2}
\fi
\fi
\if@stillmore
\repeat
\closein\@datafile
}
%----------------------------------------------------------------------
frontmatter.tex · 4 KB
\addcontentsline{toc}{chapter}{Certification of Approval}
% Page 3 : Approval of the DSC
\thispagestyle{empty}
\begin{center}
\textbf{\Large APPROVAL OF THE VIVA-VOCE BOARD}
\end{center}
\begin{flushright}
DD/MM/YYYY
\end{flushright}
~~~Certified that the thesis entitled \textbf{Write Thesis Title Here}, submitted by \textbf{Student Name} to the Indian Institute of Technology Bhubaneswar, for the award of the degree of Doctor of Philosophy has been accepted by the external examiners and that the student has successfully defended the thesis in the viva-voce examination held today.
\begin{center}
\begin{tabular*}{\textwidth}{@{\extracolsep{\fill}}cccccccc}
&&&&&&&\\
&&&&&&&\\
\multicolumn{2}{c}{(Member of DSC)} && \multicolumn{2}{c}{(Member of DSC)} && \multicolumn{2}{c}{(Member of DSC)}\\
&&&&&&&\\
&&&&&&&\\
\multicolumn{3}{c}{} &&& \multicolumn{3}{c}{(Supervisor)}\\
% Comment the above line and uncomment the lower one if you have two supervisors
% \multicolumn{3}{c}{(Supervisor)} &&& \multicolumn{3}{c}{(Supervisor)}\\
&&&&&&&\\
&&&&&&&\\
\multicolumn{3}{c}{(External Examiner)} &&& \multicolumn{3}{c}{(Chairman)}\\
\end{tabular*}
\end{center}
%% Page 4 : Blank
\newpage
%\thispagestyle{empty}
%\cleardoublepage
\addcontentsline{toc}{chapter}{Certificate}
% Page 5: Certificate on department letterhead
\thispagestyle{empty}
{~} % Buffer blank character to prevent horizontal underflow due to next \vspace
\vspace{10em} % Increase if the dept. letterhead requires more space
\begin{center}
\textbf{\Large CERTIFICATE}
\end{center}
~~~This is to certify that the thesis entitled \textbf{Write Thesis Title Here}, submitted by \textbf{Student Name} to Indian Institute of Technology Bhubaneswar, is a record of bonafide research work under my supervision and I consider it worthy of consideration for the award of the degree of Doctor of Philosophy of the Institute.
\begin{tabular*}{\textwidth}{@{\extracolsep{\fill}}ll}
&\\
&\\
&\\
Date : & \textbf{Supervisor Name}\\
& Designation\\
& School of ******* Sciences \\
& Indian Institute of Technology Bhubaneswar \\
& Bhubaneswar, India \\
% Comment the above line and uncomment the lower one if you have two supervisors
% (Supervisor) & (Supervisor)\\
\end{tabular*}
%% Page 6 : Blank
\newpage
%\thispagestyle{empty}
%\cleardoublepage
\addcontentsline{toc}{chapter}{Declaration}
% Page 7: Declaration
\thispagestyle{empty}
\begin{center}
\textbf{\Large DECLARATION}
\end{center}
I certify that
\begin{enumerate}[a.]
\item the work contained in the thesis is original and has been done by myself under the general supervision of my supervisor.
\item the work has not been submitted to any other institute for any degree or diploma.
\item I have followed the guidelines provided by the institute in writing the thesis.
\item I have conformed to the norms and guidelines given in the ethical code of conduct of the institute.
\item whenever I have used materials (data, theoretical analysis, and text) from other sources, I have given due credit to them by citing them in the text of the thesis and giving their details in the references.
\item whenever I have quoted written materials from other sources, I have put them under quotation marks and given due credit to the sources by citing them and giving required details in the references.
\end{enumerate}
\vspace{4em}
\begin{flushright}
Student Name
\end{flushright}
%% Page 8 : Blank
\newpage
\addcontentsline{toc}{chapter}{Acknowledgments}
% Page 11 : Acknowledgment
\thispagestyle{empty}
\begin{center}
\textbf{\Large Acknowledgments}
\end{center}
Write Acknowledgments Here
\vspace{3em}
\begin{flushright}
Student Name
\end{flushright}
glossary_2.tex · 697 B
\chapter*{List of Abbreviations}
%\renewcommand{\arraystretch}{2}
%\begin{table}[ht]
%\centering
%\begin{tabular}[l]{>{\bfseries}ll}
%\addcontentsline{toc}{chapter}{List of Abbreviations}
\begin{longtable}[l]{>{\bfseries}ll}
%\hline
%%%%% 1
%1G & First generation\\
%%%%% 2
%2G & Second generation\\
%%%% 5
5G & Fifth generation\\
%%%%%%%%%%%%% A
ABER & Average bit error rate\\
ADSL & Asymmetric digital subscriber line\\
AF & Amplify-and-forward \\
ASER & Average symbol error rate\\
AWGN & Additive white Gaussian noise\\
%%%%%%%%%%% B
BER & Bit error rate\\
BFSK & Binary frequency shift keying \\
BPSK & Binary phase shift keying \\
\end{longtable}
% \end{tabular}
% \end{table}
here.sty · 8 KB
%%% ====================================================================
%%% @LaTeX-style-file{
%%% filename = "here.sty",
%%% version = "1.01",
%%% date = "12 June 1992",
%%% time = "15:26:24 BST",
%%% author = "David Carlisle",
%%% address = "Computer Science Department
%%% Manchester University
%%% Oxford Road
%%% Manchester
%%% England
%%% M13 9PL",
%%% telephone = "+44 61 275 6139",
%%% FAX = "+44 61 275 6236",
%%% checksum = "51873 214 1175 8528",
%%% email = "[email protected] (Internet)",
%%% codetable = "ISO/ASCII",
%%% keywords = "LaTeX, figure, table, floats",
%%% supported = "yes",
%%% docstring = "
%%%
%%% here.sty
%%%
%%% A LaTeX style option giving floats a [H] option,
%%% meaning `do not float', or `PUT IT HERE'.
%%%
%%% Documentation requires Mittelbach's doc.sty.
%%%
%%% The checksum field above was produced by
%%% Robert Solovay's checksum utility.",
%%% }
%%% ====================================================================
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% * Version 1, 13 Sept 1991
% * Version 1.01, added \vbox accidently omitted from previous version.
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%<*x>
% This file may be used without modification as a style (.sty) file.
%
% If you have Mittelbach's doc.sty, this file may be formatted with a
% command like:
% latex here.sty
%
% If you have the Mittelbach/Duchier/Braams docstrip utility, you may
% produce a faster loading .sty file. Rename this file to: here.doc
% Then run this file through *plain* TeX:
% tex here.doc
% This should produce the file here.sty.
% If you do not have plain TeX on your system, you can trick LaTeX into
% doing the work as follows:
% latex \def\fmtname{plain} \input here.doc
% Note that you may need to quote the arguments here to stop your
% operating system treating the \ characters incorrectly.
%
% latex here.doc
% Will produce a typeset version of the documentation, as above.
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\plain{plain}\ifx\fmtname\plain\csname fi\endcsname
\def\batchfile{here.doc}
\input docstrip
\preamble
Do not distribute the stripped version of this file.
The checksum in the header refers to the documented version.
\endpreamble
\generateFile{here.sty}{t}{\from{here.doc}{}}
\endinput
\fi
%
\ifcat a\noexpand @\let\next\relax\else\def\next{%
\documentstyle[here,doc]{article}\MakePercentIgnore}\fi\next
%
%\def\eatmodule<#1>{}\eatmodule
%</x>
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% \textwidth=355pt ^^A Allow macrocode text with 72 columns.
% \CodelineIndex ^^A Code lines numbered.
