NANO: Brief Reports and Reviews (brief reports) (World Scientific)

44 KB — too long to show here. It arrives with the project.

\documentclass{ws-nano-reports}
\usepackage{multicol,float}
\begin{document}

\catchline{1}{1}{2006}{}{}
\markboth{Author's Name}{Paper Title}

\title{Your paper}

\author{First Author\footnote{Typeset names in 11 pt Times Roman.
Use the footnote to indicate the present or permanent address of
the author.}}

\address{University Department, University Name, Address\\
City, State ZIP/Zone, Country\footnote{State completely without
abbreviations the affiliation and mailing address, including
country. Typeset in 11~pt Times italics.}\\
\email{fauthor\_id@domain\_name}
}

\author{Second Author}
\address{Group, Company, Address\\
City, State ZIP/Zone, Country\\
\email{sauthor\_id@domain\_name}}

\maketitle

\begin{history}
\received{Day Month Year}
\revised{Day Month Year}
\end{history}

\begin{multicols}{2}
\begin{abstract}
The abstract should summarize the context, content and conclusions
of the paper. It should not contain any references or displayed
equations.
\end{abstract}

\section{The Main Text}
Contributions are to be in English. Authors are encouraged to have
their contribution checked for grammar. American spelling should be
used. Abbreviations are allowed but should be spelt out in full when
first used. Integers ten and below are to be spelt out. Italicize
foreign language phrases (e.g.,~Latin, French).
The text is to be typeset in 11~pt Times \hbox{Roman}, single-spaced
with baselineskip of 13~pt. Text area is 17.8~cm (7 inches) across
and 24.4~cm (9.6 inches) deep (including running title). Final
pagination and insertion of running titles will be done by the
publisher.

\section{Major Headings}
Major headings should be typeset in boldface, with the first letter
of important words capitalized. Use double spacing before major headings.

\section{Lists of Items}
Lists are broadly classified into four major categories that can
randomly be used as desired by the author:
\begin{alphlist}[(d)]
\item Numbered list.
\item Lettered list.
\item Unnumbered list.
\item Bulleted list.
\end{alphlist}

\section{Numbered and Lettered List}

\begin{arabiclist}[(5)]
\item The \verb|\begin{arabiclist}[]| command is used for the arabic
number list (arabic numbers appearing within parenthesis), e.g., (1),
(2), etc.

\smallskip

\item The \verb|\begin{romanlist}[]| command is used for the roman
number list (roman numbers appearing within parenthesis), e.g., (i),
(ii), etc.

\smallskip

\item The \verb|\begin{Romanlist}[]| command is used for the cap roman
\hbox{number list} (cap roman numbers appearing within parenthesis),
e.g., (I), (II), etc.

\smallskip

\item The \verb|\begin{alphlist}[]| command is used for the aliphatic
character list (aliphatic characters appearing within parenthesis),
e.g., (a), (b), etc.

\smallskip

\item The \verb|\begin{Alphlist}[]| command is used for the cap
aliphatic character list (cap aliphatic characters appearing within
parenthesis), e.g., (A), (B), etc.
\end{arabiclist}
Note: For all the above mentioned lists (with the exception of
aliphatic character list), it is obligatory to enter the last
entry's number in the list within the square bracket, to enable unit
alignment.

\section{Bulleted and Unnumbered List}

\begin{enumerate}[(2)]
\item The \verb|\begin{itemlist}| command is used for the bullet list.

\smallskip

\item The \verb|\begin{unnumlist}| command is used for creating the
  unnumbered list with the turnovers hangindent by 1\,pica.
\end{enumerate}

Lists may be laid out with each item marked by a dot:
\begin{itemlist}
\item item one
\item item two
\item item three
\item item four.
\end{itemlist}

Items may also be numbered with lowercase\break Roman numerals:
\begin{romanlist}[(iii)]
\item item one
\item item two
    \begin{romanlist}[(c)]
    \item lists within lists can be numbered with lowercase Roman letters
    \item second item
    \item third item.
    \end{romanlist}
\item item three
\item item four.
\end{romanlist}

\section{Footnotes}
Footnotes should be numbered sequentially in superscript lowercase
Roman letters.\footnote{Footnotes should be typeset in 8 pt Times Roman at the bottom of the page.}

\section{Tables}
Put tables and figures in text using the table and figure environments,
and position them near the first reference of the table or figure in
the text. Please avoid long captions in figures and tables.