% \DisableCrossrefs ^^A No Cross references.
% \MakeShortVerb{\|} ^^A |\foo| works like \verb+\foo+
%
% \title{here.sty}
% \author{D. P. Carlisle}
% \date{12 June 1992}
% \begin{document}
% \maketitle
% \begin{abstract}
% {\tt here.sty} gives environments such as {\tt figure} and {\tt table}
% a {\tt [H]} option which means `PUT IT HERE'. As opposed to the
% standard {\tt [h]} option which means `You may put it here if you
% wish'.
% \end{abstract}
%
% \begin{figure}[H]
% This figure will not float, even if this causes a bad page break.
% \caption{It may be captioned as usual.}
% \end{figure}
%
% Many people have problems with \LaTeX's floating environments. A
% common complaint is that all the environments appear at the end of the
% document (or chapter). Many users try to correct this behaviour by
% using the {\tt [h]} option. Incorect use of this option, in particular
% using just {\tt [h]} rather than a more liberal option such as {\tt
% [hp]} actually makes the problem worse!
%
% \LaTeX\ will only position a float (even one with the {\tt [h]}
% option) in a position which does not violate the rules for float
% placement set by the document style. These rules are determined by the
% following parameters:
%
% \begin{table}[H]
% \begin{tabular}{lp{220pt}}
% |\c@topnumber|& Number of floats allowed at the top of a
% column.\\
% |\topfraction|& Fraction of column that can be devoted to
% floats.\\
% |\c@dbltopnumber|\\ \verb|\dbltopfraction|& Same as above, but for
% double-column floats.\\
% |\c@bottomnumber|\\ \verb|\bottomfraction|& Same as above for
% bottom of page.\\
% |\c@totalnumber|& Number of floats allowed in a single column,\\
% & including in-text floats.\\
% |\textfraction|& Minimum fraction of column that must contain
% text.\\
% |\floatpagefraction|& Minimum fraction of page that must be taken
% up by a float page.\\
% |\dblfloatpagefraction|&As above, for double-column floats.
% \end{tabular}
% \caption{\LaTeX`s float placement parameters}
% \end{table}
%
% The default settings (in {\tt article.doc} for {\tt article} style)
% for these parameters make it difficult to set floats if the document
% has a lot of small floats. The result is that \LaTeX\ `holds them
% back' in the hope of finding a better place later. At the end of the
% document (or at a |\clearpage|) it gives up and outputs all the
% remaining floats.
%
% It may be seen from the above paragraph that the `correct' way to
% handle float problems is to write a style file modifying these
% parameters, however for many purposes, authors to not want a float at
% all, they just use the {\tt figure} or {\tt table} environments to get
% the correct spacing, and a counter that may be referenced. This style
% option provides an easy solution in this case. If the {\tt [H]} option
% is specified, the environment will not float even if it causes a bad
% page break, or breaks the rules specified in the above parameters. The
% main drawback is that if the [H] option is used in one figure, and the
% following figure uses the {\tt [t]} option, then the second figure may
% float in front of the first.
%
% Note that the {\tt [H]} should not be used in conjunction with the
% other options. {\tt [Htp]} is not allowed by this style. The {\tt h}
% option may still be used, so {\tt [htp]} is OK.
% \typeout{End of the Introduction and Examples.}
% \typein[\answer]%
% {Do you want an annotated listing of the macro definitions (y/n) ?}
% \def\next{y}\ifx\answer\next\else\expandafter\stop\fi
%
% \section{The Macros}
% First we make sure that this file is only loaded once.
% \begin{macrocode}
\ifx\@Hxfloat\@Hundef\else\expandafter\endinput\fi
% \end{macrocode}
%
% \begin{macro}{\@Hxfloat}
% Now we can save the original version of |\@xfloat|.
% \begin{macrocode}
\let\@Hxfloat\@xfloat
% \end{macrocode}
% \end{macro}
% \begin{macro}{\@xfloat}
% The new version of |@xfloat| looks for a |[H]| argument.
% If it is present |\@HHfloat| is called, otherwise the original macro
% (renamed to |\@Hfloat|) is called.
% \begin{macrocode}
\def\@xfloat#1[{\@ifnextchar{H}{\@HHfloat{#1}[}{\@Hxfloat{#1}[}}
% \end{macrocode}
% \end{macro}
% \begin{macro}{\@HHfloat}
% First gobble the |[H]|. Note that {\tt H} should not be used in
% conjunction with the other placement options, nor as the value of the
% default placement, as set in |\fps@|{\it type}.
% \begin{macrocode}
\def\@HHfloat#1[H]{%
% \end{macrocode}
% Locally redefine the end of the environment.
% \begin{macrocode}
\expandafter\let\csname end#1\endcsname\end@Hfloat
% \end{macrocode}
% Add the vertical space, and define |\caption|. Also reset
% |\parindent| for compatibility with the standard {\tt [h]} option.
% \begin{macrocode}
\vskip\intextsep\vbox\bgroup\def\@captype{#1}\parindent\z@
% \end{macrocode}
% The final |\ignorespaces| is needed to gobble any spaces or newlines
% after the {\tt[H]} tokens.
% \begin{macrocode}
\ignorespaces}
% \end{macrocode}
% \end{macro}
% \begin{macro}{\end@Hfloat}
% Add the same vertical space as would be added by a float placed with
% {\tt[h]}.
% \begin{macrocode}
\def\end@Hfloat{\egroup\vskip \intextsep}
% \end{macrocode}
% \end{macro}
% \end{document}iitbbs.png — binary, 129 KB
jacket.tex · 1 KB
\documentclass{iitkgpthesis}
% Jacket front
\begin{document}
\thispagestyle{empty}
\begin{center}
\large PERFORMANCE OF COOPERATIVE COMMUNICATION SYSTEMS
\end{center}
% Uncomment the following if a third line is required
\vspace{-2.5em}
\begin{center}
\large OVER SYMMETRIC AND MIXED FADING CHANNELS
\end{center}
% \vspace{-2.5em}
% \begin{center}
% \large OF ELECTROCARDIOGRAM SIGNALS
% \end{center}
\vfill
\begin{flushright}
\textbf{\textit{Udit Satija}}
\end{flushright}
% The tricky spine
\newpage
\thispagestyle{empty}
\begin{landscape}
\begin{tabular*}{15in}{p{15mm}p{4mm}p{170mm}p{50mm}p{4mm}p{2mm}p{4mm}}
&&&&&&\\
{\begin{rotate}{0}{~}\textbf{Ph.D.}\end{rotate}} \newline {\begin{rotate}{0}\textbf{\hspace{-0.04cm} Thesis}\end{rotate}} &
&
\textbf{AUTOMATED NOISE DETECTION AND CLASSIFICATION METHODS FOR} \newline {\begin{rotate}{0}\textbf{ ~~QUALITY-AWARE ANALYSIS OF ELECTROCARDIOGRAM SIGNALS}\end{rotate}} & \quad
{\begin{rotate}{0}{~}\textbf{Udit Satija}\end{rotate}} \newline {\begin{rotate}{0}\textbf{~~~~~~ 2018}\end{rotate}} &
&
&
\\
&&&&&&\\
&&&&&&\\
\end{tabular*}
\end{landscape}
% Jacket back
\newpage
\thispagestyle{empty}
{~}
\vfill
\begin{center}
\includegraphics[scale=0.15]{iitbbs}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{School of Electrical Sciences}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{Indian Institute of Technology Bhubaneswar}
\end{center}
\vspace{-3em}
\begin{center}
\textbf{India -- 752050}
\end{center}
\end{document}notoccite.sty · 2 KB
% notoccite.sty no t.o.c. cite Jul 20, 2000
% Donald Arseneau [email protected] TRIUMF, Vancouver, Canada,
% This is unrestricted software contributed to the public domain.
%
% Ordinarily, cites used in titles or figure captions also appear in
% the table of contents and list of figures. If you then run bibtex
% using the unsrt (unsorted) style, they get numbered starting from 1,
% not the number they should have in the main text.
%
% A good option is to avoid cites in titles, and to specify optional
% caption text without cites:
% \caption [Picture of a bird.]{Picture of a bird \cite{audobon}.}
%
% If you must use moving cites, you could manage them by deleting toc
% and lof files, then running latex once, then bibtex. However, the
% following definition fixes the problem so you don't need to worry
% about that.
%
% *NOTE* This definition works for the ordinary LaTeX definitions
% for \cite and others (\addtocontents, \label) but it may well
% fail when used with various packages for citations or cross
% references.
%
% It works by locally setting \@fileswfalse, which is something like
% \nofiles, but \@fileswfalse does not affect \label or \addtocontents.
% \nofiles does most of its work by redefining \protected@write, and
% neither \addtocontents nor \label check for \if@filesw. \cite *does*
% check \if@filesw.
\ProvidesPackage{notoccite}[2000/07/20]
\def\@starttoc#1{%
\begingroup
\@fileswfalse
\makeatletter
\@input{\jobname.#1}%
\endgroup
\if@filesw
\expandafter\newwrite\csname tf@#1\endcsname
\immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
\fi
\@nobreakfalse
}
psfig.sty · 28 KB
% Psfig/TeX
\def\PsfigVersion{1.10}
\def\setDriver{\DvipsDriver} % \DvipsDriver or \OzTeXDriver
%
% All software, documentation, and related files in this distribution of
% psfig/tex are Copyright 1993 Trevor J. Darrell
%
% Permission is granted for use and non-profit distribution of psfig/tex
% providing that this notice is clearly maintained. The right to
% distribute any portion of psfig/tex for profit or as part of any commercial
% product is specifically reserved for the author(s) of that portion.
%
% To use with LaTeX, use \documentstyle[psfig,...]{...}
% To use with TeX, use \input psfig.sty
%
% Bugs and improvements to [email protected].
%
% Thanks to Ned Batchelder, Greg Hager (GDH), J. Daniel Smith (JDS),
% Tom Rokicki (TR), Robert Russell (RR), George V. Reilly (GVR),
% Ken McGlothlen (KHC), Baron Grey (BG), Gerhard Tobermann (GT).
% and all others who have contributed code and comments to this project!
%
% ======================================================================
% Modification History:
%
% 9 Oct 1990 JDS used more robust bbox reading code from Tom Rokicki
% 29 Mar 1991 JDS implemented rotation= option
% 25 Jun 1991 RR if bb specified on cmd line don't check
% for .ps file.
% 3 Jul 1991 JDS check if file already read in once
% 4 Sep 1991 JDS fixed incorrect computation of rotated
% bounding box
% 25 Sep 1991 GVR expanded synopsis of \psfig
% 14 Oct 1991 JDS \fbox code from LaTeX so \psdraft works with TeX
% changed \typeout to \ps@typeout
% 17 Oct 1991 JDS added \psscalefirst and \psrotatefirst
% 23 Jun 1993 KHC ``doclip'' must appear before ``rotate''
% 27 Oct 1993 TJD removed printing of filename to avoid
% underscore problems. changed \frame to \fbox.
% Added OzTeX support from BG. Added new
% figure search path code from GT.
%
% ======================================================================
%
% Command synopsis:
%
% \psdraft draws an outline box, but doesn't include the figure
% in the DVI file. Useful for previewing.
%
% \psfull includes the figure in the DVI file (default).
%
% \psscalefirst width= or height= specifies the size of the figure
% before rotation.
% \psrotatefirst (default) width= or height= specifies the size of the
% figure after rotation. Asymetric figures will
% appear to shrink.
%
% \psfigurepath{dir:dir:...} sets the path to search for the figure
%
% \psfig
% usage: \psfig{file=, figure=, height=, width=,
% bbllx=, bblly=, bburx=, bbury=,
% rheight=, rwidth=, clip=, angle=, silent=}
%
% "file" is the filename. If no path name is specified and the
% file is not found in the current directory,
% it will be looked for in directory \psfigurepath.
% "figure" is a synonym for "file".
% By default, the width and height of the figure are taken from
% the BoundingBox of the figure.
% If "width" is specified, the figure is scaled so that it has
% the specified width. Its height changes proportionately.
% If "height" is specified, the figure is scaled so that it has
% the specified height. Its width changes proportionately.
% If both "width" and "height" are specified, the figure is scaled
% anamorphically.
% "bbllx", "bblly", "bburx", and "bbury" control the PostScript
% BoundingBox. If these four values are specified
% *before* the "file" option, the PSFIG will not try to
% open the PostScript file.
% "rheight" and "rwidth" are the reserved height and width
% of the figure, i.e., how big TeX actually thinks
% the figure is. They default to "width" and "height".
% The "clip" option ensures that no portion of the figure will
% appear outside its BoundingBox. "clip=" is a switch and
% takes no value, but the `=' must be present.
% The "angle" option specifies the angle of rotation (degrees, ccw).
% The "silent" option makes \psfig work silently.
%
% ======================================================================
% check to see if macros already loaded in (maybe some other file says
% "\input psfig") ...
\ifx\undefined\psfig\else\endinput\fi
%
% from a suggestion by [email protected] to allow
% loading as a style file. Changed to avoid problems
% with amstex per suggestion by [email protected]
\let\LaTeXAtSign=\@
\let\@=\relax
\edef\psfigRestoreAt{\catcode`\@=\number\catcode`@\relax}
%\edef\psfigRestoreAt{\catcode`@=\number\catcode`@\relax}
\catcode`\@=11\relax
\newwrite\@unused
\def\ps@typeout#1{{\let\protect\string\immediate\write\@unused{#1}}}
\def\DvipsDriver{
\ps@typeout{psfig/tex \PsfigVersion -dvips}
\def\PsfigSpecials{\DvipsSpecials} \def\ps@dir{/}
\def\ps@predir{} }
\def\OzTeXDriver{
\ps@typeout{psfig/tex \PsfigVersion -oztex}
\def\PsfigSpecials{\OzTeXSpecials}
\def\ps@dir{:}
\def\ps@predir{:}
\catcode`\^^J=5
}
%% Here's how you define your figure path. Should be set up with null
%% default and a user useable definition.
\def\figurepath{./:}
\def\psfigurepath#1{\edef\figurepath{#1:}}
%%% inserted for Searching Unixpaths
%%% (the path must end with :)
%%% (call: \DoPaths\figurepath )
%%%------------------------------------------------------
\def\DoPaths#1{\expandafter\EachPath#1\stoplist}
%
\def\leer{}
\def\EachPath#1:#2\stoplist{% #1 part of the list (delimiter :)
\ExistsFile{#1}{\SearchedFile}
\ifx#2\leer
\else
\expandafter\EachPath#2\stoplist
\fi}
%
% exists the file (does not work for directories!)
%
\def\ps@dir{/}
\def\ExistsFile#1#2{%
\openin1=\ps@predir#1\ps@dir#2
\ifeof1
\closein1
%\ps@typeout{...not: \ps@predir#1\ps@dir#2}
\else
\closein1
%\ps@typeout{...in: \ps@predir#1\ps@dir#2}
\ifx\ps@founddir\leer
%\ps@typeout{set founddir #1}
\edef\ps@founddir{#1}
\fi
\fi}
%------------------------------------------------------
%
% Get dir in path or error
%
\def\get@dir#1{%
\def\ps@founddir{}
\def\SearchedFile{#1}
\DoPaths\figurepath
% \fi
}
%------------------------------------------------------
%%% END of Searching Unixpaths
%
% @psdo control structure -- similar to Latex @for.