\paragraph{Input:}

\begin{verbatim}
\begin{tablehere}
\tbl{... table caption ...}
{\begin{tabular}{@{}lcccr@{}}
\toprule
ID & $m$ & $R^2$ & $x_2$ & Times (s)\\
\colrule
11 & 100 & 3135 & 1138 & $<98$\\
...
15 & 100 & 3135 & 1138 & $<102$\\
\botrule
\end{tabular}}
\label{tbl1}
\end{tablehere}
\end{verbatim}

\noindent {\bf Output:}

\begin{tablehere}%[H]
\tbl{... table caption ...}
{\begin{tabular}{@{}lcccr@{}}
\toprule
ID & $m$ & $R^2$ & $x_2$ & Times (s)\\ \colrule
11 & 100 & 3135 & 1138 & $<98$\\
12 & 100 & 3135 & 1138 & $<99$\\
13 & 100 & 3135 & 1138 & $<100$\\
14 & 100 & 3135 & 1138 & $<101$\\
15 & 100 & 3135 & 1138 & $<102$\\ \botrule
\end{tabular}}\label{tab:smtab}
\end{tablehere}

By using \verb|\tbl| command in table environment, long captions will be justified to the table width while the short or single line captions are centered.
\verb|\tbl{table caption}{tabullar environment}|.

For most tables, the horizontal rules are obtained by:

\begin{tabular}{ll}
{\bf toprule} & one rule at the top\\
{\bf colrule}& one rule separating column heads\\ & from data cells\\
{\bf botrule}& one bottom rule\\
{\bf Hline} & one thick rule at the top and\\ & bottom of the tables with multiple\\& column heads\\
\end{tabular}

To avoid the rules sticking out at either end
of the table, add \verb|@{}| before the first and after the last descriptors, e.g., {@{}llll@{}}. Please avoid vertical rules in tables.
But if you think the vertical rule is a must,
you can use the standard \LaTeX{} \verb|tabular| environment.

\begin{table*}
\tbl{Comparison of acoustic for frequencies for piston-cylinder problem.}
{\begin{tabular}{@{}cccc@{}} \toprule
& Analytical frequency & TRIA6-$S_1$ model &  \\
Piston mass & (Rad/s) & (Rad/s) & \% Error$^{\text a}$ \\ \colrule
1.0\hphantom{00} & \hphantom{0}281.0 & \hphantom{0}280.81 & 0.07 \\
0.1\hphantom{00} & \hphantom{0}876.0 & \hphantom{0}875.74 & 0.03 \\
0.01\hphantom{0} & 2441.0 & 2441.0\hphantom{0} & 0.0\hphantom{0} \\
0.001 & 4130.0 & 4129.3\hphantom{0} & 0.16\\ \botrule
\end{tabular}
}
\begin{tabnote}
$^{\text a}$ Sample table footnote.\\
\end{tabnote}
\label{tbl2}
\end{table*}

Tables should have a uniform style throughout the
contribution. It does not matter how you place the
inner lines of the table, but we would prefer the border lines to be
of the style as shown in our
sample tables. For the inner lines of the table, it looks better
if they are kept to a minimum.

If tables need to extend over to a second page, the continuation
of the table should be preceded by a caption, e.g.,~``Table~1 ({\it
Continued})''.

\section{Figures}
A figure is obtained with the following commands

\begin{verbatim}
\begin{figure}[H]
\centerline{
\includegraphics[width=4cm]{nano-fig1}
}
\caption{...caption here...} \label{fig1}
\end{figure}
\end{verbatim}

\begin{figure}[H]
\centerline{\includegraphics[width=4cm]{nano-fig1}}
\caption{ ... caption here ... }
\label{fig1}
\end{figure}

Figures are to be inserted in the text nearest their
first reference. Original Indian ink drawings of glossy prints are
preferred. Please send one set of originals with copies. If the
publisher is required to reduce the figures, ensure that the
figures (including lettering and numbers) are large enough to be
clearly seen after reduction.

Figures are to be sequentially numbered with\break Arabic
numerals. The caption must be placed below the figure. For those
figures with multiple parts which appear on different pages, it is
best to place the full caption below the first part, and have
e.g.,~``Fig.~1 ({\it Continued})'' below the last part.

Previously published material must be accompanied by written
permission from the author and publisher.

The preferred graphics formats are TIF and Encapsulated PostScript
(EPS) for any type of image. Our \TeX\ installation requires EPS,
but we can easily convert TIF to EPS. Many other formats, e.g., PICT
(Macintosh), WMF (Windows) and various proprietary formats, are not
suitable. Even if we can read such files, there is no guarantee that
they will look the same on our systems as on yours.