% I redefined these with different names so that psfig can
% be used with TeX as well as LaTeX, and so that it will not
% be vunerable to future changes in LaTeX's internal
% control structure,
%
\def\@nnil{\@nil}
\def\@empty{}
\def\@psdonoop#1\@@#2#3{}
\def\@psdo#1:=#2\do#3{\edef\@psdotmp{#2}\ifx\@psdotmp\@empty \else
\expandafter\@psdoloop#2,\@nil,\@nil\@@#1{#3}\fi}
\def\@psdoloop#1,#2,#3\@@#4#5{\def#4{#1}\ifx #4\@nnil \else
#5\def#4{#2}\ifx #4\@nnil \else#5\@ipsdoloop #3\@@#4{#5}\fi\fi}
\def\@ipsdoloop#1,#2\@@#3#4{\def#3{#1}\ifx #3\@nnil
\let\@nextwhile=\@psdonoop \else
#4\relax\let\@nextwhile=\@ipsdoloop\fi\@nextwhile#2\@@#3{#4}}
\def\@tpsdo#1:=#2\do#3{\xdef\@psdotmp{#2}\ifx\@psdotmp\@empty \else
\@tpsdoloop#2\@nil\@nil\@@#1{#3}\fi}
\def\@tpsdoloop#1#2\@@#3#4{\def#3{#1}\ifx #3\@nnil
\let\@nextwhile=\@psdonoop \else
#4\relax\let\@nextwhile=\@tpsdoloop\fi\@nextwhile#2\@@#3{#4}}
%
% \fbox is defined in latex.tex; so if \fbox is undefined, assume that
% we are not in LaTeX.
% Perhaps this could be done better???
\ifx\undefined\fbox
% \fbox code from modified slightly from LaTeX
\newdimen\fboxrule
\newdimen\fboxsep
\newdimen\ps@tempdima
\newbox\ps@tempboxa
\fboxsep = 3pt
\fboxrule = .4pt
\long\def\fbox#1{\leavevmode\setbox\ps@tempboxa\hbox{#1}\ps@tempdima\fboxrule
\advance\ps@tempdima \fboxsep \advance\ps@tempdima \dp\ps@tempboxa
\hbox{\lower \ps@tempdima\hbox
{\vbox{\hrule height \fboxrule
\hbox{\vrule width \fboxrule \hskip\fboxsep
\vbox{\vskip\fboxsep \box\ps@tempboxa\vskip\fboxsep}\hskip
\fboxsep\vrule width \fboxrule}
\hrule height \fboxrule}}}}
\fi
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% file reading stuff from epsf.tex
% EPSF.TEX macro file:
% Written by Tomas Rokicki of Radical Eye Software, 29 Mar 1989.
% Revised by Don Knuth, 3 Jan 1990.
% Revised by Tomas Rokicki to accept bounding boxes with no
% space after the colon, 18 Jul 1990.
% Portions modified/removed for use in PSFIG package by
% J. Daniel Smith, 9 October 1990.
%
\newread\ps@stream
\newif\ifnot@eof % continue looking for the bounding box?
\newif\if@noisy % report what you're making?
\newif\if@atend % %%BoundingBox: has (at end) specification
\newif\if@psfile % does this look like a PostScript file?
%
% PostScript files should start with `%!'
%
{\catcode`\%=12\global\gdef\epsf@start{%!}}
\def\epsf@PS{PS}
%
\def\epsf@getbb#1{%
%
% The first thing we need to do is to open the
% PostScript file, if possible.
%
\openin\ps@stream=\ps@predir#1
\ifeof\ps@stream\ps@typeout{Error, File #1 not found}\else
%
% Okay, we got it. Now we'll scan lines until we find one that doesn't
% start with %. We're looking for the bounding box comment.
%
{\not@eoftrue \chardef\other=12
\def\do##1{\catcode`##1=\other}\dospecials \catcode`\ =10
\loop
\if@psfile
\read\ps@stream to \epsf@fileline
\else{
\obeyspaces
\read\ps@stream to \epsf@tmp\global\let\epsf@fileline\epsf@tmp}
\fi
\ifeof\ps@stream\not@eoffalse\else
%
% Check the first line for `%!'. Issue a warning message if its not
% there, since the file might not be a PostScript file.
%
\if@psfile\else
\expandafter\epsf@test\epsf@fileline:. \\%
\fi
%
% We check to see if the first character is a % sign;
% if so, we look further and stop only if the line begins with
% `%%BoundingBox:' and the `(atend)' specification was not found.
% That is, the only way to stop is when the end of file is reached,
% or a `%%BoundingBox: llx lly urx ury' line is found.
%
\expandafter\epsf@aux\epsf@fileline:. \\%
\fi
\ifnot@eof\repeat
}\closein\ps@stream\fi}%
%
% This tests if the file we are reading looks like a PostScript file.
%
\long\def\epsf@test#1#2#3:#4\\{\def\epsf@testit{#1#2}
\ifx\epsf@testit\epsf@start\else
\ps@typeout{Warning! File does not start with `\epsf@start'. It may not be a PostScript file.}
\fi
\@psfiletrue} % don't test after 1st line
%
% We still need to define the tricky \epsf@aux macro. This requires
% a couple of magic constants for comparison purposes.
%
{\catcode`\%=12\global\let\epsf@percent=%\global\def\epsf@bblit{%BoundingBox}}
%
%
% So we're ready to check for `%BoundingBox:' and to grab the
% values if they are found. We continue searching if `(at end)'
% was found after the `%BoundingBox:'.
%
\long\def\epsf@aux#1#2:#3\\{\ifx#1\epsf@percent
\def\epsf@testit{#2}\ifx\epsf@testit\epsf@bblit
\@atendfalse
\epsf@atend #3 . \\%
\if@atend
\if@verbose{
\ps@typeout{psfig: found `(atend)'; continuing search}
}\fi
\else
\epsf@grab #3 . . . \\%
\not@eoffalse
\global\no@bbfalse
\fi
\fi\fi}%
%
% Here we grab the values and stuff them in the appropriate definitions.
%
\def\epsf@grab #1 #2 #3 #4 #5\\{%
\global\def\epsf@llx{#1}\ifx\epsf@llx\empty
\epsf@grab #2 #3 #4 #5 .\\\else
\global\def\epsf@lly{#2}%
\global\def\epsf@urx{#3}\global\def\epsf@ury{#4}\fi}%
%
% Determine if the stuff following the %%BoundingBox is `(atend)'
% J. Daniel Smith. Copied from \epsf@grab above.
%
\def\epsf@atendlit{(atend)}
\def\epsf@atend #1 #2 #3\\{%
\def\epsf@tmp{#1}\ifx\epsf@tmp\empty
\epsf@atend #2 #3 .\\\else
\ifx\epsf@tmp\epsf@atendlit\@atendtrue\fi\fi}
% End of file reading stuff from epsf.tex
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% trigonometry stuff from "trig.tex"
\chardef\psletter = 11 % won't conflict with \begin{letter} now...
\chardef\other = 12
\newif \ifdebug %%% turn me on to see TeX hard at work ...
\newif\ifc@mpute %%% don't need to compute some values
\c@mputetrue % but assume that we do
\let\then = \relax
\def\r@dian{pt }
\let\r@dians = \r@dian
\let\dimensionless@nit = \r@dian
\let\dimensionless@nits = \dimensionless@nit
\def\internal@nit{sp }
\let\internal@nits = \internal@nit
\newif\ifstillc@nverging
\def \Mess@ge #1{\ifdebug \then \message {#1} \fi}
{ %%% Things that need abnormal catcodes %%%
\catcode `\@ = \psletter
\gdef \nodimen {\expandafter \n@dimen \the \dimen}
\gdef \term #1 #2 #3%
{\edef \t@ {\the #1}%%% freeze parameter 1 (count, by value)
\edef \t@@ {\expandafter \n@dimen \the #2\r@dian}%
%%% freeze parameter 2 (dimen, by value)
\t@rm {\t@} {\t@@} {#3}%
}
\gdef \t@rm #1 #2 #3%
{{%
\count 0 = 0
\dimen 0 = 1 \dimensionless@nit
\dimen 2 = #2\relax
\Mess@ge {Calculating term #1 of \nodimen 2}%
\loop
\ifnum \count 0 < #1
\then \advance \count 0 by 1
\Mess@ge {Iteration \the \count 0 \space}%
\Multiply \dimen 0 by {\dimen 2}%
\Mess@ge {After multiplication, term = \nodimen 0}%
\Divide \dimen 0 by {\count 0}%
\Mess@ge {After division, term = \nodimen 0}%
\repeat
\Mess@ge {Final value for term #1 of
\nodimen 2 \space is \nodimen 0}%
\xdef \Term {#3 = \nodimen 0 \r@dians}%
\aftergroup \Term
}}
\catcode `\p = \other
\catcode `\t = \other
\gdef \n@dimen #1pt{#1} %%% throw away the ``pt''
}
\def \Divide #1by #2{\divide #1 by #2} %%% just a synonym
\def \Multiply #1by #2%%% allows division of a dimen by a dimen
{{%%% should really freeze parameter 2 (dimen, passed by value)
\count 0 = #1\relax
\count 2 = #2\relax
\count 4 = 65536
\Mess@ge {Before scaling, count 0 = \the \count 0 \space and
count 2 = \the \count 2}%
\ifnum \count 0 > 32767 %%% do our best to avoid overflow
\then \divide \count 0 by 4
\divide \count 4 by 4
\else \ifnum \count 0 < -32767
\then \divide \count 0 by 4
\divide \count 4 by 4
\else
\fi
\fi
\ifnum \count 2 > 32767 %%% while retaining reasonable accuracy
\then \divide \count 2 by 4
\divide \count 4 by 4
\else \ifnum \count 2 < -32767
\then \divide \count 2 by 4
\divide \count 4 by 4
\else
\fi
\fi
\multiply \count 0 by \count 2
\divide \count 0 by \count 4
\xdef \product {#1 = \the \count 0 \internal@nits}%
\aftergroup \product
}}
\def\r@duce{\ifdim\dimen0 > 90\r@dian \then % sin(x+90) = sin(180-x)
\multiply\dimen0 by -1
\advance\dimen0 by 180\r@dian
\r@duce
\else \ifdim\dimen0 < -90\r@dian \then % sin(-x) = sin(360+x)
\advance\dimen0 by 360\r@dian
\r@duce
\fi
\fi}
\def\Sine#1%
{{%
\dimen 0 = #1 \r@dian
\r@duce
\ifdim\dimen0 = -90\r@dian \then
\dimen4 = -1\r@dian
\c@mputefalse
\fi
\ifdim\dimen0 = 90\r@dian \then
\dimen4 = 1\r@dian
\c@mputefalse
\fi
\ifdim\dimen0 = 0\r@dian \then
\dimen4 = 0\r@dian
\c@mputefalse
\fi
%
\ifc@mpute \then
% convert degrees to radians
\divide\dimen0 by 180
\dimen0=3.141592654\dimen0
%
\dimen 2 = 3.1415926535897963\r@dian %%% a well-known constant
\divide\dimen 2 by 2 %%% we only deal with -pi/2 : pi/2
\Mess@ge {Sin: calculating Sin of \nodimen 0}%
\count 0 = 1 %%% see power-series expansion for sine
\dimen 2 = 1 \r@dian %%% ditto
\dimen 4 = 0 \r@dian %%% ditto
\loop
\ifnum \dimen 2 = 0 %%% then we've done
\then \stillc@nvergingfalse
\else \stillc@nvergingtrue
\fi
\ifstillc@nverging %%% then calculate next term
\then \term {\count 0} {\dimen 0} {\dimen 2}%
\advance \count 0 by 2
\count 2 = \count 0
\divide \count 2 by 2
\ifodd \count 2 %%% signs alternate
\then \advance \dimen 4 by \dimen 2
\else \advance \dimen 4 by -\dimen 2
\fi
\repeat
\fi
\xdef \sine {\nodimen 4}%
}}
% Now the Cosine can be calculated easily by calling \Sine
\def\Cosine#1{\ifx\sine\UnDefined\edef\Savesine{\relax}\else
\edef\Savesine{\sine}\fi
{\dimen0=#1\r@dian\advance\dimen0 by 90\r@dian
\Sine{\nodimen 0}
\xdef\cosine{\sine}
\xdef\sine{\Savesine}}}
% end of trig stuff
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\psdraft{
\def\@psdraft{0}
%\ps@typeout{draft level now is \@psdraft \space . }
}
\def\psfull{
\def\@psdraft{100}
%\ps@typeout{draft level now is \@psdraft \space . }
}
\psfull
\newif\if@scalefirst
\def\psscalefirst{\@scalefirsttrue}
\def\psrotatefirst{\@scalefirstfalse}
\psrotatefirst
\newif\if@draftbox
\def\psnodraftbox{
\@draftboxfalse
}
\def\psdraftbox{
\@draftboxtrue
}
\@draftboxtrue
\newif\if@prologfile
\newif\if@postlogfile
\def\pssilent{
\@noisyfalse
}
\def\psnoisy{
\@noisytrue
}
\psnoisy
%%% These are for the option list.
%%% A specification of the form a = b maps to calling \@p@@sa{b}
\newif\if@bbllx
\newif\if@bblly
\newif\if@bburx
\newif\if@bbury
\newif\if@height
\newif\if@width
\newif\if@rheight
\newif\if@rwidth
\newif\if@angle
\newif\if@clip
\newif\if@verbose
\def\@p@@sclip#1{\@cliptrue}
%
%
\newif\if@decmpr
%
\def\@p@@sfigure#1{\def\@p@sfile{null}\def\@p@sbbfile{null}\@decmprfalse
% look directly for file (e.g. absolute path)
\openin1=\ps@predir#1
\ifeof1
\closein1
% failed, search directories for file
\get@dir{#1}
\ifx\ps@founddir\leer
% failed, search directly for file.bb
\openin1=\ps@predir#1.bb
\ifeof1
\closein1
% failed, search directories for file.bb
\get@dir{#1.bb}
\ifx\ps@founddir\leer
% failed, lose.