Adjust the scaling of the figure until it is correctly positioned,
and remove the declarations of the lines and any anomalous spacing.

We recommend the use of single column-wide tables and figures wherever
possible. Tables and \hbox{figures} spanning two columns can be typeset
with the following environments:

\begin{itemlist}
\item \verb|table*| and
\item \verb|figure*|.
\end{itemlist}

\noindent {\bf Example:}\\[-3pt]

\begin{verbatim}
\begin{table*}
\tbl{Comparison of ...}
{\begin{tabular}{@{}cccc@{}} \toprule
Piston mass & Analytical ...\\ \colrule
1.0... \\
0.001... \\ \botrule
\end{tabular}}
\begin{tabnote}
$^{\text a}$ Sample table footnote.\\
\end{tabnote}
\label{tbl2}
\end{table*}
\end{verbatim}

\begin{sidewaystable*}
\tbl{Positive values of $X_0$ by eliminating $Q_0$ from Eqs.~(15)
and (16) for different values of the parameters $f_0$, $\lambda_0$
and $\alpha_0$ in various dimension.}
{\begin{tabular}{@{}ccccccccccc@{}}
\toprule\\[-8pt]
{}   &  & &\multicolumn{8}{c}{Positive roots ($X_0$)}\\[3pt]
\cline{4-11}\\[-6pt]
$f_0$ & $\lambda_0$ & $\alpha_0$ &4D &5D &6D &7D &8D &10D &12D &16D\\[3.5pt]
\hline\\[-6pt]
$-0.033$ &0.034 &0.1 &6.75507, &4.32936, &3.15991, &2.44524,
&1.92883, &0.669541, &--- &---\\[3.5pt]
&&&1.14476 &1.16321 &1.1879 &1.22434 &1.29065
&0.415056\\[7pt]
$-0.1$ &0.333 &0.2
&3.15662, &1.72737, &--- &--- &--- &--- &--- &---\\[3.5pt]
&&&1.24003 &1.48602\\[7pt]
$-0.301$ &0.302 &0.001
&2.07773, &--- &--- &--- &--- &--- &--- &---\\[3.5pt]
&&&1.65625\\[7pt]
$-0.5$ &0.51 &0.001
&--- &--- &--- &--- &--- &--- &--- &---\\[7pt]
0.1 &0.1 &2&1.667, &1.1946
&--- &--- &--- &--- &--- &---\\[3.5pt]
&&&0.806578 &0.858211\\[7pt]
0.1 &0.1 &10 &0.463679 &0.465426 &0.466489 &0.466499
&0.464947 &0.45438 &0.429651 &0.35278\\[7pt]
0.1 &1 &0.2
&--- &--- &--- &--- &--- &--- &--- &---\\[7pt]
0.1 &5
&5&--- &--- &--- &--- &--- &--- &--- &---\\[7pt]
1 &0.001 &2 &0.996033, &0.968869, &0.91379, &0.848544,&0.783787,
&0.669541,
&0.577489, &---\\[3.5pt]
&&&0.414324 &0.41436 &0.414412 &0.414489 &0.414605
&0.415056 &0.416214\\[7pt]
&0.001 &0.2
&0.316014, &0.309739, &--- &--- &--- &--- &--- &---\\[3.5pt]
&&&0.275327 &0.275856\\[7pt]
&0.1 &5 &0.089435 &0.089441 &0.089435 &0.089409 &0.08935
&0.089061 &0.088347 &0.084352\\[7pt]
&1 &3&0.128192 &0.128966 &0.19718, &0.169063, &0.142103,
&--- &--- &---\\[3.5pt]
&&&& &0.41436 &0.414412 &0.414489\\[3pt]
\Hline
\end{tabular}}
\label{tbl3}
\end{sidewaystable*}

Very large figures and tables should be placed on a separate page by
themselves. Landscape tables and figures can be typeset with the
following environments:

\begin{itemlist}
\item \verb|sidewaystable| and
\item \verb|sidewaysfigure|.
\end{itemlist}

\noindent {\bf Example:}

\begin{verbatim}
\begin{sidewaystable*}
\tbl{Positive values of ...}
{\begin{tabular}{@{}ccccccccccc@{}} ...
\end{tabular}}\label{tbl3}
\end{sidewaystable*}
\end{verbatim}
\end{multicols}
\end{document}