\ps@typeout{Can't find #1 in \figurepath}
\else
% found file.bb in search dir
\@decmprtrue
\def\@p@sfile{\ps@founddir\ps@dir#1}
\def\@p@sbbfile{\ps@founddir\ps@dir#1.bb}
\fi
\else
\closein1
%found file.bb directly
\@decmprtrue
\def\@p@sfile{#1}
\def\@p@sbbfile{#1.bb}
\fi
\else
% found file in search dir
\def\@p@sfile{\ps@founddir\ps@dir#1}
\def\@p@sbbfile{\ps@founddir\ps@dir#1}
\fi
\else
% found file directly
\closein1
\def\@p@sfile{#1}
\def\@p@sbbfile{#1}
\fi
}
%
%
%
\def\@p@@sfile#1{\@p@@sfigure{#1}}
%
\def\@p@@sbbllx#1{
%\ps@typeout{bbllx is #1}
\@bbllxtrue
\dimen100=#1
\edef\@p@sbbllx{\number\dimen100}
}
\def\@p@@sbblly#1{
%\ps@typeout{bblly is #1}
\@bbllytrue
\dimen100=#1
\edef\@p@sbblly{\number\dimen100}
}
\def\@p@@sbburx#1{
%\ps@typeout{bburx is #1}
\@bburxtrue
\dimen100=#1
\edef\@p@sbburx{\number\dimen100}
}
\def\@p@@sbbury#1{
%\ps@typeout{bbury is #1}
\@bburytrue
\dimen100=#1
\edef\@p@sbbury{\number\dimen100}
}
\def\@p@@sheight#1{
\@heighttrue
\dimen100=#1
\edef\@p@sheight{\number\dimen100}
%\ps@typeout{Height is \@p@sheight}
}
\def\@p@@swidth#1{
%\ps@typeout{Width is #1}
\@widthtrue
\dimen100=#1
\edef\@p@swidth{\number\dimen100}
}
\def\@p@@srheight#1{
%\ps@typeout{Reserved height is #1}
\@rheighttrue
\dimen100=#1
\edef\@p@srheight{\number\dimen100}
}
\def\@p@@srwidth#1{
%\ps@typeout{Reserved width is #1}
\@rwidthtrue
\dimen100=#1
\edef\@p@srwidth{\number\dimen100}
}
\def\@p@@sangle#1{
%\ps@typeout{Rotation is #1}
\@angletrue
% \dimen100=#1
\edef\@p@sangle{#1} %\number\dimen100}
}
\def\@p@@ssilent#1{
\@verbosefalse
}
\def\@p@@sprolog#1{\@prologfiletrue\def\@prologfileval{#1}}
\def\@p@@spostlog#1{\@postlogfiletrue\def\@postlogfileval{#1}}
\def\@cs@name#1{\csname #1\endcsname}
\def\@setparms#1=#2,{\@cs@name{@p@@s#1}{#2}}
%
% initialize the defaults (size the size of the figure)
%
\def\ps@init@parms{
\@bbllxfalse \@bbllyfalse
\@bburxfalse \@bburyfalse
\@heightfalse \@widthfalse
\@rheightfalse \@rwidthfalse
\def\@p@sbbllx{}\def\@p@sbblly{}
\def\@p@sbburx{}\def\@p@sbbury{}
\def\@p@sheight{}\def\@p@swidth{}
\def\@p@srheight{}\def\@p@srwidth{}
\def\@p@sangle{0}
\def\@p@sfile{} \def\@p@sbbfile{}
\def\@p@scost{10}
\def\@sc{}
\@prologfilefalse
\@postlogfilefalse
\@clipfalse
\if@noisy
\@verbosetrue
\else
\@verbosefalse
\fi
}
%
% Go through the options setting things up.
%
\def\parse@ps@parms#1{
\@psdo\@psfiga:=#1\do
{\expandafter\@setparms\@psfiga,}}
%
% Compute bb height and width
%
\newif\ifno@bb
\def\bb@missing{
\if@verbose{
\ps@typeout{psfig: searching \@p@sbbfile \space for bounding box}
}\fi
\no@bbtrue
\epsf@getbb{\@p@sbbfile}
\ifno@bb \else \bb@cull\epsf@llx\epsf@lly\epsf@urx\epsf@ury\fi
}
\def\bb@cull#1#2#3#4{
\dimen100=#1 bp\edef\@p@sbbllx{\number\dimen100}
\dimen100=#2 bp\edef\@p@sbblly{\number\dimen100}
\dimen100=#3 bp\edef\@p@sbburx{\number\dimen100}
\dimen100=#4 bp\edef\@p@sbbury{\number\dimen100}
\no@bbfalse
}
% rotate point (#1,#2) about (0,0).
% The sine and cosine of the angle are already stored in \sine and
% \cosine. The result is placed in (\p@intvaluex, \p@intvaluey).
\newdimen\p@intvaluex
\newdimen\p@intvaluey
\def\rotate@#1#2{{\dimen0=#1 sp\dimen1=#2 sp
% calculate x' = x \cos\theta - y \sin\theta
\global\p@intvaluex=\cosine\dimen0
\dimen3=\sine\dimen1
\global\advance\p@intvaluex by -\dimen3
% calculate y' = x \sin\theta + y \cos\theta
\global\p@intvaluey=\sine\dimen0
\dimen3=\cosine\dimen1
\global\advance\p@intvaluey by \dimen3
}}
\def\compute@bb{
\no@bbfalse
\if@bbllx \else \no@bbtrue \fi
\if@bblly \else \no@bbtrue \fi
\if@bburx \else \no@bbtrue \fi
\if@bbury \else \no@bbtrue \fi
\ifno@bb \bb@missing \fi
\ifno@bb \ps@typeout{FATAL ERROR: no bb supplied or found}
\no-bb-error
\fi
%
%\ps@typeout{BB: \@p@sbbllx, \@p@sbblly, \@p@sbburx, \@p@sbbury}
%
% store height/width of original (unrotated) bounding box
\count203=\@p@sbburx
\count204=\@p@sbbury
\advance\count203 by -\@p@sbbllx
\advance\count204 by -\@p@sbblly
\edef\ps@bbw{\number\count203}
\edef\ps@bbh{\number\count204}
%\ps@typeout{ psbbh = \ps@bbh, psbbw = \ps@bbw }
\if@angle
\Sine{\@p@sangle}\Cosine{\@p@sangle}
{\dimen100=\maxdimen\xdef\r@p@sbbllx{\number\dimen100}
\xdef\r@p@sbblly{\number\dimen100}
\xdef\r@p@sbburx{-\number\dimen100}
\xdef\r@p@sbbury{-\number\dimen100}}
%
% Need to rotate all four points and take the X-Y extremes of the new
% points as the new bounding box.
\def\minmaxtest{
\ifnum\number\p@intvaluex<\r@p@sbbllx
\xdef\r@p@sbbllx{\number\p@intvaluex}\fi
\ifnum\number\p@intvaluex>\r@p@sbburx
\xdef\r@p@sbburx{\number\p@intvaluex}\fi
\ifnum\number\p@intvaluey<\r@p@sbblly
\xdef\r@p@sbblly{\number\p@intvaluey}\fi
\ifnum\number\p@intvaluey>\r@p@sbbury
\xdef\r@p@sbbury{\number\p@intvaluey}\fi
}
% lower left
\rotate@{\@p@sbbllx}{\@p@sbblly}
\minmaxtest
% upper left
\rotate@{\@p@sbbllx}{\@p@sbbury}
\minmaxtest
% lower right
\rotate@{\@p@sbburx}{\@p@sbblly}
\minmaxtest
% upper right
\rotate@{\@p@sbburx}{\@p@sbbury}
\minmaxtest
\edef\@p@sbbllx{\r@p@sbbllx}\edef\@p@sbblly{\r@p@sbblly}
\edef\@p@sbburx{\r@p@sbburx}\edef\@p@sbbury{\r@p@sbbury}
%\ps@typeout{rotated BB: \r@p@sbbllx, \r@p@sbblly, \r@p@sbburx, \r@p@sbbury}
\fi
\count203=\@p@sbburx
\count204=\@p@sbbury
\advance\count203 by -\@p@sbbllx
\advance\count204 by -\@p@sbblly
\edef\@bbw{\number\count203}
\edef\@bbh{\number\count204}
%\ps@typeout{ bbh = \@bbh, bbw = \@bbw }
}
%
% \in@hundreds performs #1 * (#2 / #3) correct to the hundreds,
% then leaves the result in @result
%
\def\in@hundreds#1#2#3{\count240=#2 \count241=#3
\count100=\count240 % 100 is first digit #2/#3
\divide\count100 by \count241
\count101=\count100
\multiply\count101 by \count241
\advance\count240 by -\count101
\multiply\count240 by 10
\count101=\count240 %101 is second digit of #2/#3
\divide\count101 by \count241
\count102=\count101
\multiply\count102 by \count241
\advance\count240 by -\count102
\multiply\count240 by 10
\count102=\count240 % 102 is the third digit
\divide\count102 by \count241
\count200=#1\count205=0
\count201=\count200
\multiply\count201 by \count100
\advance\count205 by \count201
\count201=\count200
\divide\count201 by 10
\multiply\count201 by \count101
\advance\count205 by \count201
%
\count201=\count200
\divide\count201 by 100
\multiply\count201 by \count102
\advance\count205 by \count201
%
\edef\@result{\number\count205}
}
\def\compute@wfromh{
% computing : width = height * (bbw / bbh)
\in@hundreds{\@p@sheight}{\@bbw}{\@bbh}
%\ps@typeout{ \@p@sheight * \@bbw / \@bbh, = \@result }
\edef\@p@swidth{\@result}
%\ps@typeout{w from h: width is \@p@swidth}
}
\def\compute@hfromw{
% computing : height = width * (bbh / bbw)
\in@hundreds{\@p@swidth}{\@bbh}{\@bbw}
%\ps@typeout{ \@p@swidth * \@bbh / \@bbw = \@result }
\edef\@p@sheight{\@result}
%\ps@typeout{h from w : height is \@p@sheight}
}
\def\compute@handw{
\if@height
\if@width
\else
\compute@wfromh
\fi
\else
\if@width
\compute@hfromw
\else
\edef\@p@sheight{\@bbh}
\edef\@p@swidth{\@bbw}
\fi
\fi
}
\def\compute@resv{
\if@rheight \else \edef\@p@srheight{\@p@sheight} \fi
\if@rwidth \else \edef\@p@srwidth{\@p@swidth} \fi
%\ps@typeout{rheight = \@p@srheight, rwidth = \@p@srwidth}
}
%
% Compute any missing values
\def\compute@sizes{
\compute@bb
\if@scalefirst\if@angle
% at this point the bounding box has been adjsuted correctly for
% rotation. PSFIG does all of its scaling using \@bbh and \@bbw. If
% a width= or height= was specified along with \psscalefirst, then the
% width=/height= value needs to be adjusted to match the new (rotated)
% bounding box size (specifed in \@bbw and \@bbh).
% \ps@bbw width=
% ------- = ----------
% \@bbw new width=
% so `new width=' = (width= * \@bbw) / \ps@bbw; where \ps@bbw is the
% width of the original (unrotated) bounding box.
\if@width
\in@hundreds{\@p@swidth}{\@bbw}{\ps@bbw}
\edef\@p@swidth{\@result}
\fi
\if@height
\in@hundreds{\@p@sheight}{\@bbh}{\ps@bbh}
\edef\@p@sheight{\@result}
\fi
\fi\fi
\compute@handw
\compute@resv}
%
%
%
\def\OzTeXSpecials{
\special{empty.ps /@isp {true} def}
\special{empty.ps \@p@swidth \space \@p@sheight \space
\@p@sbbllx \space \@p@sbblly \space
\@p@sbburx \space \@p@sbbury \space
startTexFig \space }
\if@clip{
\if@verbose{
\ps@typeout{(clip)}
}\fi
\special{empty.ps doclip \space }
}\fi
\if@angle{
\if@verbose{
\ps@typeout{(rotate)}
}\fi
\special {empty.ps \@p@sangle \space rotate \space}
}\fi
\if@prologfile
\special{\@prologfileval \space } \fi
\if@decmpr{
\if@verbose{
\ps@typeout{psfig: Compression not available
in OzTeX version \space }
}\fi
}\else{
\if@verbose{
\ps@typeout{psfig: including \@p@sfile \space }
}\fi
\special{epsf=\@p@sfile \space }
}\fi
\if@postlogfile
\special{\@postlogfileval \space } \fi
\special{empty.ps /@isp {false} def}
}
\def\DvipsSpecials{
%
\special{ps::[begin] \@p@swidth \space \@p@sheight \space
\@p@sbbllx \space \@p@sbblly \space
\@p@sbburx \space \@p@sbbury \space
startTexFig \space }
\if@clip{
\if@verbose{
\ps@typeout{(clip)}
}\fi
\special{ps:: doclip \space }
}\fi
\if@angle
\if@verbose{
\ps@typeout{(clip)}
}\fi
\special {ps:: \@p@sangle \space rotate \space}
\fi
\if@prologfile
\special{ps: plotfile \@prologfileval \space } \fi
\if@decmpr{
\if@verbose{
\ps@typeout{psfig: including \@[email protected] \space }
}\fi
\special{ps: plotfile "`zcat \@[email protected]" \space }
}\else{
\if@verbose{
\ps@typeout{psfig: including \@p@sfile \space }
}\fi
\special{ps: plotfile \@p@sfile \space }
}\fi
\if@postlogfile
\special{ps: plotfile \@postlogfileval \space } \fi
\special{ps::[end] endTexFig \space }
}
%
% \psfig
% usage : \psfig{file=, height=, width=, bbllx=, bblly=, bburx=, bbury=,
% rheight=, rwidth=, clip=}
%
% "clip=" is a switch and takes no value, but the `=' must be present.
\def\psfig#1{\vbox {
% do a zero width hard space so that a single
% \psfig in a centering enviornment will behave nicely
%{\setbox0=\hbox{\ }\ \hskip-\wd0}
%
\ps@init@parms
\parse@ps@parms{#1}
\compute@sizes
%
\ifnum\@p@scost<\@psdraft{
\PsfigSpecials
% Create the vbox to reserve the space for the figure.
\vbox to \@p@srheight sp{
% 1/92 TJD Changed from "true sp" to "sp" for magnification.
\hbox to \@p@srwidth sp{
\hss
}
\vss
}
}\else{
% draft figure, just reserve the space and print the
% path name.
\if@draftbox{
% Verbose draft: print file name in box
% 10/93 TJD changed to fbox from frame
\hbox{\fbox{\vbox to \@p@srheight sp{
\vss
\hbox to \@p@srwidth sp{ \hss
% 10/93 TJD deleted to avoid ``_'' problems
% \@p@sfile
\hss }
\vss
}}}
}\else{
% Non-verbose draft
\vbox to \@p@srheight sp{
\vss
\hbox to \@p@srwidth sp{\hss}
\vss
}
}\fi
}\fi
}}
\psfigRestoreAt
\setDriver
\let\@=\LaTeXAtSign
subeqn.sty · 2 KB
%%
%% This is file `subeqn.sty',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% subeqn.dtx (with options: `package')
%%
%% Copyright (C) 1999-2004 Johannes Braams. All rights reserved.
%%
%% This file was generated from file(s) of the subeqn package.
%% -----------------------------------------------------------
%%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%
%% This work has the LPPL maintenance status "maintained".
%%
%% The Current Maintainer of this work is Johannes Braams.
%%
%% This file may only be distributed together with a copy of the
%% subeqn package. You may however distribute the subeqn package
%% without such generated files.
%%
%% The list of all files belonging to the subeqn package is
%% given in the file `manifest.txt.
%%
%% The list of derived (unpacked) files belonging to the distribution
%% and covered by LPPL is defined by the unpacking scripts (with
%% extension .ins) which are part of the distribution.
%% File: `subeqn.dtx'
%% Copyright (C) 1999-2004
%% Donald Arsenau (asnd at reg.triumf.ca),
%% Johannes Braams (TeXniek at braams.cistron.nl)
%%
\NeedsTeXFormat{LaTeX2e}[1998/06/01]
\ProvidesPackage{subeqn}
[2004/04/15 v2.0b subnumbering of equations]
\newenvironment{subequations}{%
\refstepcounter{equation}%
\mathchardef\c@mainequation\c@equation
\protected@edef\themainequation{\theequation}%
\let\theequation\thesubequation
\global\c@equation\z@
}{%
\global\c@equation\c@mainequation
\global\@ignoretrue
}
\newcommand{\thesubequation}{\themainequation\alph{equation}}
\newenvironment{subeqnarray}{%
\subequations
\@ifnextchar\label{\@lab@subeqnarray}{\eqnarray}
}{%
\endeqnarray\endsubequations
}
\newcommand*{\@lab@subeqnarray}[2]{#1{#2}\eqnarray}
\endinput
%%
%% End of file `subeqn.sty'.symbols.tex · 5 KB
\chapter*{List of Symbols}
\begin{longtable}{ll}
%A
% $ F_A \left( \cdot ;\cdot ;\cdot;\cdot\right)$ & Appell hypergeometric function \cite{RyzhikBook}.\\
$|\cdot|$ & Absolute value\\
%B
$\left( {\begin{array}{*{20}c}
k\\ l\\ \end{array}} \right) $ & Binomial coefficient\\
$B(\cdot,\cdot)$ & Beta function\\
%C
$\Phi_2^{(n)}(\cdot)$ & Confluent form of the generalized Lauricella series\\
${}_1F_1(\cdot, \cdot;\cdot)$ & Confluent hypergeometric function \\
$F_{X}(\cdot)$ & Cumulative distribution function of random variable $X$\\
%%%%%%% E
$\mathbb{E}[\cdot]$ & Expectation operator\\
$\text{exp}(\cdot)$ & Exponential\\
\end{longtable}
%\chapter*{List of Symbols}
% \begin{itemize}
% \item Basic arithmetic and calculus notations have standard definitions.
% \end{itemize}
% \section*{Elementary \& Special Functions}
% \begin{tabular}{p{2.5cm} p{12.5cm}}
% \hline\hline
% \textbf{Notation} & \textbf{Definition}\\
% \hline
% \hline
% \\
% $\Gamma(x)$ & $= \displaystyle \int_{0}^{\infty} \textmd{e}^{-z}\, z^{x-1}\, dz$ denotes the Gamma function\\
% $\Upsilon(x,y)$ & $=\, \displaystyle \int_{0}^{y} \textmd{e}^{-t}\, t^{x-1}\, dt$ represents the lower incomplete Gamma function\\
% $\Gamma(x,y)$ & $=\,\, \displaystyle\int_{y}^{\infty} \textmd{e}^{-t}\, t^{x-1}\, dt$ represents the upper incomplete Gamma function\\
% $\mathcal{K}_{\upsilon}(x)$ & $= \displaystyle\frac{1}{2}\left(\frac{x}{2}\right)^{\upsilon} \int_{0}^{\infty} \frac{\textmd{e}^{-t-\frac{x^{2}}{4 t}}}{t^{\upsilon+1}} dt$ represents the modified Bessel function of the second kind of order $\upsilon$\\
% %$E_{n}(x)$ & $= \displaystyle\int_{1}^{\infty}\frac{\textmd{e}^{-x t}}{t^{n}}dt$ denotes the exponential integral function of order $n$\\
% $_{1}F_{1}(x,y;z)$ & $=\displaystyle\,\, \sum_{k=0}^{\infty}\frac{(x)_{k}}{(y)_{k}}\frac{z^{k}}{k!}$ represents the confluent hypergeometric function of first kind\\
% $_{2}F_{1}(x,y;w;z)$ & $= \displaystyle \sum_{k=0}^{\infty}\frac{(x)_{k}(y)_{k}}{(w)_{k}}\frac{z^{k}}{k!}$ represents the Gauss hypergeometric function\\
% %$I_{0}(x)$ & $= \displaystyle \sum_{k=0}^{\infty} \frac{(x/2)^{2 k}}{(k!)^{2}}$ denotes the zero-order modified Bessel function of the first kind\\
% %$\mathbb{B}(x,y)$ & $= \displaystyle \frac{\Gamma(x)\Gamma(y)}{\Gamma(x+y)}$ denotes the beta function\\
% $(x)_{k}$ & $= \displaystyle \frac{\Gamma(x+k)}{\Gamma(x)}$ denotes the Pochhammer symbol\\
% %$\ln(\cdot)$ & natural logarithm\\
% $Q_{z}(x,\phi)$ & $= \displaystyle \frac{1}{\pi}\int_{0}^{\phi}\exp\Big(-\frac{x^{2}}{2\sin^{2}\theta}\Big)\, d\theta$ represents Gaussian $Q$-function \\
% \\
% \hline
% \end{tabular}
% %\newpage
% %\section*{Vectors and Matrices}
% %Let $\textbf{a}$ denotes the $N$$\times$$1$ complex vector.
% %\\
% %\\
% %\begin{tabular}{p{4cm} p{10cm}}
% %\hline\hline
% %\textbf{Notation} & \textbf{Definition}\\
% %\hline\hline
% %\\
% %$(\textbf{a})^{T}$ & transpose of $\textbf{a}$\\
% %$(\textbf{a})^{\dag}$ & conjugate of $\textbf{a}$\\
% %$(\textbf{\textbf{a}})^{H}$ & Hermitian transpose of $\textbf{a}$\\
% %$\mathbf{I}_{N}$ & $N\times N$ identity matrix\\
% %$\|\textbf{a}\|$ & Frobenius norm of $\textbf{a}$\\
% %\\\hline
% %\end{tabular}
% \section*{Probability \& Statistics}
% Let $X$ be a random variable, and $E$ be an arbitrary event.\\
% \\
% \begin{tabular}{p{4cm} p{10cm}}
% \hline\hline
% \textbf{Notation} & \textbf{Definition}\\
% \hline
% \hline
% \\
% $\mathbb{E}[\cdot]$ & Expectation operatot\\
% $\mathcal{L}[\cdot]$ & Laplace transform operator\\
% $\mathcal{L}^{-1}[\cdot]$ & Laplace transform operator\\
% $f_{X}(\cdot)$ & Probability density function of $X$\\
% %$f_{X|Y}(\cdot)$ & PDF of $X$ given $Y$\\
% $F_{X}(\cdot)$ & Cumulative distribution function of $X$\\
% $\textmd{Pr}[E]$ & Probability of event $E$\\
% % $X\sim\mathcal{CN}(\mu,\Omega)$ & $X$ is complex normal distributed with mean $\mu$ and variance $\Omega$\\
% %$X\sim \textmd{Nak}(m,\Omega)$ & $X$ is Nakagami distributed with fading severity parameter $m$ and average power $\Omega$\\
% \\
% \hline
% \end{tabular}
% \section*{Miscellaneous}
% \begin{tabular}{p{4cm} p{10cm}}
% \hline\hline
% \textbf{Notation} & \textbf{Definition}\\
% \hline\hline
% \\
% $|\cdot|$ & absolute value\\
% $\triangleq$ & equality by definition\\
% $\approx$ & approximate value\\
% $n!$ & factorial of $n$\\
% $(\textbf{a})^{*}$ & complex conjugate of $\textbf{a}$\\
% $\binom{n}{k}$ & binomial coefficient of $n$ choose $k$\\
% $G_{c, d}^{a, b}\left(\cdot\right)$ & represents the Meijer's-$G$ function\\
% $F_{A}^{(n)}(\cdot)$ & represents Lauricella hypergeometric function for $n$ variable\\
% $\arg \displaystyle\max_{i} b_{i}$ & index $i$ corresponding to the largest $b_{i}$\\
% $\arg \displaystyle\min_{i} b_{i}$ & index $i$ corresponding to the smallest $b_{i}$\\
% $\min(b_{1}, b_{2})$ & minimum of scalars $b_{1}$ and $b_{2}$\\
% $\max(b_{1}, b_{2})$ & maximum of scalars $b_{1}$ and $b_{2}$\\
% \\\hline
% \end{tabular}
The first page, as this template compiles today. Click it to enlarge, and again to shrink. Open the file ↗